- Home & Workshop Products
Ride control, front loader hydraulic cylinders act as a shock absorber, smoothing travel over rough terrain.
True four-wheel drive on command. Standard limited-slip mechanical-front-wheel drive delivers superior traction in any ground condition. Engage momentary mechanical-front-wheel drive "on the fly" with the touch of a button on the new loader control.
John Deere Power Systems 4.5L engines are designed with replaceable cylinder liners for superior cooling, reduced oil breakdown, and reduced ring wear. This means cooler engine components and longer life as compared to cast-in-block designs.
Standard John Deere PowerShift™ transmission provides on-the-go gear changes; ride control option smoothes moves over rough terrain.
L-Series pilot towers provide more legroom and additional space for transitioning between loader and backhoe operation. Palm-on-top loader-control grip makes operation even easier with integrated electric clutch disconnect and momentary MFWD.
Same-side, ground-level service points help speed daily checks and fills. Other common-sense features such as quick-change filters, extended service intervals, simple-to-read sight gauges, and easy-access grease zerks help increase uptime and lower daily operating costs.
Machine-security system with touchpad passcode helps prevent unauthorized operation.
Craning capacity, or rear backhoe lift, is increased up to 25 percent from the 410K. An additional 10–15-percent increase in craning capacity is activated through Lift Mode at the push of a button on the convenient sealed switch module.
Specs & Compare
|Select up to 4 models to compare specifications||
410L Tier 3
|Engine Manufacturer||John Deere|
|Engine Model||PowerTech E4045HT087|
|Emission Rating||Tier 3|
|Displacement, ltr (Inches³)||4.5 (276)|
|Rated Speed, rpm||2008|
|Engine Output - Net, kW (hp)||77 (103)|
|Service Brake Type||Wet Multi Disc|
|Service Brake Actuation||Hydraulic w/Power Assist|
|Max length with std. Stick, mm (ft/in)||7430 (24 ft 5 in)|
|Height over std Stick, mm (ft/in)||3930 (12 ft 11 in)|
|Height over ext Stick, mm (ft/in)||3930 (12 ft 11 in)|
|Maximum Width, mm (ft/in)||2300 (7 ft 7 in)|
|Width over tires, mm (ft/in)||2180 (7 ft 2 in)|
|Wheelbase - 4WD, mm (ft/in)||2190 (7 ft 2 in)|
|Ground Clearance, mm (inches)||334 (13)|
|Width - General Purpose Shovel, mm (ft/in)||2346 (7 ft 8 in)|
|Bucket Rotation - Position 1, °||180|
|Shovel Pin Height - General Purpose, mm (ft/in)||3450 (11 ft 4 in)|
|Dump Height - General Purpose, mm (ft/in)||2680 (8 ft 10 in)|
|Dump Reach - General Purpose, mm (inches)||750 (29.5)|
|Digging Depth - General Purpose, mm (inches)||157 (6.2)|
|Fuel Tank, ltr (gallons (US))||140.1 (37)|
|Hydraulic Tank, ltr (gallons (US))||45 (11.9)|
|Rear Axle, ltr (gallons (US))||18 (4.75)|
|4WD Front Axle, ltr (gallons (US))||6.5 (1.725)|
|Shovel Capacity - Standard General Purpose, m³ (yd³)||1 (1.31)|
|Battery Voltage, V||12|
|Bucket Tearout - Non-Extending Dipper, kN (lbf)||69.9 (15723)|
|Stick tearout, kN (lbf)||44.1 (9907)|
|Boom Lift - Maximum Reach - Non-Extending Dipper, kg (lbs)||1752 (3863)|
|Shovel Breakout - General Purpose, kN (lbf)||47.3 (10634)|
|Lift To Full Height - General Purpose Shovel, kg (lbs)||3243 (7149)|
|Pump||Axial Piston Pump|
|Pump Flow, lt/min (gallons (US) / min)||159 (42)|
|Operating Weight, kg (lbs)||8068 (17786)|
|Weight - 4WD, GP, std Stick, kg (lbs)||8068 (17786)|
Features and specifications are based on published information at the time of publication. Features and specifications are subject to change without notice.