W52RCommercial Walk-Behind Mower
- 52-inch (132-cm) floating mower deck
- Powerful 19 hp (14.2 kW) V-twin engine
- Self-propelled hydrostatic drive system
- Easy-to-use controls for operator comfort and convenience
For our M & R Series commercial walk-behinds, your hands were what we considered first when designing the controls on these machines. Hand position was important for minimum fatigue. Levers that didn't need constant force to operate. And to slow down or turn, all you need to do is gently squeeze the handles.
Both the M & R Series feature hydrostatic drive systems that provide positive reverse for more power and smoother operation. The infinite ground speed adjustments on both units enables a smoother transition from one speed to another.
For sheer curb climbing ability, you just can’t beat our R Series walk-behinds. With 8 and a half inches of ground clearance and positive reverse performance, the four R Series units bring even the most daunting curbs to their knees. No more scuffed or chipped curbs. And no more damage to the mower.
Specs & Compare | ||||
---|---|---|---|---|
Select up to 4 models to compare specifications | John Deere W52R Commercial Walk-Behind Mower |
Engine manufacturer/model | FX600V | |||
---|---|---|---|---|
Engine power | At 3600 rpm 19 hp* 14.2 kW |
|||
Fuel tank capacity | 5.4 U.S. gal. 21.9 L |
|||
Mower deck Size | 52 in. 132 cm |
|||
Blade tip speed | Approximately 18,000 fpm 5,486 m/min |
|||
Transmission | Two Hydro-Gear™, 0.73-cu in. (10-cc) hydraulic pumps and Danfoss 12 cu-in. (197-cc) wheel motors and ergonomic handles with spring loaded neutral lock | |||
Speed range | Forward, 0-7.5 mph 0-12.1 km/h Reverse, 0-3 mph 0-4.8 km/h |
|||
Drive wheels | 18x8.5-8 | |||
Caster wheels | 9x3.5-4 semi-pneumatic | |||
Warranty | 36 months or 1200 hours, whichever comes first: First 24 months, no hour limitation |
Manufacturer/model | FX600V | |||
---|---|---|---|---|
Power | At 3600 rpm 19.0 hp* 14.2 kW |
|||
Displacement | 36.8 cu in. 603 cc |
|||
Cylinders | V-twin | |||
Crankcase capacity | ||||
Operating speed | 3,600 rpm | |||
Idle Speed | ||||
Ignition/Starter | Electronic/electric start | |||
Valving | Overhead valves | |||
Oil filter | Standard | |||
Lubrication | Full pressure | |||
Governor | Flyweight all speed governor | |||
Hour meter | Standard, digital | |||
Cooling system | Air cooled | |||
Air cleaner | Heavy-duty air cleaner | |||
Muffler | Low tone |
Fuel type | Gasoline | |||
---|---|---|---|---|
Fuel tank capacity | 5.4 U.S. gal. 20.4 L |
|||
Fuel pump | Vacuum-operated diaphragm | |||
Fuel delivery system | Carburetor | |||
Fuel tank switch/Shut off valve | No | |||
Filler neck opening | ||||
Fuel pickup | Top draw |
Ignition | Electronic spark | |||
---|---|---|---|---|
Hourmeter | Standard, digital | |||
Operator presence starting system | PTO off, park brake engaged, speed lever in neutral |
Transmission | Two Hydro-Gear, 0.73-cu in. (10-cc) hydraulic pumps and Danfoss 12 cu-in. (197-cc) wheel motors and ergonomic handles with spring loaded neutral lock | |||
---|---|---|---|---|
Wheel motors | Danfoss 12 cu in. 197 cc |
|||
Shift mechanism | Ergonomic handles with spring-loaded neutral lock |
Drive wheels | 18x8.5-8 | |||
---|---|---|---|---|
Outside to outside tire measurement | ||||
Caster wheels | 9x3.5-4 semi-pneumatic | |||
Shift mechanism |
Forward speeds | Infinite | |||
---|---|---|---|---|
Reverse speeds | Infinite | |||
Speed range | Forward, 0-7.5 mph 0-12.1 km/h Reverse, 0-3 mph 0-4.8 km/h |
Type | Dynamic braking with hand controls, hand lever to set parking brake |
---|
Height | 44.8 in. 114 cm |
|||
---|---|---|---|---|
Length with deck | 74.5 in. 189 cm |
|||
Width | Deflector down - 66 in. 168 cm Deflector up for storage - 56 in. 142 cm |
|||
Weight | 720 lb 327 kg |
Size | Material 10-gauge, 0.14-in. (3.42-mm) fabricated steel deck top with added 10-gauge, 0.14-in. (3.42-mm) spindle mounting plate, 7-gauge, 0.19-in. (4.8-mm) side skirts with reinforcement bar Blades Three high-lift Length - 18 in. 45.7 cm Thickness - 0.25 in. 0.64 cm Blade drive V-Belt Blade tip speed Approximately 18,000 fpm 5,486 m/min Cutting height 1.5-4.5 in. 3.8-11.4 cm 52 in. 132 cm |
---|
Date collected | 11-July-2022 |
---|