Z960MZTrak™ Zero-Turn Mower
- 7-Iron™ PRO Mowing Deck
- Mulch On Demand™ Available
- Gasoline Engine
Specifications | ||||
---|---|---|---|---|
Select up to 4 models to compare specifications | John Deere Z960M ZTrak™ Zero-Turn Mower |
Engine Manufacturer/model | FX921V | |||
---|---|---|---|---|
Engine power | Gross at 3,600 rpm 31 hp 23.1 kW |
|||
Fuel tank capacity | 11.5 U.S. gal. 43.5 L/hr |
|||
Mower deck size | 60-in. (152-cm) 7Iron™ PRO side-discharge 72-in. (183-cm) 7Iron™ PRO side-discharge 60-in. (152-cm) 7Iron™ PRO Mulch On Demand™ 60-in. (152-cm) FastBack™ PRO rear-discharge 72-in. (183-cm) FastBack™ PRO rear-discharge |
|||
Blade tip speed | 7Iron PRO: Approximately 18,500 fpm 60-in. (152-cm) FastBack: Approximately 16,500 fpm 72-in. (183-cm) FastBack: Approximately 18,000 fpm |
|||
Transmission | Hydrostatic | |||
Speed range | 0-12 mph 0-19.3 km/h |
|||
Drive wheels | 24x12-12 | |||
Caster wheels | 13x6.5-6 | |||
Warranty | 36 months or 1200 hours, whichever comes first First 24 months, no hour limitation |
Manufacturer/Model | FX921V | |||
---|---|---|---|---|
Power | Gross at 3,600 rpm 31 hp 23.1 kW |
|||
Displacement | 61 cu in. 999 cc |
|||
Cylinders | Two | |||
Crankcase capacity | With filter, 2 U.S. qt 1.9 L |
|||
Oil filter | Full flow, replaceable | |||
Lubrication | Full pressure | |||
Cooling | Air | |||
Air cleaner | Pre-cleaner Yes Heavy-duty canister type with safety element |
|||
Injection |
Fuel type | Gasoline | |||
---|---|---|---|---|
Fuel consumption | Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr 4.2-7.2 L/hr |
|||
Fuel tank capacity | 11.5 U.S. gal. 43.5 L |
|||
Fuel tank switch/shut-off valve | Yes |
Charge system | 30 amp | |||
---|---|---|---|---|
Battery voltage | 12 V | |||
Cold cranking amp | 300 amp | |||
Hour meter | Standard, digital | |||
Operator presence starting system | Brake-N-Go (hand) |
Transmission | Hydrostatic | |||
---|---|---|---|---|
Hydraulic pumps | ||||
Wheel motors | Tuff Torq heavy-duty integrated piston wheel motor | |||
Travel speed | Speed range 0-12 mph 0-19.3 km/h Forward 0-12 mph 0-19.3 km/h Reverse 0-4.5 mph 0-7.2 km/h |
|||
Speed and direction control | Twin levers | |||
Hydraulic capacity | 5.9 U.S. qt 5.6 L |
|||
Filter | Internal, replaceable | |||
Hydraulic oil cooler |
Warranty | 36 months or 1200 hours, whichever comes first First 24 months, no hour limitation |
---|
Drive wheels | 24x12-12 | |||
---|---|---|---|---|
Rear tires | ||||
Load rating | 4 PR |
Dynamic braking | Twin levers | |||
---|---|---|---|---|
Park brake | Internal wet disk integrated in the transmission | |||
Park brake actuation | Hand brake |
Type | Electro-magnetic, 225 lb-ft 305 Nm |
|||
---|---|---|---|---|
Drive | V-belt |
Size | 60-in. (152-cm) 7Iron™ PRO side-discharge 72-in. (183-cm) 7Iron™ PRO side-discharge 60-in. (152-cm) 7Iron™ PRO Mulch On Demand™ 60-in. (152-cm) FastBack™ PRO rear-discharge 72-in. (183-cm) FastBack™ PRO rear-discharge |
|||
---|---|---|---|---|
Deck construction | 7-Iron™ PRO: 7-gauge, 0.179-in. (4.6-mm) one-piece forged steel FastBack™ PRO: 7-gauge, 0.179-in. (4.6-mm) fabricated steel |
|||
Discharge | ||||
Height-of-cut range | Increments 0.25 in. 0.64 cm 1-5.5 in. 2.54-14 cm |
|||
Cutting width | 60, 72 in. 152, 183 cm |
|||
Deck thickness |
Length | Varies by deck size | |||
---|---|---|---|---|
Thickness | 0.25 in. 0.64 cm |
|||
Blade tip speed | 7Iron PRO: Approximately 18,500 fpm 60-in. (152-cm) FastBack: Approximately 16,500 fpm 72-in. (183-cm) FastBack: Approximately 18,000 fpm |
|||
Number | Three |
Caster wheel type | Flat free | |||
---|---|---|---|---|
Caster wheels | 13x6.5-6 | |||
Front anti-scalp rollers | RH, center, LH | |||
Rear anti-scalp rollers | Standard |
Length | 84 in. 213 cm |
|||
---|---|---|---|---|
Width | With chute down, 74, 86 in. 188, 218 cm Rear discharge, 63.5, 75.8 in. 161.3, 192.5 cm |
|||
Height | With ROPS up, 73 in. 185 cm With ROPS down, 47 in. 119 cm |
|||
Weight | 1,304 to 1,412 lb 591 to 640 kg |
Rollover protective structure (ROPS) | Yes | |||
---|---|---|---|---|
Slope operating limit | 20 degrees (10 degrees with material collection system installed) |
Date collected | 1-Aug-24 |
---|