- Specialty Tractors (75-155 Engine HP)
- Utility Tractors (22.4 - 140 Engine HP)
- Utility Tractor Attachments & Implements
- Home & Workshop Products
Specs & Compare
|Select up to 4 models to compare specifications||
TerrainCut™ Front Mower
PS, 37.4 hp
|Rated engine rpm||3,000 rpm|
|Displacement||100.2 cu in.
|Maximum torque||At 1,950 rpm, 80.4 lb-ft
|Fuel type||Diesel (B20 compatible)|
|Fuel capacity||16 U.S. gal.
|Cooling capacity||8 U.S. qt
|Air cleaner||Dual element dry type|
|Air restriction indicator||Standard|
|Charging system||Automotive type|
|Alternator, amp||75 amp|
|Type||Hydrostatic full time 4WD, on-demand|
|Speed and direction control||Two-pedal foot|
|Hi/Lo range||Yes, Dual speed transmission|
|Hi forward||0-15 mph
|Lo forward||0-8 mph
|Hi reverse||0-5 mph
|Lo reverse||0-5 mph
|4-wheel drive||On demand
|PTO clutch||Wet multi-disk, modulated|
|PTO drive output||2,000 rpm|
|Pump capacity||6.3 U.S. gpm
|Spool valve||Front lift, standard|
|Turns lock-to-lock||2 maximum, 1.5 minimum|
|Type||Internal wet disk|
|Individual turn brakes||Standard|
|Master brake||Standard, locking|
|Ground clearance||7 in.
|Length||Less mower deck, 86.7 in.
|Overall width||55.5 in.
|ROPS certification||2-POST: OSHA 1928; Canadian Std.: CSA-352; 4-POST: SAE J2194; EU Standard: 86/298/EEC; ISO 21299:2009|
|Overall height with ROPS||83.7 in.
|Overall height with ROPS folded||59 in.
|Shipping weight||Net weight, without mower or fuel, 2,120 lb
|Construction||One-piece stamped steel; 7-Iron PRO|
|Deck thickness||7 gauge
|Cutting width||60, 72 in.
152, 183 cm
|Cutting height||1-6 in.
|Belt tensioning||Spring loaded|
|Blade tip speed||18,000 fpm
|Front anti-Scalp rollers||Yes, gauge wheels|
|Rear anti-scalp rollers||Yes, gauge wheels|
|Cutting width||62, 72 in.
157, 183 cm
|Cutting height||1-6 in.
12 Months No-Payments/No-Interest (NP/NI) followed by 17.9% APR/AIR† on New John Deere Front Mowers.
†For complete details regarding this offer, please select the corresponding link.
12 Months No-Payments/No-Interest (NP/NI) followed by 17.9% ACR† on New John Deere Front Mowers.
†For complete details regarding this offer, please select the corresponding link below.
Heater adapter attaches to the engine cylinder block. Heater plugs into a 120-V electrical outlet to warm the engine for fast cold weather starts. It has a 400 W rated output.
The hydraulic weight transfer attachment allows transferring weight of an implement to drive wheels for improved traction in slippery or hilly areas. The hydraulic weight transfer adjustment wheel is located on the control panel to the right of the operator for easy use. It is adjustable from full-off to full-on while on the go.
One-spool auxiliary hydraulic kit for use on snow blowers for chute rotation or blade/broom angling:
This light is required by some governmental agencies and on some worksites. It provides increased visibility of the unit when in operation and mounts to the top of the rollover protective structure (ROPS).
Front worklights mount to the top frame of the four-post ROPS.
The cruise control kit maintains desired speed without foot pressure.
The reverse alarm attachment is available for improved safety and for those who require an alarm in reverse speeds to satisfy safety regulations and governmental bid requirements.
This emblem attaches to the ROPS for transporting on public roads. Available on cab and open-station models.
Gives the operator a view to the rear at a quick glance.
The four-post ROPS consists of two front posts, welded top and bottom assemblies, and a molded roof.
This front windshield mounts to the four-post ROPS.
Attach to drive tires for additional traction in snow and ice.
One or two weights can be installed on each drive wheel if extra traction is desired.
Wheel weights will fit on both the 1400 and 1500 Series II Front Mowers.
Mounting hardware (one) for attaching 72-lb (34-kg) starter weight and (two) 50-lb (22.7-kg) cast-iron weights on 26-in. (66-cm) tire
The 42-lb (19-kg) Quik-Tatch weight can be used to counterbalance a heavy front or rear attachment and/or provide greater stability, especially when operating on hills.
Weights are constructed of cast iron and weigh approximately 42 lb (19 kg) each.
Allows operator to mount ballast weights for additional traction (four R66949 or UC13263 42-lb (19-kg) Quik-Tach weights are recommended for snow blower applications).