19-hp (14.2-kW) engine
Engine oil filter and fuel filter
A 19-hp (14.2-kW) single-cylinder engine has plenty of power and torque to handle tough mulching, mowing, and bagging conditions:
No-tools oil drain valve
No-tools oil drain valve is easy to access when changing engine oil.
Fuel tank gauge
Convenient fuel-filler opening
The fuel tank gauge shows how much fuel is in the tank and can be seen without leaving the operator's seat:
Fuel tank:
Solid one-piece frame
Solid one-piece frame
The solid one-piece frame is constructed of 12-gauge, 0.105-in. (2.66-mm) steel:
Front axle and wheel spindle
The front axle is constructed of solid cast iron that will not bend:
Rear CargO Mount points
Front CargO Mount points
Rear bagger is mounted with CargO Mount points
Rear bagger is mounted with CargO Mount points
The CargO Mount system is a combination of front- and rear-mounting points providing convenient and easy installation of the sun canopy, rear bagger, and other attachments.
Snow blower, weather enclosure, weights, and chains on a 100 Series Tractor
Front blade, weather enclosure, and chains on a 100 Series Tractor
An advantage of lawn tractors is their ability to use equipment for snow removal. Lawn tractor owners can add a John Deere snow blower or front blade to make quick work of moving snow whenever the need arises. Weather enclosure and tire-chain attachments add comfort and performance.
Equipment available for snow removal includes:
Two-pedal speed/direction controls
Forward speed control pedal in use
A Kanzaki® Tuff Torq® hydrostatic transmission gives an infinite choice of speeds and makes changing the direction of travel easy. Side-by-side foot pedals control the speed and direction of travel:
Hydrostatic transmission
Appropriate transmissions are used in each model, depending on rear tire size and tractor performance requirements, to ensure excellent performance and reliability:
Cruise control lever
An easy-to-use cruise control option maintains the tractor's speed for mowing larger areas:
NOTE: Cruise control is available on all models except the E100, E110, and E140.
Kanzaki and Tuff Torq are trademarks of Kanzaki Kokyukoki Manufacturing Company.
Comfortable operator station
Comfortable operator station, left side
The operator station is designed for operator comfort and easy operation:
Steering wheel and dash
Wide footrest with debris-removal channels
Controls are easy to see and use:
Wide footrest areas with non-slip, anti-vibration floor mats are provided for operator comfort:
Comfortable seat
Easily-adjusted seat
The operator seat has an 11-in. (27.9-cm) back height for good support. It can be easily adjusted forward or rearward while in the seat, with seat travel of 5.5 in. (14 cm) and 10 different positions.
Seat springs give a smoother ride
Seat tilted forward (shown on E180 Tractor)
Two long seat springs give plenty of seat travel to smooth out the ride, keeping the operator comfortable while operating the tractor.
The seat can be tilted forward for protection from the elements and to provide easy access to the fuel tank.
Storage compartment (shown with optional cover)
Beverage holder (optional storage compartment cover shown)
Storage compartment and beverage holder, located on the right side fender, are conveniently located and easy to use.
NOTE: A storage compartment cover is standard on E120, E130, E150, E160, E170, and E180 Tractors and optional on the E110 and E140.
E120 Tractor mowing
Steering wheel and controls
The contoured dash has clean, attractive styling:
Hydro/automatic two-pedal speed/direction controls
Side-by-side foot pedals and cruise control lever
Side-by-side foot pedals control the speed and direction of travel:
Cruise control lever
Cruise control is available on the E120, E130, E150, E160, E170, and E180:
Mower deck height-adjustment lever
A spring-assisted, low-effort lift lever simplifies setting and adjusting the mower cut height:
Parking brake lever
Brake/parking pedal
The parking brake control is conveniently located for easy access. It holds the brake pedal securely in the locked position.
PTO engagement lever
The mower deck is engaged with an easy-to-see and easy-to-use yellow lever on the dashboard. Its placement on the right side leaves a lot of room on the left, the entry side of the tractor, for the operator to get on and off the tractor.
RIO switch
CAUTION: Children or bystanders may be injured by rotating blades. Before traveling forward or rearward:
NOTE: Backing up while the mower is engaged is strongly discouraged. RIO should be used only when operating another attachment or when the operator deems it necessary to reposition the machine with the mower engaged.
NOTE: If the engine and mower or other attachment stops while repositioning the machine, return the attachment engagement lever/switch to the off position. Start the engine and engage mower or other attachment. Begin again with step 2.
One-piece hood is easy to open
Service interval decal located under hood
The one-piece hood opens easily to permit checking and servicing the engine:
Easy-to-service engine fuel and oil filters
Seat tilted up for easy access to fuel-fill opening
The engine fuel and oil filters, the oil check/fill tube, and the oil drain tube are exposed for serviceability when the hood is opened.
The seat tilts up and out of the way to make adding fuel easy.
The 100 Series Tractors are covered by a 2-year/120-hour bumper-to-bumper warranty*:
*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.
One-piece hood opens for service access
Quality headlights for good visibility
The hood is made of molded-in color material:
MowerPlus app screen
MowerPlus app maintenance screen
Keep a John Deere riding lawn mower running its best and know how it mows with the John Deere MowerPlus app. Simply scan the lawn tractor’s barcode to get custom information. The app helps determine the best time to mow, communicates expert pre-mow tips, offers maintenance reminders, and provides walk-through guides.
Look for the MowerPlus app on the iOS® or Android™ system app stores.
The app supports residential lawn equipment such as 100 Series, S240, X300, X500, X700, Z200 through Z600, and many similarly-sized older products. It does not presently support tractor models numbered 1000 and larger, such as 1025R.
NOTE: Some product image variation may exist.
MowerPlus hour meter connector packaging
The John Deere MowerPlus hour meter connector wirelessly links a 100 Series or S240 Lawn Tractor to the MowerPlus app on a mobile device. The hour meter connector transmits engine usage to the app, making it easy to track maintenance intervals:
iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc. Android is a trademark of Google LLC.
Mowing with 42-in. (107-cm) mower deck
42-in. (107-cm) mower deck
The Edge cutting system has been trademarked to emphasize the advantages of the John Deere mower deck designs. They give the mower superior convenience, performance, and reliability.
The 42-in. (107-cm) two-spindle, three-in-one mower is constructed of 13-gauge, 0.090-in. (2.3-mm) steel for long life:
Mower wash port
Mower wash port with hose connector
A wash port is provided to make cleaning the underside of the mower deck easy:
StarLock blade design
The StarLock blade design keeps the blade bolt at the correct torque for easy removal.
Optional blades for difficult mulching or bagging conditions are available.
Mower deck height adjustment lever
A spring-assisted, low-effort, ergonomically designed lift lever simplifies setting and adjusting the mower cut height:
Specs & Compare |
||||
|---|---|---|---|---|
| Select up to 4 models to compare specifications | John Deere E110 Lawn Tractor |
| Engine power | 19 hp 14.2 kW |
|||
|---|---|---|---|---|
| Engine manufacturer/model | 33R877 (M33) | |||
| Transaxle type | Hydrostatic, 2-wheel drive | |||
| Transaxle control | Two-pedal foot-controlled hydrostatic | |||
| Rear tires | 20x8-8 | |||
| Steering type | Sector and pinion with single drag link and tie rod | |||
| Lift system type | Lever on fender deck | |||
| Cutting width | Edge™ mower deck, 42 in. 107 |
|||
| U.S. warranty | 2 year/120 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
| Power | 19 hp 14.2 kW |
|||
|---|---|---|---|---|
| Displacement | 33 cu in. 540 cc |
|||
| Manufacturer/model | 33R877 (M33) | |||
| Type | Overhead valve, full-pressure lube, oil filter | |||
| Cylinders | One | |||
| Governor | Mechanical | |||
| Choke/speed control | One lever | |||
| Cooling method | Air | |||
| Air cleaner | Cartridge | |||
| Oil drain | No tools |
| Type | Gasoline | |||
|---|---|---|---|---|
| Fuel delivery | Pulse pump and carburetor | |||
| Fuel gauge | Mechanical, viewable from seat | |||
| Fuel tank location | Rear | |||
| Fuel fill opening | Center, 1.75 in. 4.45 cm |
|||
| Fuel tank capacity | 2.4 U.S. gal. 9.1 L |
| Battery | 12 V 300 CCA |
|||
|---|---|---|---|---|
| Charging system | Regulated, 9 amp | |||
| Engine starter | Bendix type | |||
| Hourmeter | Yes, with service reminder | |||
| Headlights | Two standard, incandescent | |||
| Taillights or reflector | No | |||
| Backup lights | No | |||
| Rear work lights | No | |||
| 12-V outlet | No |
| Type | Hydrostatic, 2-wheel drive | |||
|---|---|---|---|---|
| Control | Two-pedal foot-controlled hydrostatic | |||
| Cruise control | No | |||
| Oil cooler | Fins and fan on transaxle | |||
| Oil filter | Yes, not serviceable | |||
| Differential lock | No | |||
| Forward speed | 0-5.5 mph 0-8.9 km/h |
|||
| Reverse speed | 0-3.2 mph 0-5.1 km/h |
|||
| Brakes | Internal wet disk |
| Frame | Full-length welded steel | |||
|---|---|---|---|---|
| Primer/paint | E-coat/powder | |||
| Weight bracket | Optional rear | |||
| Receiver hitch | No | |||
| Front axle | Cast-iron front axle, powdered-metal front wheel bushings | |||
| Spindle bushings | No | |||
| Front tires | 15x6-6 | |||
| Rear tires | 20x8-8 | |||
| Hood material | Molded-in color material reduces sound, will not rust or dent | |||
| Fender deck material | Stamped steel | |||
| Floor mats | Yes, with debris removing channels | |||
| Storage | Storage tray with optional cover | |||
| Service interval decal | Yes | |||
| Fender handles/grips | No | |||
| Cup holder | Yes | |||
| Equipment mounting | CargO Mount™ system |
| Type | Sector and pinion with single drag link and tie rod | |||
|---|---|---|---|---|
| Four-wheel steer | Not available on this model | |||
| Steering wheel | Standard, diameter - 12 in. 30.5 cm |
|||
| Tilt steering wheel | No | |||
| Turning radius | 18 in. 45.7 cm |
|||
| Uncut circle radius | 25 in. 63.5 cm |
| Type | One piece | |||
|---|---|---|---|---|
| Seat back height | 11 in. 27.9 cm |
|||
| Armrests | No | |||
| Fore-aft adjustment | While seated, 5.5 in. 14 cm |
|||
| Seat suspension | Tilt, two coil springs |
| Type | Lever on fender deck | |||
|---|---|---|---|---|
| Hydraulic outlets | No | |||
| Mower cut height | 13 positions, 1-4 in. 2.5-10.2 cm |
|||
| Cut height increments | 0.25 in. 0.64 cm |
|||
| Preset cut height | No |
| Type | Side discharge | |||
|---|---|---|---|---|
| Cutting width | Edge™ mower deck, 42 in. 107 cm |
|||
| Construction | Stamped steel deck shell | |||
| Mower deck material | Steel, 13 gauge 0.09 in. 2.3 mm |
|||
| Mower wash port | Yes | |||
| Mower drive system | Manual power take-off (PTO) | |||
| Mower wheels | Two | |||
| Mower wheel adjustment | One bolt | |||
| Mower level adjustment | Easy-level deck |
| Type | Slide under tractor | |||
|---|---|---|---|---|
| Front draft arms | One spring clip | |||
| Rear draft arms | Two spring clips | |||
| Mower wheels rotate | No | |||
| Drive system | Single belt |
| Meets ANSI standard | Yes | |||
|---|---|---|---|---|
| Meets OPEI standard | Yes | |||
| Backup protection | Reverse Implement Option (RIO) | |||
| Safety video | Yes |
| Notes | Molded-in color material reduces sound, will not rust or dent Durable primer and powder paint finish Full-length welded steel frame |
|||
|---|---|---|---|---|
| Warranty | 2 year/120 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
| Mowers | Standard, 42 in. 107 cm |
|||
|---|---|---|---|---|
| Rear bagger | 2-bag, 6.5 bu 229 L |
|||
| Powered material collection | ||||
| Mulching system | Mulch cover or high-performing plug | |||
| Front thatcher | ||||
| Front blade | 46 in. 116.8 cm |
|||
| Mid-mount blade | ||||
| Snow blower | Two-stage, 44 in. 111.8 cm |
|||
| Rotary broom | ||||
| Rotary tiller | ||||
| Sleeve hitch | ||||
| 3-point hitch | ||||
| Rear power take-off (PTO) | ||||
| Plow, moldboard | ||||
| Box scraper | ||||
| Cultivator | ||||
| Rear blade | ||||
| Disk harrow | ||||
| Landscape rake | ||||
| Sprayer | Tow-behind, 15 U.S. gal. 56.8 L Mounted, 15 U.S. gal. Tow-behind only, 25 U.S. gal. 94.6 L |
|||
| Spreader | Tow-behind only, 125-175 lb 57.7-80 kg |
|||
| Front bumper | Two-bar styled front bumper | |||
| Brush guard | ||||
| Weather protection | Snow cab | |||
| Sun canopy | Yes | |||
| Rear receiver hitch | ||||
| Bucket holder | Yes, single bucket | |||
| Grass striping | Lawn striping kit | |||
| Tractor shovel | ||||
| Front loader | ||||
| Other equipment | ||||
| Tow-behind tools | 16 |
| Height | 40.2 in. 102 cm |
|||
|---|---|---|---|---|
| Overall length | 69.7 in. 177 cm |
|||
| Wheelbase | 48.9 in. 124.2 cm |
|||
| Width with mower | 55.2 in. 140.2 cm |
|||
| Width with mower (deflector raised for storage) | 46.5 in. 118.1 cm |
|||
| Width without mower | ||||
| Weight | Mower, no fuel, 436 lb 198 kg |
| Date collected | 30-Sept-2019 |
|---|
