TruSet™ Tillage Technology

Truset Image

Fully integrated TruSet™ Tillage technology helps you increase your productivity in short tillage windows by making on-the-go depth and down-pressure adjustments from the cab – in only six seconds. Cover more acres in a day because you spend more time tilling and less time manually adjusting your implement for changing conditions from one field to the next. Do a better quality tillage job because it’s easy to fine tune the implement with 1/10th of an inch adjustments all from the cab with the touch of a button. And, the TruSet system gives you the ability to execute prescriptions and document the tillage operation. Run variable-depth tillage prescriptions to incorporate residue at different levels across the field or change the depth of tillage for different conditions such as lighter soils or areas of known compaction. Document your tillage passes to see if different tillage strategies affected crop emergence or yield.

The TruSet Tillage system can be ordered with the implement from the factory or through parts as an aftermarket attachment kit. TruSet is available on all model years of the following implements:

TruSet is compatible with John Deere and competitive tractors. Depending on the tractor, a compatibility kit may be needed in addition to the TruSet Tillage system. The following chart identifies the components needed to operate TruSet on a 2230LL or 2230FH Field Cultivator with a GreenStar-ready tractor.

TruSet ProductJohn Deere 30 Series and Newer TractorsJohn Deere 20 Series Tractors ( large frame or IVT™ system)John Deere 20 Series Tractors (small frame or non-IVT)John Deere 10 Series and older TractorsCompetitive tractors

TruSet Tillage system

Yes

Yes

Yes

Yes

Yes

TruSet

No

No

Yes

Yes

Yes

Both the TruSet Tillage system and the compatibility kit will be available as a field-installed option that can be ordered with the field cultivator or through aftermarket parts.

TruSet™ Tillage compatibility requirements

TruSet Tillage requires a GreenStar-ready tractor with a supported display and receiver. The TruSet Tillage system must have a connection to the tractor ISO connection. Additional TruSet Tillage information:

Display CompatibilityTruSet FeatureIn-cab ControlCoverage MapDocumentationPrescription

SDUA

GS3

Yes

No

No

No

2630

GS3

Yes

Yes

Yes

Yes

4100

Gen 4

Yes

Yes

No

No

4600

Gen 4

Yes

Yes

Not yet

Not yet

TruSet can be run on John Deere and competitive tractors. For older John Deere and competitive tractors, a compatibility kit is needed in addition to the TruSet Tillage system. The compatibility kit includes an add-on selective control valve (SCV) and installation components.

Tractor CompatibilityMulti-depth OperationAdditional Display Required

9R Interim Tier 4 and Final Tier 4 (IT4 and FT4)

TruSet ready

No

8R (IT4 and FT4)

TruSet ready

No

7R (IT4 and FT4)

TruSet ready

No

9x30, 8x30

TruSet ready

Yes

9x20, 9x00 *

Compatibility kit

Yes

8x20, 8x10, 8x00 *

Compatibility kit

Yes

7x20, 7x30 (IVT™ transmission and large frame only)

TruSet ready

Yes

7x20, 7x30 (small frame or non IVT)

Compatibility kit

Yes

6R (FT4)*

TruSet ready

No

6R (IT4)

Compatibility kit

No

Competitive tractors (GreenStar ready)

Compatibility kit

Yes

Unlisted John Deere tractors (GreenStar ready)

Compatibility kit

Yes

*Older models may require software update (and/or hardware).

Dealer Locator Image

Find Your Local Dealer

Check out the equipment that works best for you at your local dealer.