S240 SportTracteur de pelouse avec corps de 122 cm (48 po)

Moteur de 13,8 kW (18,5 hp)

Filtres à huile moteur et à carburant

Le tracteur S240 Sport est équipé d’un moteur haut de gamme, le même qui est utilisé dans certains modèles de la série Select™ X300 :

• Les grands orifices de nettoyage intégrés à l’enveloppe du moteur se trouvent sur les culasses pour permettre l’inspection et la dépose faciles de débris qui auraient pu s’y accumuler.
• Les systèmes haut de gamme de filtrage de l’huile moteur et de l’air et la conception du système de refroidissement offrent une fiabilité et une durée d’utilisation accrues du moteur.

Le moteur à deux cylindres en V de 13,8 kW (18,5 hp) développe suffisamment de puissance et de couple pour faire face aux conditions de hachage, de tonte et d’ensachage les plus difficiles :

• Configuration à deux cylindres en V développant un couple supérieur tout en produisant moins de vibrations et de bruit
• L’allumage électronique permet des démarrages rapides
• Chemises de cylindre en fonte pour une durée d’utilisation prolongée du moteur
• Les soupapes en tête procurent une puissance exceptionnelle et réduisent la consommation de carburant
• Grâce au système de lubrification sous pression intégral et au filtre à huile efficace, le moteur est plus durable et les changements d’huile sont moins fréquents
  • Efficacité accrue sur les terrains en pente
• Filtre à carburant en ligne offrant une fiabilité accrue

Levier de commande du régime du moteur et levier de l’étrangleur à ressort

Capot ouvert

Le levier de commande du régime du moteur et le levier de commande de l’étrangleur sont deux commandes distinctes :

• Le levier de commande du régime du moteur est facile à utiliser. Il peut être manipulé sans crainte de le pousser trop et ainsi d’activer l’étrangleur par accident, comme c’est le cas sur les systèmes dotés d’un seul levier pour commander le régime du moteur et l’étrangleur.
• Le levier de commande de l’étrangleur est doté d’un ressort. Le conducteur ne risque donc pas conduire le tracteur en laissant par mégarde l’étrangleur activé.

La large ouverture du capot de moteur permet un accès aisé aux points d’entretien :

• cela de nettoyer et d’inspecter facilement le moteur.
• Tous les points d’entretien importants sont directement accessibles.
• Les orifices de nettoyage prévus dans l’enveloppe du moteur facilitent le nettoyage des ailettes de refroidissement du moteur.
• Le moteur de haute qualité utilisé dans le S240 ne nécessite pas de changement du filtre et de l’huile après 8 heures car les améliorations du point de vue du procédé de fabrication, de la qualité des pièces, des composants et des huiles sont telles qu’il n’est plus nécessaire de procéder à une première vidange selon un délai aussi court.

Tracteur S240

Châssis rigide, monobloc et essieu avant en fonte

Le style du tracteur S240 Sport a été amélioré et est maintenant caractérisé par un capot unique :

• Des panneaux de fermeture recouvrent maintenant la partie inférieure à l’arrière du capot, ce qui en améliore l’apparence et réduit le bruit en provenance du moteur.
• Des bouches d’aération sur le dessus du capot améliorent le refroidissement du moteur.

Le châssis monobloc solide est fabriqué en acier de calibre 12 et d’une épaisseur de 2,7 mm (0,105 po) :

• Le châssis en acier pleine longueur soudé par un système robotisé est doté de longerons en acier à haute résistance offrant une solidité et une durabilité accrues.
• Les ailes monobloc sont boulonnées au châssis.
• Le pare-chocs avant à deux barres est inclus en équipement de série pour ajouter du style et de la protection.

Tracteur S240

Pneu avec bande de roulement pour gazon

Le S240 est doté de pneus pour gazon offrant une traction et une apparence supérieures :

• Les pneus à profil arrondi réduisent les risques de dommage sur le gazon et l’effort de direction nécessaire.

Essieu avant en fonte qui ne se déforme pas

Essieu avant et fusée des roues

L’essieu avant, en fonte rigide, ne se déforme pas :

• Un système de direction robuste à crémaillère et à secteur similaire à celui d’une voiture, avec bielle de direction simple et barre d’accouplement, permet d’effectuer des virages serrés sans effort.
• Les graisseurs permettent une lubrification régulière, ce qui rend la direction plus souple et offre une protection accrue contre l’usure.
• Les grandes fusées de roues de 19 mm (0,75 po) de diamètre assurent une excellente durabilité.
  • Les roues avant sont dotées de roulements à billes, ce qui leur procure une fiabilité et une durée d’utilisation accrues par rapport aux autres tracteurs de pelouse dont les roues avant sont équipées de bagues.

Deux pédales de commande et un levier du régulateur de vitesse

Pédale de commande hydrostatique/automatique en utilisation

Une transmission hydrostatique automatique Kanzaki® Tuff Torq® offre un choix infini de vitesses et facilite les changements du sens de déplacement.

Les pédales côte à côte permettent de contrôler la vitesse et le sens de déplacement :

• L’accélérateur ressemblant à celui d’une voiture permet une utilisation aisée.
• Le conducteur peut changer de direction sans lever le pied.
• La grande surface des pédales assure au conducteur un confort accru.

Transmission hydrostatique automatique

Chaque modèle est équipé de la transmission appropriée, en fonction de la taille des pneus arrière et des exigences de rendement du tracteur afin d’assurer une performance et une fiabilité supérieures :

• Le tracteur S240 Sport est équipé d’une boîte-pont Tuff Torq K46DP avec freins à disques humides internes offrant une fiabilité et une durée d’utilisation accrues :
  • Offre un couple nominal de 30 pour cent supérieur à celui de la boîte-pont dont sont dotés de nombreux tracteurs de pelouse
  • Nécessite l’utilisation de l’huile Hy-Gard™ comme les tracteurs de la série Select™ X300

Régulateur de vitesse de série

Levier du régulateur de vitesse

Un régulateur de vitesse facile à utiliser en option maintient la vitesse du tracteur pour la tonte de grandes surfaces.

• Pour l’actionner, il suffit de soulever le levier du régulateur de vitesse jusqu’à ce que le pied soit retiré de la pédale de marche avant.
• Pour le désactiver, il suffit d’appuyer légèrement sur la pédale de marche avant, puis de la relâcher.
• Pour les arrêts d’urgence, il est possible de désactiver le régulateur de vitesse en appuyant sur la pédale de frein ou en abaissant le levier du régulateur de vitesse.

Kanzaki et Tuff Torq sont des marques déposées de Kanzaki Kokyukoki Manufacturing Company.

Poste de conduite confortable, côté droit

Poste de conduite confortable, côté gauche

Le volant de direction à trois rayons procure au conducteur un confort et un contrôle accrus :

• Le grand volant de direction 35,6 cm (14 po) de diamètre offre un confort et un contrôle accrus comparativement aux volants de petit diamètre qui sont utilisés sur plusieurs tracteurs de pelouse.

Le commutateur d’allumage est situé sur le tableau de bord, ce qui facilite le démarrage.

De grands repose-pieds recouverts de caoutchouc antidérapant et antivibrations assurent le confort et la sécurité du conducteur.

Commandes et instruments

Le tableau de bord profilé a une apparence soignée et attrayante :

• Les commandes sont codées par couleur et identifiées au moyen de termes anglais, ce qui permet au conducteur de les repérer facilement.
• Les commandes sont placées de manière logique et elles sont facilement accessibles.
• Le compteur d’heures permet de déterminer facilement à quel moment les vidanges d’huile et les autres travaux d’entretien doivent être effectués.
• Grâce à leur conception fonctionnelle, les commandes ont une belle apparence et donnent une impression de confort.

Levier de commande du régime du moteur et levier de l’étrangleur à ressort

Interrupteur de prise de force (PDF)

Le levier de commande du régime du moteur et le levier de commande de l’étrangleur sont deux commandes distinctes :

• Le levier de commande du régime du moteur est facile à utiliser. Il peut être manipulé sans crainte de le pousser trop et ainsi d’activer l’étrangleur par accident, comme c’est le cas sur les systèmes dotés d’un seul levier pour commander le régime du moteur et l’étrangleur.
• Le levier de commande de l’étrangleur est doté d’un ressort. Le conducteur ne risque donc pas conduire le tracteur en laissant par mégarde l’étrangleur activé.

Le système d’entraînement de la tondeuse est commandé par un interrupteur de PDF électrique facile à utiliser :

• Les interrupteurs électriques ne nécessitent qu’un petit mouvement comparativement au mouvement de grande amplitude que requiert un levier d’embrayage manuel de la PDF.
• Grâce à l’embrayage électrique de la PDF, la courroie d’entraînement de la tondeuse demeure tendue en tout temps, ce qui en améliore la fiabilité, comparativement à un embrayage manuel de PDF.

Régulateur de vitesse

Levier du régulateur de vitesse

Levier du régulateur de vitesse et deux pédales de commande

Régulateur de vitesse de série :

• Pour l’actionner, il suffit de soulever le levier du régulateur de vitesse jusqu’à ce que le pied soit retiré de la pédale de marche avant.
• S’il est nécessaire d’effectuer un arrêt d’urgence, il est possible de désactiver le régulateur de vitesse en appuyant sur la pédale de frein ou la pédale de marche avant.

Commande de frein de stationnement

Commande de frein de stationnement

Brake pedal and parking brake control

La commande de frein de stationnement est facilement accessible. Elle maintient fermement la pédale de frein en position verrouillée.

Réglage de la hauteur du corps de tondeuse et poignée

Levier de réglage de la hauteur du corps de tondeuse

Élargisseur d’aile avec poignée

Le levier à ressort facile à manœuvrer simplifie le réglage de la hauteur de coupe de la tondeuse :

• Des incréments de 0,64 cm (0,25 po) permettent d’ajuster la hauteur de coupe avec précision.

Les larges élargisseurs d’aile comportent des poignées et des réflecteurs pour une sécurité accrue.

Siège confortable

Siège à dossier ajouré

Siège facilement réglable

Le conducteur peut facilement avancer ou reculer son siège tout en étant assis ; le siège peut être déplacé de 140 mm (5,5 po) et offre 10 positions différentes :

• Le siège à dossier ajouré permet d’aérer le dos du conducteur.
• Le levier en plastique vert de réglage du siège est facile à repérer et à utiliser.
• Les patins sous le siège permettent de le faire glisser aisément, ce qui en facilite le réglage.

Les isolateurs en caoutchouc sous le siège assurent une conduite en douceur

Le siège peut être incliné vers l’avant pour le mettre à l’abri des intempéries ou pour avoir accès facilement au réservoir de carburant :

• Les isolateurs en caoutchouc sous le siège assurent une conduite en douceur et le confort du conducteur.

Remise facile et autocollant d’intervalle d’entretien pratique

Storage compartment with cover

Autocollant d’intervalle d’entretien pratique

Un porte-gobelet et un compartiment de rangement pratiques, sur l’aile droite, procurent au conducteur une valeur ajoutée.

L’autocollant qui se trouve à l’intérieur du capot permet de prendre rapidement connaissance des renseignements d’entretien de base.

Jauge du réservoir de carburant

Orifice de remplissage du réservoir de carburant pratique

La jauge du réservoir de carburant indique le niveau de carburant et est visible depuis le siège du conducteur :

• Niveau de carburant facile à vérifier
• Emplacement pratique

Réservoir de carburant :

• La contenance du réservoir est de 9,08 l (2,4 gallons US).
• L’orifice de remplissage du réservoir de carburant est facile d’accès, sous le siège.
  • Le réservoir est facile à remplir sans risque de déversement.
  • Le bouchon du réservoir est muni d’une attache pour plus de commodité.
  • Le bouchon de réservoir étanche aide à garder les vapeurs à l’intérieur du réservoir.

Capot en JD Loy résistant aux rayons ultraviolets

Phares de qualité offrant une bonne visibilité

Le capot est fait de polymère JD Loy coulé par injection et résistant aux rayons ultraviolets :

• Le polymère JD Loy est robuste et durable.
  • À l’épreuve des bosses et de la rouille
• Comme la couleur est intégrée au matériau, le capot conserve longtemps sa belle apparence.
• Parce qu’il est à l’épreuve des rayons ultraviolets, le polymère JD Loy résiste à la décoloration.
• Des ouvertures sur le côté du capot laissent entrer amplement d’air pour refroidir le moteur tout en maintenant un faible niveau de bruit.
• Deux phares offrent un bon éclairage pour les travaux à l’obscurité.

Bouton de la commande d’instrument en marche arrière

Interrupteur de prise de force (PDF)

Utilisation de l’option de commande d’instrument en marche arrière

ATTENTION : Les lames rotatives peuvent blesser les enfants et toute autre personne se trouvant à proximité. Avant de se déplacer en marche avant ou en marche arrière, procéder comme suit :

• Inspecter soigneusement la zone de travail.
• Désengager la tondeuse avant de reculer.

REMARQUE : Il est fortement déconseillé de reculer avec la tondeuse enclenchée. Utiliser l’option RIO uniquement avec un équipement autre que la tondeuse ou lorsque l’utilisateur juge qu’il a besoin de repositionner la machine alors que la tondeuse est engagée.

1. Arrêter le déplacement en marche avant.
2. Regarder derrière la machine pour vérifier qu’il n’y a personne.
3. Appuyer sur le contacteur de l’option d’instrument en marche arrière tout en appuyant légèrement sur la pédale de marche arrière.

REMARQUE : Si la tondeuse ou l’équipement s’arrête au cours du repositionnement de la machine, remettre le contacteur d’enclenchement de l’équipement sur la position d’arrêt. Mettre le moteur en marche et enclencher la tondeuse. Recommencer à partir de l’étape 2.

4. Relâcher le contacteur de l’option d’instrument en marche arrière et repositionner la machine lorsqu’elle commence à reculer.
5. Reprendre le déplacement en marche avant. La tondeuse ou l’équipement doit continuer à fonctionner.
6. Répéter la procédure pour positionner à nouveau la machine.

Système CargO Mount arrière

Système CargO Mount avant

Le sac récupérateur d’herbe arrière est installé au moyen du système CargO Mount arrière

Le système CargO Mount est un ensemble de points de fixation placés à l’avant et à l’arrière facilitant l’installation d’un sac récupérateur d’herbe arrière et d’autres accessoires.

Le capot monobloc est facile à ouvrir

Autocollant d’intervalle d’entretien sous le capot

Le capot monobloc s’ouvre facilement pour permettre la vérification et l’entretien du moteur :

• Tous les points d’entretien importants sont facilement accessibles.
• Un autocollant d’intervalle d’entretien est apposé à l’intérieur du capot du tracteur, ce qui est utile pour savoir à quel moment effectuer les travaux d’entretien sur le tracteur.
  • Le moteur de haute qualité utilisé dans le S240 ne nécessite pas de changement du filtre et de l’huile après 8 heures car les améliorations du point de vue du procédé de fabrication, de la qualité des pièces, des composants et des huiles sont telles qu’il n’est plus nécessaire de procéder à une première vidange selon un délai aussi court.

Filtres à huile moteur et à carburant faciles d’entretien

Accès facile à l’orifice de remplissage du réservoir à carburant

Les filtres à essence et à l’huile, la jauge d’huile, l’orifice de remplissage du carter d’huile et le tube de vidange d’huile sont situés de manière à faciliter l’entretien lorsque le capot est ouvert.

Le siège se relève, ce qui facilite le remplissage du réservoir à carburant.

Le tracteur S240 Sport est couvert par une garantie complète de trois ans ou 200 heures* :

• Les caractéristiques haut de gamme des tracteurs S240 permettent d’offrir cette garantie plus complète et de plus longue durée que celle des autres tracteurs de taille comparable.

* La durée est limitée par le nombre d’années ou le nombre d’heures d’utilisation, selon la première éventualité, et varie selon le modèle. Pour plus de détails, consultez la GARANTIE LIMITÉE POUR LES ÉQUIPEMENTS UTILITAIRES ET D’ENTRETIEN DES GAZONS JOHN DEERE NEUFS sur le site JohnDeere.com ou JohnDeere.ca/TUWarranty.

Tracteur S240 avec tondeuse Accel Deep 48A

Tondeuse Accel Deep 48A

Le corps de tondeuse Accel Deep de 122 cm (48 po) en acier embouti, doté d’une coque profonde et d’un dessus plat, qui offre une coupe d’excellente qualité et une productivité remarquable, est facile à nettoyer, durable et polyvalent. Il fournit un rendement optimal et assure une excellente dispersion des brins d’herbe coupée, même à grande vitesse :

• La profondeur de 12,3 cm (4,83 po) sur l’ensemble de la coque assure un rendement optimal lors de la tonte, du hachage et de l’ensachage.
  • L’accessoire MulchControl™ offert en option est polyvalent et assure un rendement de hachage supérieur.
• Comme le corps est fait en acier embouti, il ne présente aucune arête vive et aucun coin où l’herbe pourrait s’accumuler et réduire le rendement de la tonte.
• Le corps de tondeuse est suspendu, ce qui assure une coupe uniforme et de niveau.
  • Les roues de la tondeuse sont réglables et sont situées juste au-dessus du sol, ce qui réduit les dommages au gazon.

Excellente qualité de coupe

Tondeuse 48A vue du dessus

Tondeuse 48A vue du dessous

Ce corps de tondeuse Accel Deep en acier embouti procure une coupe d’excellente qualité. Il offre suffisamment d’espace pour évacuer l’herbe coupée en suspension sans qu’elle soit coupée de nouveau :

• La puissance de la tondeuse sert à couper l’herbe une seule fois, ce qui améliore grandement sa capacité de coupe.
  • Cela permet de garder une excellente qualité de coupe à grande vitesse.
• Le débit constant des matières éjectées empêche l’herbe déjà coupée d’entrer en contact avec l’herbe à couper, permettant ainsi aux lames d’assurer une coupe nette.
• Même en mode de hachage, la coupe est plus uniforme que celle qu’offrent d’autres types de conception. En effet, la profondeur accrue du corps permet une circulation continue, une deuxième coupe optimale et une distribution uniforme des brins d’herbe coupée.

Productivité – accélère le travail

Côté gauche du corps de tondeuse Accel Deep 48A

Côté droit du corps de tondeuse Accel Deep 48A

Le corps de tondeuse Accel Deep en acier embouti permet d’accroître la productivité, et donc d’accélérer le travail. Il offre suffisamment d’espace pour évacuer rapidement l’herbe coupée en suspension sans la couper de nouveau, ce qui permet de concentrer la puissance de la tondeuse sur l’herbe à couper :

• Améliore grandement la capacité de la tondeuse à assurer un excellent rendement de tonte dans des conditions difficiles et à grande vitesse

La grande goulotte de décharge, à la fois haute et large, laisse passer un grand volume de matière :

• Elle assure une décharge uniforme des brins d’herbe coupée, quelle que soit la vitesse de tonte
• Elle réduit les risques d’obstruction, ce qui est particulièrement important durant la tonte de gazon épais, dense ou humide, ou durant l’ensachage

Déflecteur MulchControl fermé

Poignée de l’accessoire MulchControl

• La poignée de l’accessoire MulchControl se trouve sur le dessus du corps de tondeuse et sert à ouvrir et à fermer le déflecteur de décharge.
  • Le conducteur doit donc descendre de la tondeuse pour engager ou désengager le mode de hachage.
• Le passage du mode de hachage au mode de décharge latérale ou inversement ne prend que quelques secondes.

L’accessoire MulchControl convient aux situations suivantes :

• Lorsque le conducteur procède habituellement au hachage de l’herbe, mais qu’il veut passer au mode de décharge latérale si l’herbe est trop longue
• Lorsque le conducteur utilise habituellement la décharge latérale, mais qu’il souhaite pouvoir fermer la goulotte afin de réduire la quantité de brins d’herbe coupée
• Lorsque le conducteur procède toujours au hachage sur une pelouse principale, mais qu’il a souvent recours à la décharge latérale sur des pelouses secondaires
• Lorsqu’il procède à l’ensachage des brins d’herbe coupée, mais qu’il veut tondre le plus longtemps possible avant de devoir vider les sacs

L’accessoire MulchControl permet au conducteur de décider du traitement de l’herbe coupée. Désormais, le conducteur bénéficie de tous les avantages du hachage tout en ayant la possibilité de passer facilement à la décharge latérale ou à l’ensachage au besoin.

En mode de décharge latérale, l’accessoire MulchControl continue de hacher environ le tiers de l’herbe coupée. Par conséquent, il s’agit d’un mode de hachage partiel. Ce mode peut être avantageux durant la décharge latérale de l’herbe coupée ou l’ensachage, car il réduit le volume d’herbe rejetée. Néanmoins, il présente parfois des inconvénients dans les cas suivants :

• Lorsque l’herbe est coriace, comme le gazon de Manille et l’herbe des Bermudes dans le Sud des États-Unis
• Lorsque l’herbe est humide ou très longue, ce qui est fréquent dans la région du Pacifique nord-ouest des États-Unis
• Lorsqu’il est souhaitable de débarrasser le plus possible la pelouse des brins d’herbe coupée en optimisant l’ensachage

Propreté – à la fois pour la tondeuse et pour le conducteur

Corps de tondeuse Accel Deep 48A

Corps de tondeuse Accel Deep 48A

Grâce à son dessus plat, le corps de tondeuse en acier embouti demeure propre et permet au conducteur de ne pas se salir :

• Le corps de tondeuse ne présente que très peu d’endroits, sur le dessus ou en dessous, où l’herbe coupée peut s’accumuler.
  • La partie supérieure du corps demeure propre, ce qui réduit le temps et les efforts nécessaires au nettoyage et à l’entretien.
  • La partie inférieure du corps est auto-nettoyante, ce qui empêche l’accumulation de matières pouvant nuire à la circulation de l’air et des brins d’herbe coupée et lui assure un rendement optimal
  • Il n’est pas nécessaire de procéder aussi souvent au nettoyage et au retrait des matières accumulées sous le corps de la tondeuse.
• La profondeur du corps de la tondeuse Accel Deep réduit la quantité de brins d’herbe coupée qui s’échappe par l’avant de la tondeuse.
  • La quantité de brins d’herbe coupée qui aboutissent sur le conducteur et sur le corps de tondeuse est réduite.
  • Même en ce qui concerne les matières éjectées par la goulotte, les brins d’herbe étant plus longs, puisque coupés une seule fois, ils sont moins susceptibles d’aboutir sur le conducteur.
  • Le hachage empêche complètement la décharge de matières et l’accessoire MulchControl fait en sorte que le hachage constitue une solution pratique dans la plupart des situations de tonte.

Le nettoyage du corps de tondeuse, sur le dessus et en dessous, est l’une des activités d’entretien les plus fréquentes :

• Le dessus plat du corps de tondeuse offre peu d’endroits où les brins d’herbe coupée peuvent s’accumuler et facilite le retrait des matières qui réussissent malgré tout à s’y accumuler.

Orifice de nettoyage de la tondeuse

Orifice de nettoyage de la tondeuse avec raccord de tuyau souple

Un orifice de nettoyage facilite le nettoyage de la partie inférieure du corps de tondeuse.

• Un raccord de tuyau souple est offert de série avec le corps de tondeuse.

La durabilité supérieure est intégrée à la conception

Logement de fusée avec couvercle rabattable

Roue de tondeuse facile à régler et côté renforcé de la tondeuse

Le corps de tondeuse 48A est doté de logements robustes pour les moyeux de lames ; les lames demeurent donc alignées, même après des années d’utilisation intensive :

• Les nervures de la coque lui confèrent une robustesse accrue.

Les roues de la tondeuse sont renforcées :

• Cela leur procure une robustesse et une durabilité accrues ; elles peuvent donc être utilisées longtemps sans problème.
• Le réglage de la hauteur des roues pour obtenir la hauteur de coupe souhaitée est facile et rapide.

Grâce à la conception du système d’entraînement par courroie à faible tension, la charge latérale subie par les roulements inférieurs du moteur et les roulements du corps de tondeuse est plus faible, ce qui accroît la durée d’utilisation.

Le corps de tondeuse 48A est doté d’un pare-chocs fabriqué à partir d’une tige d’acier massif de 16 mm (5/8 po) de diamètre qui accroît sa robustesse et offre une meilleure protection.

Le procédé de peinture en deux étapes, dont un revêtement électrophorétique et une peinture en poudre, procure une protection supplémentaire contre la rouille.

Polyvalence – il est facile de passer du mode de décharge latérale aux modes de hachage et d’ensachage

La tondeuse 48A est conçue pour offrir une polyvalence optimale, en permettant de passer facilement d’un mode à un autre :

• Avec l’accessoire MulchControl, offert en option (en plus des lames de hachage spéciales), le passage du mode de décharge latérale au mode de hachage, et vice-versa, se fait simplement au moyen d’un levier.
• Le sac récupérateur d’herbe arrière Power Flow peut être utilisé lorsque l’accessoire MulchControl et les lames sont installés ; pour ce faire, il suffit de placer le levier de l’accessoire MulchControl en position de décharge latérale.

Option MulchControl

L’accessoire MulchControl conçu pour le corps de tondeuse 48A fait du hachage le mode de choix dans de nombreuses situations de tonte. En effet, non seulement il offre un excellent rendement en matière de hachage, mais il permet également de passer facilement au mode de décharge latérale ou d’ensachage, selon les besoins. Le hachage des brins d’herbe coupée présente notamment les avantages suivants :

• Il donne une pelouse magnifique
• Aucun brin d’herbe coupée projeté sur le conducteur, les allées ou les plates-bandes
• Il réduit la quantité d’engrais nécessaire
• L’élimination de l’effort nécessaire au ramassage des brins d’herbe coupée

Fonctionnement de l’accessoire MulchControl

Déflecteur MulchControl ouvert

Déflecteur MulchControl fermé

L’accessoire MulchControl, de conception simple et innovante, est facile à utiliser et à entretenir :

• L’accessoire MulchControl inclut des déflecteurs permettant de réguler la circulation des brins d’herbe coupée sous le corps de tondeuse.
  • Le déflecteur MulchControl ou le diviseur, entre les moyeux de lames gauches et du milieu fait environ la moitié du parcours. Sa hauteur est conçue pour équilibrer les modes de hachage et de décharge latérale.
  • Lorsque le déflecteur MulchControl est ouvert, le séparateur situé entre les moyeux central et de gauche fait passer une partie de la matière par l’orifice de décharge, en plus de la matière provenant des zones situées autour des moyeux central et de droite.
  • Lorsque le déflecteur MulchControl est fermé, l’herbe coupée reste sous le corps de tondeuse, puis est hachée et déposée sur le gazon.

Sac récupérateur d’herbe arrière Power Flow™ de 229 l (6,5 boisseaux) en option

Sac récupérateur d’herbe arrière offert en option

Souffleur Power Flow

Un système de récupération à sac récupérateur d’herbe arrière de 229 l (6,5 boisseaux) est disponible en option. Ce système permet de ramasser efficacement les brins d’herbe coupée et les feuilles :

• Le souffleur Power Flow et la goulotte sont faciles à installer. Le souffleur Power Flow pivote vers l’extérieur, ce qui facilite le vidage et le nettoyage.
• La conception de la trémie, de style moderne, offre un excellent rendement lors de l’ensachage, un fonctionnement plus propre et des sacs faciles à vider :
• Capacité de 229 l (6,5 boisseaux)
• Souffleur Power Flow facile à poser
• Goulotte facile à poser

7P Poly Utility Cart

Every owner of a John riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes.

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak™ or ZTrak™ mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck.

7P Utility Cart

• The cart has a premium molded, high-density polyethylene box construction.
• Compression molding process allows polyethyl­ene to be the optimum thickness in all areas for superior strength and durability.
• Polyethylene body will not rust or dent; it stays looking new longer.
• 0.75-in. (2-cm) x 2-in. (5-cm) stake pockets are molded in to make the addition of side extensions easy.
• Two vertical 0.75-in. (2-cm) molded channels on each side allow easy use of dividers to separate the box into two or three compartments.
• Ribs in the box bottom add strength and prevent the shovel from hitting bolts when emptying the cart.
• Sloped tailgate design makes emptying the box easier; there is no tailgate to loosen or remove.
• Styling is compatible with other John Deere equipment.
• Pneumatic tires provide turf tread for good flotation, shock absorption, and minimal rolling resistance.

Wheels

7P Utility Cart wheel

Wheels are mounted on a solid, one-piece axle for durability.
 
Iron and Oilite® wheel bearings with grease fittings provide lubrication for long life.

The pneumatic tires offer the following:

• Good flotation
• Minimal rolling resistance
• Shock absorption

Sloped tailgate

Sloped tailgate for easy emptying

A sloped tailgate design makes emptying the box easier; there is no tailgate to loosen or remove.

Tractor hitch

Spring-pin tractor hitch

A large-diameter hitch pin provides plenty of strength:

• Fast, easy attachment to the tractor hitch
• Spring pin to ensure the pin stays in place

Tilt latch

Tilt latch

An easy-to-use, spring-loaded dump latch allows tilting the box for easier unloading. A steep dump angle makes emptying the cart easier.

Model comparison chart

Comparison with similar models

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

Specifications

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

7P Poly Utility Cart
Order number: LP21935

Oilite is a trademark of Beemer Precision, Incorporated.

8Y Convertible Cart, push mode

8Y Convertible Cart, tow-behind mode

The 8-cu-ft (0.23-m³), 300-lb (136-kg) capacity 8Y Convertible Cart can be used to haul a variety of materials including lawn debris, sand, dirt, mulch, and plants. The unique convertible hitch allows changing the cart from tow-behind mode to push mode without tools.

Key features include:

• Compatible with riding lawn tractors and garden tractors
• Durable poly construction
• All-terrain pneumatic tires
• Converts from tow cart to push cart without tools
• Large handle is provided for ease of use

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes. Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.
 
NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. See the appropriate vehicle pages for the weight of the vehicle and the mower deck. 

Model comparison chart

Comparison with similar models

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

Specifications

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

8Y Convertible Cart
Order number: LP22755

Oilite is a trademark of Beemer Precision, Incorporated.

10P Utility Cart

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart.

Utility carts can be used to haul a variety of materials:

• Firewood
• Lawn debris
• Sand
• Dirt
• Mulch
• Garden tools
• Plants and bushes

The 10P Utility Cart is designed, painted, and decaled to be compatible with other John Deere equipment:

• Large 650-lb (295-kg) capacity
• 10-cu ft (283-L), heavy-duty, 0.25-in. (6.4-mm) thick poly bed
• Will not dent or rust
• 15x6 tubeless pneumatic tires with turf tread for maximum traction
• Easy, hands-free foot pedal dump release
• Steep dump angle for complete emptying

A convenient foot pedal dump release kit, LP48017, which now comes standard on all 10P and 17P carts is available to retrofit existing poly carts. This kit allows the operator to use both hands to lift the cart bed for more natural and efficient unloading.

Model comparison chart

Comparison with similar models

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

Specifications

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:

Ordering information
Please contact a local John Deere dealer for availability and pricing information.

10P Utility Cart
Order number: LPPCT10JD

Oilite is a trademark of Beemer Precision, Incorporated.

13 Steel Utility Cart

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials, including firewood, lawn debris, dirt, sand, mulch, garden tools, plants, and bushes.

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. See the appropriate vehicle pages for the weight of the vehicle and the mower deck.

Welded box

Welded box construction provides maximum reliability:

• Requires less setup time than the bolted construction.
• Box sides and bottom are one piece and have rounded corners and no hardware for easy cleaning.

Wheels and tires

Wheels are mounted on a solid, one-piece axle for durability.

Iron/Oilite® wheel bearings with grease fittings provide lubrication for long life.

Pneumatic tires offer:

• Good flotation
• Minimal rolling resistance
• Shock absorption

Turf-tread tires are used on the 13 Utility Cart.

Deluxe tailgate

Deluxe tailgate is hinged for easy emptying and can also be quickly removed without the use of tools.

Easy hookup and tilt-dump latch

Spring-pin tractor hitch

Tilt-dump latch

A large-diameter hitch pin provides plenty of strength:

• Fast, easy attachment to the tractor hitch
• Spring pin to ensure the pin stays in place

The easy-to-use latch allows tilting the bed for easier unloading:

• Steep dump angle makes emptying easier.

Model comparison chart

Comparison with similar models

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

Specifications

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

13 Utility Cart
Order number: LPHDC13JD

Oilite is a trademark of Beemer Precision, Incorporated.

16YS Swivel Cart

The 17-cu-ft (0.48-m³), 800-lb (363-kg) capacity or 350 lb (158 kg) when using swivel feature to dump 16YS Swivel Cart is unique in the lineup of John Deere carts in that it can be swiveled 120 degrees to either side for easier unloading. The operator can simply pull up next to where they want to dump the material and swivel the cart, eliminating the need to back up the cart.

Key features include:

• Haul a variety of materials including lawn debris, sand, dirt, mulch, and plants
• 800-lb (363-kg) capacity makes it durable enough for the heavy jobs
  • 350 lb (158 kg) when using swivel feature to dump
• Convenient foot pedal release for easy dumping
• Molded stake pockets for enlarging the bed size

NOTE: Do not exceed 350 lb (158 kg) weight capacity when using swivel feature to dump.

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes. Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. See the appropriate vehicle pages for the weight of the vehicle and the mower deck.

Model comparison chart

Comparison with similar models

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

Specifications

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

16YS Convertible Cart

Order number: LP68186

Oilite is a trademark of Beemer Precision Incorporated.

17P Utility Cart

Every owner of a John Deere riding lawn and garden product is a potential user of a high-quality, affordable utility cart.

Utility carts can be used to haul a variety of materials:

• Firewood
• Lawn debris
• Sand
• Dirt
• Mulch
• Garden tools
• Plants and bushes

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

Key features of the 17P Utility Cart:

• 1,000-lb (454-kg), 17-cu ft (0.48-m³) load capacity.
• Cart has premium molded high-density polyethylene box construction.
• Compression molding process allows polyethyl­ene to be the optimum thickness in all areas for superior strength and durability.
• Polyethylene body will not rust or dent, staying new-looking longer.
• 0.75- x 2-in. (19- x 51-mm) stake pockets are molded in to make addition of side extensions easy.
• Two vertical 0.75-in. (19-mm) molded channels on each side allow for easy use of dividers to separate the box into two or three compartments.
• Ribs in box bottom add strength and prevent a shovel from hitting bolts when emptying the cart.
• Sloped tailgate design makes emptying the box easier; no tailgate to loosen or remove.
• Styling is compatible with other John Deere equipment.
• 16x6.5 pneumatic tires with turf tread give good flotation, shock absorption, and minimal rolling resistance.
• Wheels are mounted on a solid one-piece axle.
• Wheels turn on iron/Oilite® bushings with grease fitting for long life.
• Spring-loaded dump latch is easy to use.

A convenient foot pedal dump release kit, LP48017, which now comes standard on all 10P and 17P carts is available to retrofit existing poly carts. This kit allows the operator to use both hands to lift the cart bed for more natural and efficient unloading.

Model comparison chart

Comparison with similar models

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

Specifications

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

17P Utility Cart
Order number: LPPCT17JD

Oilite is a trademark of Beemer Precision Incorporated.

6.5-bu (229-L) hopper

Power Flow blower

The BUC10126 6.5-bu (229-L) Power Flow grass collection system includes the hopper, chute, and blower. Mower blades are not included, as the bagger works well with either the standard side-discharge blades or mulching blades and the MulchControl™ system. It expands versatility of an S240 Tractor equipped with a 48-in. (122-cm) Accel Deep™ Mower Deck.

NOTE: Front ballast for the tractor is recommended, especially when operating on hills or inclines.

The blower, chute, and fan are molded from high impact polymer:

• Power Flow is lightweight for easy handling and minimal effect on mowing smoothness.
• It will not rust or corrode.
• Fan and housing resist wear and abrasion caused by sand.
• Contoured design gives a clean appearance and smooth grass flow.
• Fan is driven with V-belt from a sheave added to the top right mower spindle.

The chute includes a convenient handle and a fill indicator that tells the operator when the bags are full.

Specifications

*Ultra-high molecular weight.

Dump from the seat capability for 100 Series Tractors with a 6.5-bu material collection system (MCS)

MCS 6

The MCS 6 attachment is designed to provide dump from the seat grass collection/expulsion for John Deere 100 Series and S240 Sport Tractors equipped with the 2-bag material collection system (MCS). The MCS attachment eliminates the need to get off of the tractor and empty the bags. As a result, it will increase both efficiency and cleanliness in the mowing process.

The aluminum body is lightweight and easy to handle. Conveniently located hand lever and smooth release and latching system are easily accessed from the tractor seat. Because it is engineered specifically for the John Deere Material Collection System, installation is a breeze with simple hand tools.

Features:

• Lightweight aluminum construction
• Designed for full material expulsion
• Easy access self-latching spring tripped handle
• Ships almost fully assembled (5 minute handle assembly)
• Installs in seconds (after initial assembly)

Benefits:

• Easy - Convenient Access to dump handle directly from seat 
• Clean - No material handling, no mess 
• Efficient - Unload and go without leaving the seat 

NOTE: Fits John Deere 100 Series and S240 Sport Tractor 2-bag material collection systems. Not compatible with EZtrak™ Zero-Turn Mowers.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

MCS 6 attachment
Order number: LP47167

12-V outlet

The 12-V outlet kit can be installed on the tractor to provide power for various 12-V equipment.

Battery charger

This fully automatic 1.5-amp battery charger and maintainer safely charges lawn and garden, RV, deep-cycle, and most batteries that require long storage periods. It is particularly useful during winter months when the vehicle is not being used regularly, to ensure the battery stays charged:

• Automatically determines if the battery is 6- or 12-V and adjusts accordingly
• Helps maintain battery in good condition and ensures it is fully charged
• Powers on to charge battery and powers off when fully charged
• 'Onboard' feature allows mounting next to the battery on collector, street rods, and other occasional-use vehicles
• 1.5-amp trickle charges small batteries in 2 to 12 hours
• Maintains large battery charges
• Hookup protection guards battery and charger from damage 

Includes a choice of battery connection methods:

• Standard color-coded clips to connect to any battery
• Cable with quick-disconnect plug and end loops that can be bolted to battery terminals and easily unplugged from charger when not in use

Bucket holder (single)

Transporting mulch, plants, or debris is easier with the CargO Mount™ single bucket holder. Just slip the holder bracket into the tractor's rear CargO Mounts. For use with any standard 5-gal. (19-L) or 6-gal. (23-L) bucket, the bucket holder is designed to carry up to 70 lb (32 kg) of material.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Bucket holder (single)
Order number: LPJD100

Bucket holder (single)

Transporting mulch, plants, or debris is easy with the CargO Mount™ single bucket holder. Just slip the holder bracket into the tractor's rear CargO Mounts. Its all steel construction enables it to carry up to 40 lb (18.1 kg) of material.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Bucket holder (single)
Order number: LPJD100W

5-gal. (19-L) bucket

This black 5-gal. (19-L) bucket perfectly complements the CargO Mount™ single and double bucket holders. It is made of sturdy black plastic.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Bucket - 5 gal. (19-L)
Order number: LPJD400

8-oz Fuel-Protect gasoline stabilizer

John Deere Fuel-Protect gasoline stabilizer is a unique formula developed to ensure optimum performance and protection year-round: 

• Has corrosion preventers
• For lawn and garden equipment and other gasoline-powered vehicles
• Ensures quick starts in all two- and four-cycle engines
• Use in gasoline, gasoline-oil mixture, and ethanol blends
• Use to treat gas cans at each fill-up or use at every fill-up of vehicle
• Keeps fuel fresh for 12 months
• Contains a fuel injector and carburetor cleaner
• 1 oz treats 2 gal.

Always use fuel stabilizer in your gasoline.

Fuel sitting in gas tanks or gas containers for more than 30 days begins to degrade. Also, blended fuels and water in gasoline can form acids that corrode fuel-system components. Protect your investment - use John Deere fuel stabilizer with corrosion preventers and prevent hard starting, surging, lack of power, poor idle, flooding, and will not run or stay running conditions caused by poor-quality fuel. Ask your local John Deere dealer or visit JDParts.

Helpful tips:

• Add fuel stabilizer every time you purchase fuel.
• Deere gasoline-powered equipment is recommended to run on a minimum of 87 octane gasoline.
• John Deere Fuel-Protect for gasoline is safe to use in all types of gasoline, including gasoline/oil mixtures and blended fuels containing up to 10 percent ethanol.
• Use plastic fuel containers to store fuel; ask your local John Deere dealer.
• For best results, use a spill-proof gas can that automatically seals the gas can vent.
• Store fuel in a cool, dry, dark place in a sealed fuel can.
• Fill tank to the top every time the machine is put away.
  • Make sure tank is drained if stored for the winter or treated if left for prolonged periods of time.

Please refer to the operator’s manual for additional recommendations and warranty information.

Fuel related issues are not considered a warrantable condition as there is no defect in the materials or workmanship of the machine. 

For more information on fuel, visit John Deere Groundscare.

Seat net kit

Seat net kit provides a convenient storage area for gloves, and other small items. It is available for open-back seats.

Magnetic hitch pin

Fits John Deere lawn and garden tow behind attachments.

• Strong magnetic grip
• Rust resistant
• Easy to install, secure fit

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Magnetic hitch pin

Order number: LP63768

46-in. (117-cm) Front Blade

46-in. (117-cm) Front Blade used on loose material

The front blade is excellent for pushing light snow or other loose material.

The blade is constructed for good performance and long life:

• Blade surface is curved to roll rather than push material, which requires less power and increased blade capacity.
• Bolt-on, replaceable cutting edge takes most of the wear to greatly extend the useful life of the blade.

For operator convenience, the blade comes with standard equipment for controlling it from the tractor seat:

• Blade can be angled left, right, or used in the straight-ahead position.

Full working range

Full working range

The 46-in. (117-cm) blade can be operated up to 6.5 in. (16.5 cm) above ground level.

Floating action is designed into the lift linkage, so the blade is free to follow the contour of the ground.

The lift-linkage design makes raising the blade easy.

Controlled from tractor seat

Operator blade control

For operator convenience, the blade comes with angling and lift components as standard equipment so it can be controlled from the tractor seat.

Front blade lift and angling components are included as standard equipment:

• Blade can be angled left, right, or used in the straight-ahead position.
• For 100 Series Tractors, L100 Series Lawn Tractors, G110 Garden Tractors, and S240 Sport Tractor, lift components are provided with the blade so it can be raised and lowered from the tractor seat.

Specifications

Tractor compatibility and requirements

The 46-in. (117-cm) Front Blade is compatible with:

• 102, 115, 125, 135, 145, 155C, and 190C Tractors
• L100, L108, L110, L111, L118, L120, and L130 Lawn Tractors, and G110 Garden Tractor
• LA100, LA110, LA120, LA130, LA140, and LA150 Tractors
• LA105, LA115, LA125, LA135 Limited Edition, LA135 Special Edition, LA145, LA155, LA165, and LA175 Tractors
• D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170 Tractors
• S240 Sport Tractor

For model years 2016 and newer, the 46-in. (117-cm) Front Blade (BG20943) has a change to the mounting frame to make it compatible with model year 2016 and newer D100 Series and S240 Sport Tractors:

• The model years 2016 and newer Front Blades are also backward compatible with model year 2015 and older D100 Series Tractors and the S240 Sport Tractor.
• The model year 2015 46-in. (117-cm) Front Blade (BG20020) is not compatible with model year 2016 and newer tractors (SN 700,001-).
  • A model year 2016 and newer tractor steering change from a dual drag link system to a single drag link and tie rod design causes interference with older front blades.

Requirements and/or recommendations:

• Rear weights and tire chains are required for additional traction.

LG265 home maintenance kit

Typical home maintenance kit

Home maintenance kits are a handy and convenient way for dealers to supply a customer with the maintenance-interval parts as specified in their operator's manual.

The LG265 home maintenance kit includes the following:

34-lb (15.4-kg) front wheel weight

A durable cast-iron weight can be mounted to each front wheel.

These weights are recommended for use when operating on slopes, especially when the tractor is equipped with a rear grass bagger or other rear-mounted equipment.

Each weight requires BM17978 mounting hardware.

42-lb (19-kg) Quik-Tatch weight

42-lb (19-kg) weights and optional mounting bracket

The 42-lb (19-kg) Quik-Tatch can be used to counterbalance a heavy front or rear attachment and/or provide greater stability, especially when operating on hills.

This weight is constructed of cast iron and weighs approximately 42 lb (19 kg).

Some vehicles have built-in front and/or rear weight brackets to hang the weights on; others require a weight bracket that must be ordered separately.

X400/X500 Heavy-Duty Garden Tractors and X700 Series Tractors require the following parts when weights are installed on the front of the tractor:

• One  M147986 weight retaining rod (Parts)
• Two  M40461 spring clip (Parts)

Rear weight bracket (BG20022 shown)

Rear weight bracket shown with two 42-lb (19.1-kg) weights

The rear weight bracket provides a tractor-mounted bracket for hanging two weights:

• BG20627 replaces BG20022 and BG20499 rear weight brackets.
• Clearance is provided for the carbon canister that is required on tractors sold in California.
• BG20627 can be used in all applications where BG20022 and BG20499 were used.

30-lb (13.6-kg) front wheel-weight shown

Hardware is required for installing each front-wheel weight.

Requirements:

• Mounting may require drilling two holes in the wheel rim.
• BM17978 mounting hardware kit is required for each weight.

NOTE: Front-wheel weights are not available for special edition tractors because the styled front-wheel design does not have appropriate holes for mounting the wheel weights and no adapter is available.

48-­in. (122-­cm) Mower Deck (S240)

A complete mower deck can be ordered for replacement, if required.

Incomplete decks are also available through the John Deere Parts system. These decks include only the shell, discharge chute, and decals.

This AUC12522 48-­in. (122-­cm) Accel Deep replacement mower deck comes with three medium lift, side-discharge blades.

Dry-condition kit components

Dry-condition kit installed on mower deck

The BM26238 dry-condition kit, 48A is available for 48A Accel Deep Mower Decks used on S240 Tractors, model year 2016 and later X300 and X500 Select Series™ Tractors and Residential ZTrak™ Mowers. The 48A dry-condition kit will also work with any X700 Signature Series Tractor (model year 2013 and later) that is equipped with a 48A Mower Deck.

The dry-condition kit will reduce the amount of blowout around the mower deck when side discharging, mulching, or bagging in dry grass and leaf conditions. For optimum mowing performance in lush-grass conditions, the dry-condition kit baffles may be removed.

Mower deck leveling gauge

Leveling gauge allows quick and accurate mower deck leveling and cutting height adjustment.

Can be used for:

• Lawn tractors
• Lawn and garden tractors
• Riding mowers
• Front mowers
• Commercial walk-behind mowers
• Zero-turn-radius mowers

MulchControl advantages and benefits

Z535M ZTrak™ with Accel Deep 48A Mower

X730 Tractor with 48A Mower Deck

The MulchControl attachment for the 48A Mower Deck makes mulching more practical for many mowing situations because it not only does an excellent job of mulching but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material. Advantages of mulching grass clippings include:

• A beautiful looking lawn
• Grass clippings not blown onto the operator, driveways, or flower beds
• Less fertilizer use
• Elimination of the effort needed to dispose of clippings

How MulchControl works

MulchControl baffle open (similar mower from X700 Series Tractor shown)

MulchControl baffle closed (similar mower from X700 Series Tractor shown)

MulchControl is an innovative, simple design that is easy to use and maintain:

• The MulchControl attachment includes baffles to control the flow of material under the deck.
  • The MulchControl baffle, or divider, between the left and middle spindles is about half way down. The height is designed to balance the mulching and side-discharge modes.
  • When the MulchControl baffle is open, the divider between the left and middle spindles passes a portion of the material to the discharge opening, along with the material from the middle and right spindle areas.
  • When the MulchControl baffle is closed, this material stays within the deck and gets chopped into mulch and deposited in the turf.

MulchControl baffle closed

MulchControl handle

• The MulchControl handle is located on top of the mower deck and used to open and close the discharge baffle.
  • The operator is required to get off of the machine in order to engage or disengage mulch mode.
• Changing from mulching to side discharging or vice versa takes only a few seconds.

MulchControl is well-suited to the following mowing situations:

• Usually mulch, but side discharge when grass gets too long
• Usually side-discharge, but would like to be able to close the chute to control clippings
• Always mulch a main lawn, but often side discharge secondary lawns
• Bag clippings, but want to go farther before emptying bags

MulchControl puts the operator in control of the clippings. Now the operator can have all the benefits of mulching with the ability to easily change to side discharge or bagging when needed.

MulchControl limitations

While in the side-discharge mode, MulchControl will still mulch about one third of the material. Therefore, the side-discharge mode is essentially a partial-mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:

• When cutting strong southern grasses, such as Zoysia and Bermuda
• When cutting in wet, high-growth conditions, such as those found in the Pacific Northwest United States
• When optimum bagging and lawn clean-up is desired

Protective cover (medium deluxe)

Features include:

• Wipe-clean reinforced bottom around mower deck
• Easy-on side handles makes snugging down cover a snap
• Dual reinforced air vents let air circulate and help prevent ballooning in wind
• Interior lining and integrated muffler heat shield
• Heavy-duty fabric will not shrink or stretch and is coated for maximum water resistance
• Easy-on split back for fast fitting and easy access after installation
• Handy storage pocket reverses into an attractive storage case
• Two-year warranty

Cover provides heavy-duty protection for 100 Series, LT, LX, and S240 Tractors.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Protective cover (medium deluxe)

Order number: LP93617

Protective cover (standard)

Features include:

• Dual vents let air circulate and help prevent ballooning in wind
• Elastic shock cord in bottom hem for a quick, custom-like fit
• Coated fabric for maximum water protection
• One-year warranty

Cover provides all-season protection for 100 Series, S240 Sport and Select Series™ X300 Series Tractors.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Protective cover (standard)

Order number: LP93917

Seat cover, deluxe medium

Deluxe thick-cushioned seat cover provides superior protection, all-day riding comfort, and lots of storage:

• Access to lumbar adjustment controls
• Large-capacity rear-zippered cargo pocket
• Two side mesh beverage pockets
• Elastic cord in bottom hem for a custom fit
• Medium size fits seats with backrests up to 15 in. (38.1 cm)

Ordering information

Contact your local John Deere dealer for availability and pricing information.

Seat cover, deluxe medium
Order number: LP92624

Seat cover, standard medium

Seat cover protects new seats and renews old seats:

• Cushioned seat for extra comfort
• Four convenient pockets for keeping tools and gear within reach
• Elastic cord in bottom hem for a custom fit
• Medium size fits seats with backrests up to 15 in. (381 mm)

Ordering information

Contact your local John Deere dealer for availability and pricing information.

Seat cover, standard medium
Order number: LP92324

AM115838 spark arrester shown

Available to comply with laws in the state of California, requiring its use under certain conditions.

The law basically requires that purchasers of certain products be given written notice that it is illegal to use such machines on forest-covered, brush-covered or grass-covered land (except on watered lawns) without a spark arrester.

For further information on this law, consult No. 442.5 of the California Public Resources Code. Also available in other states to comply with local ordinances or customer requests.

15-gal. (57-L) Mounted Sprayer for D100 Series, S240

The 15-gal. (57-L) tractor-mounted sprayer is compatible with the S240 and D100 Series Tractors. Convenient mounting, easy maneuverability, and overall versatility make this a perfect choice for a John Deere lawn tractor. It provides an excellent way to apply spray material, including liquid fertilizer, weed killer, tree spray, and de-icer. It comes complete with a 32-in. (81-cm) boom that sprays a 60-in. (152-cm) spray swath. It is also equipped with a 19-ft (5.8-m) hose and a spray wand for spot spraying lawns, shrubs, etc. The fully adjustable brass spray wand tip achieves streams up to 30 ft (9.1 m). It has a custom mounting bracket that utilizes the existing frame holes for no-tools mounting after initial assembly. A recirculation kit is included.

Features include:

• Custom mounting hardware uses existing frame holes
• Mounts in seconds after initial assembly
• Compatible with S240 and D100 Series Tractors
• SHURflo® 100 psi, 2.1 gpm (8 L/min) on-demand diaphragm-type pump is designed for high-hour commercial applications. It can be run dry without damage.
• The brass-tipped spray wand is included as standard equipment. It is constructed of non-corrosive polypropylene material with Viton® components for multi-use applications.
• Check valves in boom tips prevent siphoning and dripping, which can cause lawn spotting
• Recirculation keeps material mixed and moving
• Control valve directs spray to either the boom or spray wand
• Convenient electrical hookup includes all necessary wiring
• Rugged translucent yellow tank with molded fill-level indicators (in gal. and L)

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

15-gal. (57-L) Mounted Sprayer for D100 Series and S240 Tractors

Order number: LP53283

SHURflo is a trademark of SHURflo, LLC.

Viton is a trademark DuPont Performance Elastomers.

15-gal. (57-L) Tow-Behind Sprayer

Sprayer comes complete with a boom that sprays 60 in. (152.4 cm) wide. It also has a 12-ft (3.7-m) hose with an adjustable handgun for spot spraying lawns, shrubs, etc.

Features include:

• This sprayer is an excellent choice for spraying small- to moderate-size lawns and shrubs.
• Handgun with adjustable spray pattern is helpful when spraying fruit trees and can be used to spray trees up to 30-ft (9.1-m) high.
• A 14-in. (35.6-cm) wand on the handgun is standard equipment to give added convenience when spraying trees.

NOTE: Sprayers are compatible with competitive tractors (if equipped with a 12-V battery and charging system).

This sprayer is especially suited for maintaining residential and small commercial properties:

• Sprayers provide an excellent way to apply liquid fertilizer.
• Herbicides and pesticides can be applied along with liquid fertilizer or separately.

Advantages of using liquid fertilizer over dry fertilizer:

• Fertilizer is more readily available to plants.
• The fertilizer need not be worked into the soil by watering or rain before it will work.
• Herbicides are more effective when applied with liquid fertilizer.

NOTE: Use these sprayers with liquid-base lawn care chemicals only. They are not recommended for wettable powders as no agitating system is provided to prevent particles from separating out.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

15-gal. (57-L) Tow-Behind Sprayer

Order number: LP19478

25-gal. (95-L) Tow-Behind Sprayer

Sprayer comes with a wider boom that sprays a 90 in. (228.6 cm) width. A 15-ft (4.6-m) hose and handgun are provided.

Features include:

• 100 psi Shurflo® diaphragm-type pump is designed for high hour commercial applications. It can be run dry without damage.
• Sprayer is designed to be a good choice for customers with larger lawns with trees to care for or for light commercial spraying.
• Handgun with adjustable spray pattern is helpful when spraying fruit trees and can be used to spray trees up to 30 ft (9.1 m) in height.
• The 14-in. (35.6-cm) wand on the handgun is included as standard equipment.

NOTE: Sprayers are compatible with competitive tractors (if equipped with a 12-V battery and charging system).

This sprayer is especially suited for maintaining residential and small commercial properties.

• Sprayers provide an excellent way to apply liquid fertilizer.
• Herbicides and pesticides can be applied along with liquid fertilizer or separately.

Advantages of using liquid fertilizer over dry fertilizer:

• Fertilizer is more readily available to plants.
• The fertilizer need not be worked into the soil by watering or rain before it will work.
• Herbicides are more effective when applied with liquid fertilizer.

NOTE: Use this sprayer with liquid-based lawn care chemicals only. It is not recommended for wettable powders as no agitating system is provided to prevent particles from separating out.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

25-gal. (95-L) Tow-Behind Sprayer

Order number: LP19479

SHURflo is a trademark of SHURflo, LLC.

125-lb (57-kg) Pull-Type Spin Spreader

John Deere spin spreaders have features and a choice of sizes to satisfy many operators. They are a popular attachment for both homeowner and commercial operators who use them for even distribution of a variety of materials:

• Seed
• Fertilizer
• Insecticide
• Salt

All spreaders have rust-resistant stainless-steel or polyethylene hoppers as well as many stainless-steel components to ensure lasting appearance and long, trouble-free operation.

Features include:

• Positive on/off system (no cables)
• 125-lb (57-kg) capacity corrosion-resistant polyurethane hopper
• 13-in. (33-cm) pneumatic tires for easy rolling
• Enclosed gearbox (metal gears)
• Ergonomic dual handle featuring Accu-way™
• Accu-way even spread pattern adjustment
• Includes screen and cover

Accu-way is a trademark of Spyker Spreaders, Inc.

Hopper screen and throat opening

Hopper screen and throat opening

Hopper screens keep out debris and serve as chunk graters.

A stainless-steel hopper bottom plate/throat opening resists rust and corrosion, which extends the life of the spreader.

Spinner

Spinner

Spinners are made of high-impact plastic that will not crack or break.

Dial-A-Matic rate control

Dial-A-Matic rate control

The Dial-A-Matic rate control lets the operator fine-tune the rate application:

• Dial position locks and unlocks automatically.
• More than 80 settings provide an accurate application of materials.

Specifications

Accu-way is a trademark of Spyker Spreaders, Inc.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

125-lb Pull-Type Spin Spreader

Order number: LP25353

175-lb (79-kg) Pull Spreader

John Deere spin spreaders have features and a choice of sizes to satisfy many operators. They are a popular attachment for both homeowner and commercial operators who use them for even distribution of a variety of materials:

• Seed
• Fertilizer
• Insecticide
• Salt

All spreaders have rust-resistant stainless-steel or polyethylene hoppers as well as many stainless-steel components to ensure lasting appearance and long, trouble-free operation.

Features include:

• Positive on/off system (no cables)
• 175-lb (79.4-kg) capacity corrosion-resistant polyurethane hopper
• 13-in. (33-cm) pneumatic tires for easy rolling
• Fully enclosed gear box with metal gears for long life
• Accu-way even spread pattern adjustment
• Includes screen and cover

Hopper screen and throat opening

Hopper screen and throat opening

Hopper screens keep out debris and serve as chunk graters.

A stainless-steel hopper bottom plate/throat opening resists rust and corrosion, which extends the life of the spreader.

Spinner

Spinner

Spinners are made of high-impact plastic that will not crack or break.

Dial-A-Matic rate control

Dial-A-Matic rate control

The Dial-A-Matic rate control lets the operator fine-tune the rate application:

• Dial position locks and unlocks automatically.
• More than 80 settings provide an accurate application of materials.

Specifications

Accu-way is a trademark of Spyker Spreaders, Inc.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

175-lb Pull-Type Spin Spreader
Order number: LP25354

40-in. (102-cm) Tow-Behind Aerator Spreader

The 40-in. (102-cm) Aerator Spreader can do two jobs at once. It perforates the soil while the calibrated drop-spreader follows with seed, lime, or fertilizer. It can also be used to just aerate the lawn:

• 40-in. (102-cm) width, with up to 2 in. (5.1 cm) of penetration
• 132 steel-tine tips on 8-in. (20-cm) diameter tine stars
• Three-position, full-sized lift lever
• Direct spreader drive for consistent performance
• Adjustable flow control
• 100-lb (45-kg) spreader capacity
• 4.10/3.5-4 pneumatic tires for easy pulling
• 75-lb (34-kg) capacity weight tray

Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications 

Vehicle compatibility and requirements

Requirements and/or recommendations: tow-behind equipment

1. Rear wheel weights are recommended for additional traction.
2. The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower or Residential ZTrak™ Mower.
3. The loaded weight of the utility cart not to exceed the weight of the vehicle and operator.
   The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).
4. For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tow-Behind Aerator Spreader

Order number: LPAS40JD

130-lb (59-kg) Pull-Type Spin Spreader

Broadcasts fertilizer, weed control, grass seed or ice melter products while towing behind a riding lawn tractor. 130-lb (59-kg) polyethylene hopper resists rust and is easier to clean. Spread pattern will go up to 12 ft (31 cm) depending on speed and material. New direct rod control with easy to reach handle opens and closes the material gate. Heat treated steel gears with plastic enclosure are protected from corrosive material. Large knobby tread tires roll easily over turf.

Two-year warranty.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

130-lb Pull-Type Spin Spreader
Order number: LP39087

Broadcast Spreader

This 175-lb (79-kg) pull-type broadcast spreader is designed for homeowner use:

• The polyethylene hopper will not dent or rust.
• All stainless-steel interior hardware, shaft, and agitator help to prevent corrosion.
• Large pneumatic turf tires ensure a positive drive and smooth operation.
• High-speed, 6:1 reduction glass-filled nylon gears provide the widest spread pattern at the slowest speeds.
• Fully enclosed gearbox eliminates downtime and maintenance.
• Autoflow feature stops the flow of materials - automatically - to prevent burns.
• Directional spread-pattern control feature provides positive shutoff along sidewalks and driveways.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

175-lb (79-kg) Broadcast Spreader

Order number: LPBS36JD

Sun canopy

The sun canopy provides protection from the sun's rays and gives the operator some cooling shade during the hot summer days.

Quick sun protection for 100 Series Tractors:

• Slips into CargO Mount™ system ports for quick installation
• Protects operator from the sun’s rays
• Tough woven polyester construction for strength and durability
• Designed to fit 100 Series Tractors

Ordering information
Please contact your local John Deere dealer for availability and pricing information.

Sun canopy
Order number: LP68122

40 in. (102-cm) Tow-Behind Thatcherator

The 40-in. (102-cm) Thatcherator can be used as a dethatcher or an aerator. It can also be used to prepare an area for seed:

• 40-in. (102-cm) width to cover ground fast
• 20 spring-loaded tines for maximum performance
• Three-position adjustment
• Weight tray to allow increased scratching power

An 8-in. (20-cm) extension is available to provide widths of 48 in. (122 cm) and 56 in. (142 cm) (Add an extension to one end of Thatcherator to make it 48-in. (122-cm) wide and an extension to both ends for a 56-in. (142-cm) width.)

Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications

Requirements and/or recommendations: tow-behind equipment

1. Rear wheel weights are recommended for additional traction.
2. The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower, or Residential ZTrak™ Mower.
3. The loaded weight of the utility cart not to exceed the weight of the vehicle and operator. The loaded weight of any attachment towed by an EZtrak or Residential ZTrak Mower not to exceed 250 lb (113 kg).
4. For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tow-Behind Thatcherator

Order number: LPTA40JD

TerraGrip Traction Belt

Protect your driving surface. TerraGrip Traction Belts offer enhanced traction on snow, mud, dirt, wet asphalt, and wet concrete surfaces. They will not scratch or chip concrete, asphalt, or aggregate drives or walkways. The proven reliability of the traditional steel chain attachment system is used and combined with the performance and durability of reinforced rubber slats. The rubber slats wrap around the tire so only rubber touches the driving surface. The result is aggressive traction without the risk of surface damage, that can happen with traditional chains.

Features:

• Rubber slats surround the tire and will not damage driveways or sidewalks.
• No steel touches the driving surface.
• No-tools installation utilizes a traditional steel chain attachment system.
• Traction is improved on all surfaces, especially loose material (snow, dirt, mud, sand, etc.).
• TerraGrip Traction Belts are approved for John Deere X300, X500 M-T, and X700 Series Tractors.

Additional information for 4-wheel-steer tractor models:

• X700 Series – requires wheel spacer sold separately
• X500 Series – requires wheel stop adjustment
• X300 Series – no additional requirements

Tire chain with optional wheel weights on X728 Tractor

Chains are recommended for extra traction when using attachments such as a snow blower or front blade.

One pair of chains is included in each bundle.

TY15959 tire chains - 20x8-8
NOTE: For LA105, LA115, LA125, D100, D105, D110, D120, and D125 Tractors.

TY16200 tire chains - 20x10-8, 20x10-10
NOTE: For LA135 SE, LA145, LA155, D130, D140, D150, D155, S240, X300/less deck, X300/38X, X300/42M, X300/42X, X300/48X, X300R, X304, and X324 Tractors.
NOTE: 20x10-8 tires and 20x10-10 tires use the same chains as the height and width are the same. The rim diameter is larger for four-wheel steer tires, but does not affect chain requirements.

TY25229 tire chains - 22x9.5-12
NOTE: For LA165, LA175, D160, and D170 Tractors.

TY24327 tire chains - 22x11-10
NOTE: For X320, X340, and X360 Tractors.

TY15956 tire chains - 23x10.5-12
NOTE: For 190C Tractor.

TY26227 tire chains - 23x9.5-12, 24x9.5-12
NOTE: For X534 Tractor.

TY24328 tire chains - 24x12-12
NOTE: For X500, X520, X530, X540, and X590 Tractors. Also use with 26x10.5-12 tires on model year 2016- (SN 040,000-) X734 and X754.

TY25326 tire chains - 26x10.5-12
NOTE: For model year -2015 (SN -040,000). For X724, X734, X744, and X754 Tractors. Fits turf, bar, and heavy-duty all-purpose (HDAP) tire treads.

TY15958 tire chains - 26x12-12
NOTE: For X700, X710, X720, X730, X728, X738, X729, X739, X740, X750, X748, X758, and X749 Tractors. Will fit turf, bar, and HDAP tire treads. X729, X739, and X749 require BM22725 wheel spacer kit to provide clearance when installing tire chains.

42-in. (107-cm) Lawn Sweeper

The 42-in. (107-cm) Lawn Sweeper offers great performance and hauls an incredible 17 bu (599 L) of material. Its design gives superior brush-to-ground contact to prevent skipping and provide maximum performance for a clean path the first time through.

Features include:

• 42-in. (107-cm) clearing width
• 17-bu (599-L) capacity to make fast work of picking up material
• Convenient brush-height adjuster has eight positions for easy selection of the optimum sweeping height
• Hitch has seven positions to match up correctly with a variety of vehicles
• Large 12-in. (305-mm) x 3-in. (76-mm) wheels with bar tread have good gripping action to ensure positive brush rotation
• A unique storage feature allows the sweeper to collapse and be stored vertically to minimize storage space

Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

42-in. (107-cm) Tow-Behind Lawn Sweeper
Order number: LPSTS42JD

Dethatcher kit for sweeper

This John Deere dethatcher kit has two rows of individually flexing tines that gently but effectively remove grass clippings, leaves, and other lawn debris from your lawn. The kit easily attaches to the front of John Deere's 42-in. (107-cm) Lawn Sweeper (LPSTS42JD) to add thatch pickup to the sweeper's cleaning abilities. The dethatcher does not need to be removed to resume regular sweeping use.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Dethatcher kit for sweeper

Order number: LP42108

Multi Tool

The Multi Tool includes one platform and two separate attachments, saving space and money.

• Includes 40-in. (101.6-cm) weight tray - capable of holding up to 100 lb (45.4 kg) of weight
• Includes pre-assembled core aerator - reduces soil compaction allowing air, water, and fertilizer to the grass roots
• Includes dethatcher - removes unwanted debris from the top of the soil to allow nutrients to reach the grass roots
• Elongated handle - makes it easier to raise into transport or lower for use
• Spring assisted lever - makes changing the attachments quick and easy

John Deere has combined the best lawn tools into one package.

Two-year warranty.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Multi Tool

Order number: LP39089

36-in. (91-cm) Tow-Behind Lawn Roller

The Lawn Roller packs down sod, seed, and mole ridges. Its tough polyethylene drum does not dent or rust. The drum's rounded ends do not gouge the lawn or make ruts:

• 36-in. (91-cm) wide polyethylene drum
• 390-lb (177-kg) weight for excellent leveling
• Rounded end caps to reduce gouging
• 42-U.S. gal. (159-L) capacity
• Long-lasting Nylatron® bearings

Nylatron is a trademark of QUADRANT AG or its affiliates or licensors.

Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications

Requirements and/or recommendations: tow-behind equipment

1. Rear wheel weights are recommended for additional traction.
2. The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower or Residential ZTrak™ Mower.
3. The loaded weight of the utility cart not to exceed the weight of the vehicle and operator. The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).
4. For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

36-in. (91-cm) Tow-Behind Lawn Roller

Order number: LPPRT36JD

40-in. (102-cm) Tow-Behind Plug Aerator

The 40-in. (102-cm) Plug Aerator removes plugs of soil up to 3-in. (7.6-cm) deep to allow penetration of air, water, and nutrients. It also helps relieve soil compaction:

• 40-in. (102-cm) width with up to 3 in. (7.6 cm) of penetration
• Three-position lift handle for 2-in. (5-cm) or 3-in. (7.6-cm) plug lengths
• 28 carbonized, 16-gauge, 0.06-in. (1.5-mm) steel, individually serviceable plugging tines
• 1-in. (2.5-cm) diameter high-carbon steel-tine shaft
• 4.10/3.50-4 pneumatic tires for easy pulling
• 175-lb (79-kg) capacity weight tray

Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications

Vehicle compatibility and requirements

Requirements and/or recommendations: tow-behind equipment

1. Rear wheel weights are recommended for additional traction.
2. The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mowers, or Residential ZTrak™ Mowers.
3. The loaded weight of the utility cart not to exceed the weight of the vehicle and operator.
   The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).
4. For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tow-Behind Plug Aerator

Order number: LPPA40JD

40-in. (102-cm) Tow-Behind Spiker Aerator

The 40-in. (102-cm) Spiker Aerator penetrates soil, allowing air, water, and nutrients to enter the lawn. It also relieves soil compaction:

• 40-in. (102-cm) width with up to 2 in. (5 cm) of penetration
• 10-in. (25-cm) diameter steel-tine stars
• 132 steel-tine tips on 11 spike wheels
• 3.5-in. (9-cm) spike-wheel spacing
• Full-sized lift lever
• 4.10/3.5-4 pneumatic tires for easy pulling
• 100-lb (45-kg) capacity weight tray 40-in. (102-cm) width with up to 3 in. (7.6 cm) of penetration

Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications

Requirements and/or recommendations: tow-behind equipment

1. Rear wheel weights are recommended for additional traction.
2. The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower, or Residential ZTrak™ Mower.
3. The loaded weight of the utility cart not to exceed the weight of the vehicle and operator. The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).
4. For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tow-Behind Spiker Aerator

Order number: LPSAT40JD

Snow cab shown on a D100 Series Tractor

The roomy steel-frame cab shields the operator against snow, rain, sun, and wind to make snow removal a more pleasant experience.

The snow cab is compatible with all 100 Series and S240 Sport Tractors:

• D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180, and S240

Zippered-access hole for control arm

Inside mesh storage pocket

Roomy steel frame cab shields against snow, rain, sun and wind.

Key features include:

• Double-zippered access hole for control maneuverability
• Interior mesh pockets to hold accessories
• Super-clear vinyl windows are cold-crack tested to -4°F (-20°C)
• Internal non-scratch magnets to ensure a custom fit - no tool necessary
• Zippered doors have a snap-lock system to hold them open
• Rear locking panel holds enclosure tight against tractor frame
• Assembles and installs with standard hand tools

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Snow cab

Order number: LP68121