455Semoir à pliage avant
- Système breveté de colis hydraulique pour pression constante vers le bas
- Ouvre-sillons à double disque
- Contenances de la boîte de semences
- Accessoires de graminées
Caractéristiques
Afficher tout
Réduire tout
Transport routier étroit
Trémie à semences
Combinaison à trois positions de la boîte à grain/engrais
Le bâti repliable avant permet des transports étroits
Transport routier étroit
Un système de repliage/dépliage entièrement hydraulique à l’avant permet un repliage sur les semoirs 455, pour le transport lors d’une opération menée par une seule personne.
- Le repliage ou le dépliage prend moins de cinq minutes
- La largeur de transport est étroite : 4,60 m (15 pi 2 po)
La garde au sol élevée de l’ouvre-sillon en transport permet de passer sur des fossés, passages à niveau et autres endroits problématiques sans inquiétude.
Dégagement de l’ouvre-sillon à la route :
- 530 mm (21 po) sur les modèles de 9,15 m (30 pi) et 10,70 m (35 pi)
- 450 mm (18 po) sur le modèle de 7,60 m (25 pi)
Les unités sont relevées et abaissées pour le transport avec les vérins de relevage de série :
- Deux vérins de 75 mm x 200 mm (3 po x 8 po) sur le semoir de 7,60 m (25 pi)
- Deux vérins de 90 mm x 254 mm (3-1/2 x 10 po) sur les semoirs de 9,15 m (30 pi) et de 10,70 m (35 pi)
Les quatre pneus sont montés sur bâti : 11L-15, 10 PR, à nervures, sur les trois tailles de semoir.
Des feux d’avertissement sont fournis de série pour une meilleure visibilité lors du transport.
Contenances de la trémie à semences
Trémie à semences
Combinaison à trois positions de la boîte à grain/engrais
Les trémies à semences offrent une grande contenance qui permet de plus longs intervalles sans rechargement.
Des trémies à semences pour grains simples ou pour grains et engrais combinés sont disponibles en fonction des besoins du producteur.
La trémie à grain/engrais polyvalente est munie d’un séparateur à trois positions, pouvant être réglé pour 100 %,
60 % ou 40 % de semences.
Contenance des trémies à semences |
||||
|
Semences uniquement |
Mixtes pour semences/engrais |
||
Séparateur à 3 positions |
||||
100 % de semences |
60 % de semences |
40 % de semences |
||
Grain, l/m (boisseau/pi) |
324 (2,8) |
320 (2,76) |
168 (1,82) |
152 (1,35) |
Engrais, kg/m (lb/pi) |
— |
— |
168 (113) |
226 (152) |
Total, l/m (boisseaux/pi) |
324 (2,8) |
320 (2,76) |
3,4 (393) |
3,4 (393) |
-
Les cloisons dans la trémie réduisent le mouvement du contenu et contribuent ainsi à une efficacité d’ensemencement accrue.
-
Une jauge visuelle en verre, située à l’extrémité de la trémie, permet à l’opérateur de voir le niveau de semences en un clin d’œil.
-
Les marchepieds en acier dotés de perforations de 530 mm (1 po) de diamètre permettent un accès pratique et sûr aux trémies à semences/engrais.
-
La conception de trémie en ligne permet un remplissage facile et rapide.
Un accessoire de semoir de graminées est disponible (voir les accessoires dans le manuel de ventes des produits agricoles). Le semoir de graminées se fixe à l’avant de la trémie à semences et est généralement utilisé pour les graminées et la luzerne.
Les plaques de protection de réservoir sont disponibles comme accessoires (voir les accessoires de conversion hors usine).
-
Protège les panneaux d’extrémité de la trémie des dommages
-
Idéal pour une utilisation sur un terrain très irrégulier, où les panneaux de trémie pourraient se heurter
Spécifications et comparaison
Add Model
Spécifications et comparaison |
||||
|---|---|---|---|---|
| Vous pouvez comparer les spécifications d'au plus 4 modèles | John Deere455Semoir à pliage avant |
Dimensions
| Largeur de transport | 15, 2 ft, in. 15, 2 ft, in. 15, 2 in. |
|||
|---|---|---|---|---|
| Hauteur de transport | 6, 11 ft, in. 6, 11 ft, in. 6, 11 ft, in. |
|||
| Longueur hors tout | 22 ft 24, 6 ft, in. 27 ft |
|||
| Poids | ||||
| Garde au sol |
Capacités
| Grains uniquement | 70 bu 84 bu 98 bu |
|||
|---|---|---|---|---|
| Grains et engrais | 85 bu 102 bu 119 bu |
Distributeurs
| Type | Fluted-feed Fluted-feed Fluted-feed |
|---|
Ensemble d'ouvre-sillons
| Nombre d’ouvre-sillons | 30, 40, 50 36, 48, 60 42, 56, 70 |
|||
|---|---|---|---|---|
| Espacement | 6, 7.5, 10 in. 6, 7.5 10 in. 6, 7.5, 10 in. |
|||
| Pression vers le bas | Active hydraulic Active hydraulic Active hydraulic |
|||
| Lames | 13.5 offset 0.25 in. 13.5 offset 0.25 in. 13.5 offset 0.25 in. |
|||
| Roues de profondeur | ||||
| Roues plombeuses | Standard 2 x 13 in. Standard 2 x 13 in. Standard 2 x 13 in. |
|||
| Roues de couvre-sillons |
Contrôleur d'ensemencement
| Type | SeedStar or ComputerTrak 250, 350, 450 SeedStar or ComputerTrak 250, 350, 450 SeedStar or ComputerTrak 250, 350, 450 |
|---|
Renseignements supplémentaires
| Date de collecte |
|---|
Accessoires et instruments
Afficher tout
Réduire tout
Drawbar support
ComputerTrak 150 monitor
ComputerTrak 150 monitor
Select lift
Select lift
ComputerTrak 350
Frame
Drawbar Hammer Strap Spacer Kit for 7000 Series Tractors - BN280616
Drawbar support
Drawbar support is required for 35-ft drills when using a 7800 Tractor.
Miscellaneous
Mounting Bracket for 30, 40, 50, 55, and 60 Series Tractors for Control Console Only - BN280048
ComputerTrak 150 monitor
For installing 150, 250, 350, and 450 ComputerTrak monitors and front-fold control console with Deutsch connector or half-width disconnect control console on 1760 and 1770 12N Planters. Includes monitor mounting brackets, cab access, and rear connector mounts. Does not include radar equipment. Radar is required except when using the 150 monitor.
Mounting Brackets for 7000, 8000, and 9000 Series Tractors for Control Console Only - BN280236
ComputerTrak 150 monitor
For installing 150, 250, 350, and 450 ComputerTrak monitors and front-fold control console with Deutsch connector or half-width disconnect control console on 1760 and 1770 12N Planters. Includes monitor mounting brackets, cab access, and rear connector mounts. Does not include radar equipment. Radar is required except when using the 150 monitor.
Open Center Kit with Closed Center Change Valve - BN280593
The open-center hydraulic check valve is a pilot-operated check valve which traps oil to opener cylinders, maintaining preset position when tractor valve is neutralized. This check valve is required if drill is to be connected to tractors with open-center hydraulic system. It may also be used with closed center hydraulic systems. If the tractor valve is not neutralized on open-center tractors, damage to tractor will result (heat buildup in the hydraulic system). Kit includes: check valve, pilot line and necessary hydraulic fitting for installation.
- NOTE: This should be ordered when drills are rented or leased.
Select-Lift Kit for 30, 40, 50, 55 and 60 Series Row Crop Tractors - 25 Ft. Drills - BN907247
Select lift
The select lift kit allows an operator to selectively disengage a complete box and openers, and is ideal when drilling out point rows and headlands.
The control switch is located in the tractor cab, and there is a toggle switch for each box. One master switch is used to override or disengage system. Switches activate solenoids, which reverse oil flow, raising openers out of ground and disengaging clutches.
NOTES:
1. 4WD tractors require one R100373 adapter plate to mount the console and one AN280262 wiring harness to extend the console harness (Parts).
2. On tractors with a two-pin convenience electrical outlet, order one AA37254 (Parts) two-pin to three-pin adapter.
3. On tractors without a convenience electrical outlet, order one AE50549 and one AA37254 (Parts).
4. Compatible with closed-center or pressure-compensated hydraulics. Not compatible with open-center hydraulics.
Select-Lift Kit for all 7000 and 8000 Series Tractors - 25 Ft. Drills - BN907226
Select lift
The select lift kit allows an operator to selectively disengage a complete box and openers, and is ideal when drilling out point rows and headlands.
The control switch is located in the tractor cab, and there is a toggle switch for each box. One master switch is used to override or disengage system. Switches activate solenoids, which reverse oil flow, raising openers out of ground and disengaging clutches.
NOTES:
1. 4WD tractors require one R100373 adapter plate to mount the console and one AN280262 wiring harness to extend the console harness (Parts).
2. On tractors with a two-pin convenience electrical outlet, order one AA37254 (Parts) two-pin to three-pin adapter.
3. On tractors without a convenience electrical outlet, order one AE50549 and one AA37254 (Parts).
4. Compatible with closed-center or pressure-compensated hydraulics. Not compatible with open-center hydraulics.
Monitor System
ComputerTrak 350 - 4 rows through 32 rows - BA31919
ComputerTrak 350
The ComputerTrak 350 monitors use electronic circuitry, radar distance measuring, and a large liquid crystal display to provide sophisticated monitoring with simple operation. Along with this, the ComputerTrak 350 can monitor up to 32 rows simultaneously.
The ComputerTrak 350 monitor solution is available as an optional feature for the following planter and drill models:
| Drawn planters | Integral planters | Drills |
| 1750 Planter Series | 1700 Planter Series | 455 |
| 1760 Planter Series | 1710 Planter Series | 1590 |
| 1760NT Planter Series | 1720 8-Row and 12-Row Planters | |
| 1770 Planter Series | 1730 Planter Series | |
1780 Planter Series |
All other planter configurations will only have SeedStar™ 2 monitoring system available with no option for the ComputerTrak 350 monitoring system.
ComputerTrak 350 features include:
-
Liquid crystal display provides operator with information regarding the planter function
-
High/low warning alarm provides warning limits for seed population; this allows the operator to set the upper and lower population limits at which a warning is given
-
Monitors population by row scan, by individual row, or by the minimum/average/maximum features; the minimum/average/maximum feature alternately displays row number and data for the lowest and highest population and the average population
-
Displays seed spacing or population for all rows, showing the minimum/average/maximum for all rows
-
Radar distance measuring is base equipment; this can be field calibrated by the operator for improved accuracy
-
Ground speed of the planter can be displayed
-
Non-volatile memory allows the console to be disconnected from the battery and still retain the program
-
Built-in self-diagnostics check the continuity of all monitor sensor circuits upon power-up, providing up-and-ready display
-
Console is easy to program for special planting patterns such as skip rows, etc.
-
Monitor alarm can be turned off when multiple outside planting units indicate no seed flow, such as when using the half-width disconnect
-
Enables accumulating count of seeds planted by a single row for any distance
-
Allows measuring the total distance required to plant a desired quantity of seeds
-
A second acre counter, allowing two counters of area to be used
-
Split function allows two different planter configurations; this complements the 1790 for corn and soybean operations
-
Population adjustment allows a fudge factor to be used to adjust the displayed population for situations when the calculated population is not being correctly displayed
NOTE: ComputerTrak 350 monitors require a radar input. Radar is ordered separately from monitor.
In the event of a radar or radar input failure, the ComputerTrak 350 monitor has the capability to continue with the monitoring of seed flow. If a disk-failed message occurs on this monitor, a set speed, or known as speed-set mode, can be entered to allow continued operation until the radar or radar input error has been resolved.
When in speed-set mode, fast average, area, and speed readouts will not be available. Row-failed messages will occur when seed count drop below two seeds per second. High- and low-population warning messages are also deactivated in this mode.
Also while in speed-set mode, the monitor is going to show fluctuating populations because it assumes the machine is traveling at a constant speed, even though actual populations may remain accurate at slower and faster speeds. Displayed population will only be close to actual populations when actual ground speed matches set speed.
To enter speed-set mode, please follow the following steps:
-
Hold the split on/off switch while turning monitor on. A full display screen will be displayed for a few seconds and then the row-failed screen will display.
-
Release the split on/off switch and press the setup-select switch. The speed screen will be the first displayed. The speed will be displayed in the lower right-hand corner of the display.
-
Use the digit select and 0-9 switches to enter expected planting speed.
-
Press the scan switch to being monitoring of seed flow.
If power is lost to monitor for any reason, hold the split on/off switch for one second while powering monitor on to re-enter speed-set mode. Previously entered speed is stored in memory and will not have to be re-entered.
NOTE: The speed-set mode is deactivated each time monitor is powered off.
-
1715 Semoir de précision -
1725C Semoir de précision -
1745 Semoir compact -
1765 Flexible Semoirs de précision tractés -
1775NT 12Row30 Semoir de précision tracté -
1775NT 16Row30 Semoir de précision tracté -
1775NT 24Row30 Semoir de précision tracté -
1785 Semoir de précision -
1795 12 rangs, 23/24 jumelés Semoir de précision -
1795 16 rangs, 31/32 jumelés Semoir de précision -
1795 24Row20 Semoir à précision -
DB44 24Row22 Semoir de précision -
DB60 36Row20 Semoir de précision -
DB60 à 24 rangs 30 Semoir de précision -
DB60 à 24 rangs 47 jumelés Semoir de précision -
DB60 à 24 rangs 48 jumelés Semoir de précision
-
DB66 36Row22 Semoir de précision -
DB80 32Row30 Semoir de précision -
DB80 48Row20 Semoir de précision -
DB88 48Row22 Semoir de précision -
DB90 36 rangs 30 Semoir de précision -
DB90 54Row20 Semoir de précision -
DB120 48Row30 Semoir de précision -
DR12 Semoir de précision -
DR16 Semoir de précision -
DR18 Semoir de précision -
DR24 Semoir de précision
Magasiner et acheter
Entretien et soutien
Ceci pourrait également vous intéresser
Les caractéristiques du produit sont basées sur les informations disponibles au moment de la publication. Elles peuvent être modifiées sans préavis. Communiquez avec votre concessionnaire John Deere local pour obtenir de plus amples renseignements.