- Home & Workshop Products
A slow-running EPA Final Tier 4 (FT4)/EU Stage IV diesel engine delivers proven performance in mining, quarrying, roadbuilding, and other large-scale applications.
Standard Eco mode maximizes fuel economy without loss of performance, automatically adjusting engine rpm and transmission settings based on load to burn up to 15-percent less fuel depending on application.
Dual-path hydrostatic transmission allows you to push a full load through turns without losing material, unlike torque-converter transmissions on many competitor machines.
Independent track control speeds up or slows each side — for smooth, full-power turns.
Rip hard ground fast with hydrostatic transmission’s automatic adjustments of speed and torque.
New suspended double-bogie undercarriage is designed to reduce peak vibrations in the operator station by up to 75 percent, minimizing breakdowns and wear caused by harsh impacts in rocky environments and boosting productivity
Both Extended Life and Heavy-Duty undercarriages with sealed and lubricated track (SALT) have a no-nonsense oval-track design with only one wear-causing forward-travel flex point, for longer life. One-piece welded mainframe resists torsional stress, absorbs shock loads, and delivers maximum strength while allowing handy service access to major components.
Low-effort controls command blade curvature and the full-featured hydrostatic drivetrain, delivering predictable response at all times and virtually eliminating jerky or abrupt movements.
Ergonomically correct joystick provides intuitive, low-effort control of steering, direction, and ground speed. Detented so it doesn’t require an operator’s constant touch or attention, it employs a thumb-actuated travel-speed-control switch.
Total Machine Control (TMC) monitor lets an operator select decelerator mode and response, forward/reverse ground-speed ranges, steering modulation, F-N-R shift rate, and forward/reverse speed ratios, for superb control.
Large hinged doors provide access to dipsticks, fill tubes, maintenance-free batteries, and vertical filters. Convenient service points make quick work of the daily routine. Operator stations tilts a full 70 degrees in only minutes, for wide-open drivetrain-component access.
A stockpiling package with large 32-cubic-yard coal blade is available for coal-stockpiling applications. If taking out trash is on the agenda, a purpose-built waste-handler package with choice of multiple blade options is available. Additional seals and guarding, a high-debris radiator, and a deluxe 10 LED worklight package that can help boost productivity at all hours are some of the heavy-duty features of both stockpiling and waste-handler packages.
Thanks to electrohydraulic controls, the 1050K Dozer is grade-control ready, making adding a system as easy as plugging in the components, calibrating, and going to work, whether you prefer Leica, Trimble, or Topcon.
|Specs & Compare|
|Select up to 4 models to compare specifications||
|Engine Manufacturer||John Deere|
|Engine Model||PowerTech PSS 6135|
|Displacement, ltr (Inches³)||13.5 (824)|
|Rated Speed, rpm||1800|
|Engine Output - Net, kW (hp)||261 (350)|
|Speeds Mode 1 - Forward||1|
|Speeds Mode 1 - Reverse||1|
|Shoe - Pitch, mm (inches)||215.9 (8.5)|
|Shoe - Type||Single Grouser - Extreme Service|
|Ground Contact Area, cm² (Inches²)||41684 (6462)|
|Number Of Shoes||46|
|Height - Max, mm (ft/in)||3476 (11 ft 5 in)|
|Ground Clearance, mm (inches)||537 (21)|
|Track Length - On Ground, mm (ft/in)||3419 (11 ft 2 in)|
|Track Gauge, mm (ft/in)||2184.4 (7 ft 2 in)|
|Blade - Width, mm (ft/in)||3964 (13 ft )|
|Blade - Dig Depth, mm (inches)||707 (28)|
|Blade - Tilt, mm (ft/in)||900 (2 ft 11 in)|
|Steering - Differential||No|
|Fuel Tank, ltr (gallons (US))||681 (180)|
|Hydraulic Tank, ltr (gallons (US))||87 (23)|
|Blade - Capacity, m³ (yd³)||9.5 (12.4)|
|Speed - Forward Maximum, kph (mph)||11 (6.8)|
|Speed - Reverse Maximum, kph (mph)||11 (6.8)|
|Ground Bearing Pressure, kPa (PSI)||101 (14.6)|
|Implement Pump - Type||Variable Displacement Piston|
|Implement Pump - Flow, lt/min (gallons (US) / min)||290 (77)|
|Implement Pump - Pressure, bar (PSI)||249.93 (3625)|
|Operating Weight, kg (lbs)||42800 (94300)|
Get more work done more efficiently through our suite of precision construction solutions.
Stay up and running and lower your costs by making the most of our world-class dealer network.
You need a finance team that gets in the trenches to learn about your entire operation – not just your credit score.
Features and specifications are based on published information at the time of publication. Features and specifications are subject to change without notice.