Pressure washers, transfer pumps and vacuums

Pressure washers, transfer pumps and vacuums

Take on any cleaning project.

For those who take cleaning seriously, John Deere offers a wide variety of light to heavy duty pressure washers. Our heavy-duty frame ensures that our washers won't vibrate and cause premature wear and tear. Plus, the new GatorPal™ washer is designed to fit in your John Deere Gator™ for cleaning in remote areas

PR Series / Gasoline

ImageProductDetails

PR-3200GM

3200 PSI, Gas
212cc John Deere branded OHV Engine

  • 2.7 gallons per minute flow rate
  • Adjustable pressure unloader valve
  • 50-ft. x 3⁄8-in. high pressure hose with quick connect
  • Direct drive crankshaft pump with ceramic pistons
  • Thermal relief valve to prevent the pump fromoverheating
  • Convenient handles with hose wrap and wand holder
  • 3 quick connect spray nozzles for a wide variety ofcleaning tasks – 15°, 25° and detergent
  • Low pressure detergent injector to apply recommended detergents
  • 36-in. lance assembly with trigger gun

PR-3200GH

3200 PSI, Gas
196cc Honda GX Engine

  • 2.7 gallons per minute flow rate
  • Adjustable pressure unloader valve
  • 50-ft. x 3⁄8-in. high pressure hose with quick connect
  • Direct drive crankshaft pump with ceramic pistons
  • Convenient handles with hose wrap and wand holder
  • Thermal relief valve to prevent the pump from overheating
  • 3 quick connect spray nozzles for a wide variety of cleaning tasks – 15°, 25° and detergent
  • Low pressure detergent injector to apply recommended detergents
  • 36-in. lance assembly with trigger gun

PR-3200GMA Aluminum Frame

3200 PSI, Gas
212cc John Deere branded OHV Engine

  • 2.7 gallons per minute flow rate
  • Adjustable pressure unloader valve
  • 50-ft. x 3⁄8-in. high pressure hose with quick connect
  • Direct drive crankshaft pump with ceramic pistons
  • Thermal relief valve to prevent the pump fromoverheating
  • Convenient handles with hose wrap and wand holder
  • 3 quick connect spray nozzles for a wide variety ofcleaning tasks – 15°, 25° and detergent
  • Low pressure detergent injector to apply recommended detergents
  • 36-in. lance assembly with trigger gun
  • Corrosion resistant powder coated aluminum frames
  • 50-ft. x 3⁄8-in. high pressure hose with quick connect
  • Patented vibration isolation plate with four rubber isolators 

PR-3200GHA Aluminum Frame

3200 PSI, Gas
196cc Honda GX Engine

  • 2.7 gallons per minute flow rate
  • Adjustable pressure unloader valve
  • 50-ft. x 3⁄8-in. high pressure hose with quick connect
  • Direct drive crankshaft pump with ceramic pistons
  • Convenient handles with hose wrap and wand holder
  • Thermal relief valve to prevent the pump from overheating
  • 3 quick connect spray nozzles for a wide variety of cleaning tasks – 15°, 25° and detergent
  • Low pressure detergent injector to apply recommended detergents
  • 36-in. lance assembly with trigger gun
  • Corrosion resistant powder coated aluminum frames
  • 50-ft. x 3⁄8-in. high pressure hose with quick connect
  • Patented vibration isolation plate with four rubber isolators

PR-3800GM

3800 PSI, Gas
300cc John Deere branded OHV Engine

  • 3.2 gallons per minute flow rate
  • Fixed unloader valve
  • 50-ft. x 3⁄8-in. high pressure hose with quick connect
  • Thermal relief valve to prevent the pump from overheating
  • Direct drive crankshaft pump with ceramic pistons
  • Convenient handles with hose wrap and wand holder
  • 3 quick connect spray nozzles for a wide variety of cleaning tasks – 15°, 25° and detergent
  • Low pressure detergent injector to apply recommended detergents
  • 36-in. lance assembly with trigger gun

PR-3800GH

3800 PSI, Gas
270cc Honda GX Engine

  • 3.2 gallons per minute flow rate
  • Fixed unloader valve
  • 50-ft. x 3⁄8-in. high pressure hose with quick connect
  • Direct drive crankshaft pump with ceramic pistons
  • Thermal relief valve to prevent the pump from overheating
  • Convenient handles with hose wrap and wand holder
  • 3 quick connect spray nozzles for a wide variety of cleaning tasks – 15°, 25° and detergent
  • Low pressure detergent injector to apply recommended detergents

PR-4200GM

4200 PSI, Gas
420cc John Deere branded OHV Engine

  • 4.0 gallons per minute flow rate
  • Fixed unloader valve
  • 50-ft. x 3⁄8-in. high pressure hose with quick connect
  • Direct drive crankshaft pump with ceramic pistons
  • Thermal relief valve to prevent the pump from overheating
  • Convenient handles with hose wrap and wand holder
  • 3 quick connect spray nozzles for a wide variety of cleaning tasks – 15°, 25° and detergent
  • Low pressure detergent injector to apply recommended detergents
  • 36-in. lance assembly with trigger gun

PR-4200GH

4200 PSI, Gas
389cc Honda GX Engine

  • 3.4 gallons per minute flow rate
  • Fixed unloader valve
  • 50-ft. x 3⁄8-in. high pressure hose with quick connect
  • Direct drive crankshaft pump with ceramic pistons
  • Thermal relief valve to prevent the pump from overheating
  • Convenient handles with hose wrap and wand holder
  • 3 quick connect spray nozzles for a wide variety of cleaning tasks – 15°, 25° and detergent
  • Low pressure detergent injector to apply recommended detergents
  • 36-in. lance assembly with trigger gun

PR-4200GMA Aluminum Frame

4200 PSI, Gas
420cc John Deere branded OHV Engine

  • 4.0 gallons per minute flow rate
  • Fixed unloader valve
  • 50-ft. x 3⁄8-in. high pressure hose with quick connect
  • Direct drive crankshaft pump with ceramic pistons
  • Thermal relief valve to prevent the pump from overheating
  • Convenient handles with hose wrap and wand holder
  • 3 quick connect spray nozzles for a wide variety of cleaning tasks – 15°, 25° and detergent
  • Low pressure detergent injector to apply recommended detergents
  • 36-in. lance assembly with trigger gun 
  • Corrosion resistant powder coated aluminum frames
  • 50-ft. x 3⁄8-in. high pressure hose with quick connect
  • Patented vibration isolation plate with four rubber isolators 

PR-4200GHA Aluminum Frame

4200 PSI,
Gas 389cc Honda GX Engine

  • 3.4 gallons per minute flow rate
  • Fixed unloader valve
  • 50-ft. x 3⁄8-in. high pressure hose with quick connect
  • Direct drive crankshaft pump with ceramic pistons
  • Thermal relief valve to prevent the pump from overheating
  • Convenient handles with hose wrap and wand holder
  • 3 quick connect spray nozzles for a wide variety of cleaning tasks – 15°, 25° and detergent
  • Low pressure detergent injector to apply recommended detergents
  • 36-in. lance assembly with trigger gun 
  • Corrosion resistant powder coated aluminum frames
  • 50-ft. x 3⁄8-in. high pressure hose with quick connect
  • Patented vibration isolation plate with four rubber isolators

HR Series / Gasoline

ImageProductDetails

HR-2620GHV

2600 PSI, Gas
160cc Honda GC Engine

  • 2.3 gallons per minute flow rate
  • 2 semi-pneumatic tires
  • 30-ft. x 1⁄4-in. high pressure hose with screw connect
  • Convenient fold-down handle with hose wrap and wand holder
  • Upright cart design for easy mobility
  • Self-contained detergent tank
  • 3 spray nozzles for a wide variety of cleaning tasks – 15°, 25° and detergent
  • Low pressure detergent injector to apply recommended detergents
  • 36-in. lance assembly with trigger gun

HR-2620GMV

2600 PSI, Gas
170cc John Deere branded OHV Engine

  • 2.3 gallons per minute flow rate
  • 2 semi-pneumatic tires
  • 30-ft. x 1⁄4-in. high pressure hose with screw connect
  • Convenient fold-down handle with hose wrap and wand holder
  • Upright cart design for easy mobility
  • Self-contained detergent tank
  • 3 spray nozzles for a wide variety of cleaning tasks – 15°, 25° and detergent
  • Low pressure detergent injector to apply recommended detergents
  • 36-in. lance assembly with trigger gun

HR-2520GH

2500 PSI, Gas
160cc Honda GC Engine

  • 2.8 gallons per minute flow rate
  • 2 semi-pneumatic tires
  • 25-ft. x 1⁄4-in. high pressure hose with screw connect
  • Convenient fold-down handle with hose wrap and wand holder
  • Self-contained detergent tank
  • 3 spray nozzles for a wide variety of cleaning tasks – 15°, 25° and detergent
  • Low pressure detergent injector to apply recommended detergents
  • 36-in. lance assembly with trigger gun

HR-2800GH

2800 PSI, Gas
187cc Honda GC Engine

  • 2.7 gallons per minute flow rate
  • 2 semi-pneumatic tires
  • 30-ft. x 1⁄4-in. high pressure hose with screw connect
  • Convenient fold-down handle with hose wrap and wand holder
  • Upright cart design for easy mobility
  • Self-contained detergent tank
  • 3 spray nozzles for a wide variety of cleaning tasks – 15°, 25° and detergent
  • Low pressure detergent injector to apply recommended detergents
  • 36-in. lance assembly with trigger gun

HR-2800GM

2800 PSI, Gas
212cc John Deere branded OHV Engine

  • 2.7 gallons per minute flow rate
  • 2 semi-pneumatic tires
  • 30-ft. x 1⁄4-in. high pressure hose with screw connect
  • Convenient fold-down handle with hose wrap and wand holder
  • Upright cart design for easy mobility
  • Self-contained detergent tank
  • 3 spray nozzles for a wide variety of cleaning tasks – 15°, 25° and detergent
  • Low pressure detergent injector to apply recommended detergents
  • 36-in. lance assembly with trigger gun

AC Series / Electric

ImageProductDetails

AC-1500E

1500 PSI, Electric Hand-Carry 2.0 HP, 120V Motor

  • 2.0 gallons per minute flow rate
  • Industrial electric motor, UL-listed
  • 25-ft. x 3⁄8-in. high pressure hose
  • Adjustable 0-65° spray pattern
  • Industrial-duty direct or belt drive crankshaft pump
  • Thermal relief valve to prevent the pump fromoverheating
  • Adjustable pressure unloader valve

AC-1500E-C

1500 PSI, Electric 2.0 HP, 120V Motor

  • 2.0 gallons per minute flow rate
  • Industrial electric motor, UL-listed
  • 25-ft. x 3⁄8-in. high pressure hose
  • Adjustable 0-65° spray pattern
  • Industrial-duty direct or belt drive crankshaft pump
  • Thermal relief valve to prevent the pump fromoverheating
  • Adjustable pressure unloader valve

AC-2500E

2500 PSI, Electric 6.0 HP, 230V Motor

  • 3.2 gallons per minute flow rate
  • Industrial electric motor, UL-listed
  • 25-ft. x 3⁄8-in. high pressure hose with quick connects
  • Quick connect nozzles – 15°, 25° and detergent
  • Industrial-duty direct or belt drive crankshaft pump
  • Thermal relief valve to prevent the pump from overheating
  • Adjustable pressure unloader valve

Agricultural/Commercial Series - Hot Water

ImageProductDetails

AC-1500EH

1500 PSI, Electric 2.0 HP, 120V Motor

  • 2.0 gallons per minute flow rate
  • Direct drive crankshaft pump
  • Quick connect nozzles – 0°, 15°, 25°, and 40°
  • Industrial electric motor, 35-ft. power cord with GFCI
  • Adjustable pressure unloader valve
  • High pressure detergent injector to apply recommended detergents
  • Energy efficient heat exchanger
  • Top-fired burner design for better fuel efficiency and easy troubleshooting and maintenance
  • High quality fuel filter/water separator ensures clean fuel supply
  • No. 1 or No. 2 diesel or kerosene fired burner
  • Coil drain to winterize and prevent freezing
  • 50-ft. x 3⁄8-in. steel wire-braided pressure hose
  • Adjustable pressure insulated dual lance and trigger gun
  • CSA listed

AC-2000EH

2000 PSI, Electric 4.0 HP, 230V Motor

  • 2.8 gallons per minute flow rate
  • Direct drive crankshaft pump
  • Quick connect nozzles – 0°, 15°, 25°, and 40°
  • Industrial electric motor, 35-ft. power cord with GFCI
  • Adjustable pressure unloader valve
  • High pressure detergent injector to apply recommended detergents
  • Energy efficient heat exchange
  • Top-fired burner design for better fuel efficiency and easy troubleshooting and maintenance
  • High quality fuel filter/water separator ensures clean fuel supply
  • No. 1 or No. 2 diesel or kerosene fired burner
  • Coil drain to winterize and prevent freezing
  • 50-ft. x 3⁄8-in. steel wire-braided pressure hose
  • Adjustable pressure insulated dual lance and trigger gun
  • CSA listed

AC-3000EH

3000 PSI, Electric 8.0 HP, 230V Motor

  • 3.5 gallons per minute flow rate
  • Belt drive crankshaft pump
  • 15° fixed nozzle
  • Industrial electric motor, 35-ft. power cord with GFCI
  • Adjustable pressure unloader valve
  • High pressure detergent injector to apply recommended detergents
  • Energy efficient heat exchanger
  • Top-fired burner design for better fuel efficiency and easy troubleshooting and maintenance
  • High quality fuel filter/water separator ensures clean fuel supply
  • No. 1 or No. 2 diesel or kerosene fired burner
  • Coil drain to winterize and prevent freezing
  • 50-ft. x 3⁄8-in. steel wire-braided pressure hose
  • Adjustable pressure insulated dual lance and trigger gun
  • CSA listed

GatorPal™ / Gasoline

ImageProductDetails

GP-3000GH

3000 PSI, Gas 270cc Honda GX Engine

  • 3.0 gallons per minute flow rate
  • 65-gallon water tank for Gator™ models with higher load capacities^
  • Thermal relief valve to prevent the pump from overheating
  • 100-ft. x 3⁄8-in. non-marking hose with quick connect, swivel and bend restrictors and hose reel
  • 36-in. lance with rubber grip and professional-grade insulated trigger gun with safety lock-off
  • Quick connect nozzles – 0°, 15°, 25°, and 40°

Pressure Washer Accessories

SANDBLASTER

Model/Part NumberItemFits Model

AW-3000-0000

Wet Sandblaster Attachment

EXTENSION HOSES

Model/Part NumberItemFits Model

AWJ-0851-0338

Extension Hose 3/8” x 50’

All PR & AC Models

 

AWJ-0851-0341

Extension Hose 3/8” x 23’

HR-1400E,
PR-3000GH,
AC-1500 E/C,
AC-2700GH,
AC-2500GH

AWJ-0850-0199

Extension Hose 3/8” x 50’

AC Series hot water models

DETERGENT INJECTORS

Model/Part NumberItemFits Model

AWJ-8400-0021

Low Pressure

AWJ-0050-0161

High Pressure, 65-degree chemical injector

All models except
HR-1400E,
HR-2420GH,
AC-1500E/C

AWJ-0018-0148

nozzle

Replacement tip for
AWJ-8400-0021

ROTATING NOZZLES

Model/Part NumberItemFits Model

AWJ-7300-0003

Rotating Nozzle with Quick Connect, 3.0 orifice

HR-2520GH,
HR-2800GH,
HR-2800GM
PR-3200GH
PR-3200GM
AC-2700GH

AWJ-7300-0035

Rotating Nozzle with Quick Connect, 3.0 orifice

AWJ-7300-0035

AWJ-0018-0369

Rotating Nozzle with Lance, 1.2mm

HR-1400E
AC-1500E/C

QUICK CONNECT NOZZLES

Model/Part NumberItemFits Model

AWJ-4027-0000

4-pack nozzles, 0,15, 25 & 40-degrees, 2.7 orifice

HR-2620GHV
HR-2620-GMV

AWJ-4003-0000

4-pack nozzles, 0,15, 25 & 40-degrees, 3.0 orifice

CC-3200GH
PR-3200GH/GM
AC-2700GH

AWJ-4033-0000

4-pack nozzles, 0,15, 25 & 40-degrees, 3.3 orifice

HR-2800GH/GM
PR-3800GH/GM

AWJ-4035-0000

4-pack nozzles, 0,15, 25 & 40-degrees, 3.5 orifice

AC-3300GH

AWJ-4037-0000

4-pack nozzles, 0,15, 25 & 40-degrees, 3.7 orifice

CC-4200GH
HR-2520GH
PR-4200GH/GM

AWJ-4004-0000

4-pack nozzles, 0,15, 25 & 40-degrees, 4.0 orifice

AC-2500E
AC-3500GH

AWJ-4055-0000

4-pack nozzles, 0,15, 25 & 40-degrees, 5.5 orifice

AC-2500GH

AWJ-0018-0302

0 Degree Q/C Nozzle, 3.0 orifice

HR-2510GH,
HR-2710GH,
PR-3000GH/GS,
AC-2700GH/GS

AWJ-0018-0150

15 Degree Q/C Nozzle, 3.0 orifice

HR-2510GH,
HR-2710GH,
PR-3000GH/GS,
AC-2700GH/GS

AWJ-0018-0304

40 Degree Q/C Nozzle, 3.0 orifice

HR-2510GH,
HR-2710GH,
PR-3000GH/GS,
AC-2700GH/GS

AWJ-0018-0257

0 Degree Q/C Nozzle, 3.5 orifice

PR-3400GH/GS,
PR-4000GH/GS,
AC-3000GS,
AC-3300GH

AWJ-0018-0258

15 Degree Q/C Nozzle, 3.5 orifice

PR-3400GH/GS,
PR-4000GH/GS,
AC-3000GS,
AC-3300GH

AWJ-0018-0259

25 Degree Q/C Nozzle, 3.5 orifice

PR-3400GH/GS,
PR-4000GH/GS,
AC-3000GS,
AC-3300GH

AWJ-0018-0260

40 Degree Q/C Nozzle, 3.5 orifice

PR-3400GH/GS,
PR-4000GH/GS,
AC-3000GS,
AC-3300GH

AWJ-4300-0000

4-pack nozzles, 0, 15, 25 & 40-degrees, 3.0 orifice

HR-2510GH,
HR-2710GH,
PR-3000GH/GS,
AC-2700GH/GS

AWJ-4035-0000

4-pack nozzles, 0, 15, 25 & 40-degrees, 3.5 orifice

PR-3400GH/GS,
PR-4000GH/GS,
AC-3000GS,
AC-3300GH

AWJ-4004-0000

4-pack nozzles, 0, 15, 25 & 40-degrees, 4.0 orifice

AC-2500E,
AC-3500GH

AWJ-4055-0000

4-pack nozzles, 0, 15, 25 & 40-degrees, 5.5 orifice

AC-2500GH

HOSE REEL

Model/Part NameItemFits Model

50-0195

13-in Hose Reel, 150-ft max
hose length

WANDS AND POWER BROOM

Model/Part NumberItemFits Model

AWJ-0016-0443

Lance with variable nozzle

HR-1400E &
HR-2420GH

AWJ-0016-0418

36" Lance with handle

AC-2500E,
AC-3500GH

AWJ-0016-0366

1/4" Lance with quick connect nozzle

HR-2510GH,
HR-2710GH,
AC1500E/C,
PR Series,
AC-2700GH/GS,
AC-3000GS,
AC-3500GH

AWJ-7012-2503

14" power broom, 3000 PSI max

TRIGGER GUNS

Model/Part NumberItemFits Model

AWJ-0016-0001

Trigger gun up to 4000-PSI

AC Series

AWJ-0016-0441

Gun & wand up to 4000-PSI, 3/8-NPT

PR Series

AWJ-0016-0442

Gun & wand up to 4000-PSI, 1/4-in BSP-M

HR Series

DETERGENTS

Model/Part NumberItemFits Model

AWJ-4018-JD01

All Purpose Cleaner-4 gal/case

All Models

AWJ-4034-JD01

Surface Preparation-4 gal/case

All Models

Surface Preparation-4 gal/case

All Models

QUICK CONNECT PLUGS & SOCKETS

Model/Part NumberItemFits Model

AWJ-0017-0001

1/4F x 1/4 Socket

AWJ-0017-0002

1/4M x 1/4 Plug

AWJ-0017-0004

3/8F x 1/4 Socket

AWJ-0017-0005

3/8M x 3/8 Plug

AWJ-0017-0006

3/8F x 3/8 Plug

AWJ-0017-0007

3/8F x 3/8 Socket

AWJ-0017-0017

1/4F x 1/4 Plug

AWJ-0017-0028

1/4M x 1/4 Socket

AWJ-0017-0029

1/2M x 3/8 Socket

90-day warranty is offered on Sandblaster, Extension Hoses, Detergent Injectors, Extension Wands, Rotating Brushes, Rotating Nozzles, Quick Connect Nozzles, Detergents, and Hose Reel.

John Deere's Semi-trash pumps feature a self-priming pump with a durable cast iron volute and impeller allowing you to pump dirty water with gravel or trash up to 3/4-inch. These pumps are suitable for civil engineering, construction and agricultural applications.

John Deere's Chemical/Liquid Transfer pumps feature a high performance self-priming pump with polypropylene housing suitable for corrosive environments. These pumps are ideal for liquid fertilizer and chemical transfer.

2-inch

ImageProductDetails

PR-FP2GM

212cc John Deere branded OHV Engine

  • 2-in. Suction/Discharge Size
  • 200 max. GPM @ 58 max. PSI
  • Nylon propellers with stainless-steel inserts can handle solid particles in suspension up to 3⁄8-in. diameter

PR-FP2GH

196cc Honda GX Engine

  • 2-in. Suction/Discharge Size
  • 200 max. GPM @ 58 max. PSI
  • Nylon propellers with stainless-steel inserts can handle solid particles in suspension up to 3⁄8-in. diameter

3-inch

ImageProductDetails

PR-SP3GM1

 

212cc John Deere branded OHV Engine

  • 3-in. Suction/Discharge Size
  • 45 PSI
  • 16,560 GPH max. Capacity
  • 104-ft. maximum total head

AC-SP3GH1

196cc Honda GX Engine

  • 3-in. Suction/Discharge Size
  • 45 PSI
  • 16,560 GPH max. Capacity
  • 104-ft. maximum total head

Water Pumps Accessories

SUCTION & DISCHARGE HOSE KITS

Model/Part NumberItem

2 x 20' green PVC suction hose assembly
2 x 50' blue PVC discharge hose assembly
steel strainer with round openings

Fits models AC-CP2GH, AC-CP2GS, AC-SP2GH & AC-SP2GS

70-0524

3 x 20' green PVC suction hose assembly
3 x 50' blue PVC discharge hose assembly
steel strainer with round openings     

Fits models AC-CP3GH, AC-CP3GS, AC-SP3GH & AC-SP3GS

70-0525

Tough dirt and spills require equally tough clean up. John Deere wet/dry vacuums feature self-cooling motors that won't burn up, a lifetime warranty on canisters, and professional grade power.

Wet/Dry Vacuums

ImageProductDetails

PR-7

7-Gallon

  • 1.34 HP, 120V Two-stage Bypass Motor
  • 127 CFM
  • 84-in. waterlift
  • Exhaust blower feature
  • Filter efficiency 99.5% to 1.0-micron

PR-12

12-Gallon

  • 1.34 HP, 120V Two-stage Bypass Motor
  • 135 CFM
  • 92-in. waterlift
  • Filter efficiency 99.5% to 1.0-micron

AC-9

9-Gallon

  • 1.3 HP, 120V Two-stage Bypass Motor
  • 101 CFM
  • 87-in. waterlift
  • Industrial-grade caster wheels with plates

AC-13

13-Gallon

  • 1.6 HP, 120V Two-stage Bypass Motor
  • 108 CFM
  • 111-in. waterlift
  • Industrial-grade polyolefin wheels with stainless-steel shafts
  • Filter efficiency 99.5% to 1.0-micron

AC-18

18-Gallon

  • 1.6 HP, 120V Two-stage Bypass Motor
  • 108 CFM
  • 111-in. waterlift
  • Industrial-grade polyolefin wheels with stainless-steel shafts
  • Filter efficiency 99.5% to 1.0-micron

Wet/Dry Vacuum Accessories

9 Gallon Vacuum Accessories

ItemModel/Part Number

Hose Fitting - Inlet Cuff

50-0178

Curved Plastic Wand, 14-1/4” length

16-0403

Aluminum/plastic Extension Wand, 2-piece

16-0402

Cartridge Filter

19-0221

Disposable Paper Filter Bag (Pack of 5)

19-0222

Commercial Squeegee Tool, 12” width

33-0410

Combination Floor Tool, 12” width

33-0411

Crevice Tool, 8-1/2” length

33-0412

Dusting Brush, 2-1/2” width

33-0422

13 & 18 Gallon Vacuum Accessories

ItemModel/Part Number

Suction Hose - 1-1/2" x 10'

15-0207

Suction Hose (Bulk) - 1-1/2”

15-0223

Hose Fitting - Tapered Cuff End

50-0167

Hose Fitting - Inlet Fitting

50-0169

Hose Fitting - Hose Connector

50-0168

Hose Connection Kit(Connects bulk hose to vacuum or to standard hose- includes 2 inlet fittings &1hose connector)

852-0156

2-Piece Aluminum Extension Wand

16-0391

Cartridge Filter w/fitting (c/f before ordering)

19-0230

Disposable Paper Filter Bag (Pack of 10)

19-0610

Reusable Cloth Filter Bag

19-0611

HEPA Filter

19-0234

Filter Liner

19-0235

Crevice Tool, 10-3/4” length

33-0326

Dusting Tool, 2-1/2” nylon brush

33-0327

Upholstery Tool, 5” width

33-0328

Commercial Squeegee Floor Tool, 14” width

33-0359

Combination Floor Tool, 11-3/4” width

33-0360

Commercial Nylon Brush Floor Tool, 14” width

33-0361

Power Floor Tool, 10-1/2” width

33-0362

Suction Hand Tool, 4” width

33-0371

Vacuum Accessory Bag

AW-9500-0001

90 days warranty is offered for 9 Gallon Vacuum Accessories, 13 & 18 Gallon Vacuum Accessories.

 

Find a Dealer