370BBackhoe
- Stabilizers, boom and swing locks accessible from the operator’s seat
- Large, easy-access step and hand brace
- Upgraded valve provides smooth hydraulics for precise control
- Available field-install thumb option
Features
Expand All
Collapse All
Comfortable operation of the 370B Backhoe
Easy operation with the 370B Backhoe
Backhoe and tractor connection
Backhoe mounted to a tractor
370B Backhoe mounting frame
Removing the 370B Backhoe
Wide-stance stabilizers
Rubber stabilizer pads
Operator comfort
Comfortable operation of the 370B Backhoe
The operator station on the 370B Backhoe has been designed for improved operator comfort.
- A strong 3-point stance can be maintained when mounting and dismounting the backhoe using the backhoe frame-mounted grab handle, the console grab handle, and the large boarding step mounted to the stabilizer arm
- Boom and swing locks are accessible from the operator’s seat and have a built-in storage location when the backhoe is in use
- High-back seat provides more operator comfort during longer work hours
- Operator platform with non-slip grips are provided
Convenient and easy operation
Easy operation with the 370B Backhoe
There are several features that make the 370B Backhoe convenient and easy to operate.
- Seat pivots up when not in use to prevent damage during transport. This feature also keeps debris from collecting on the seat
- Low-profile console allows an unobstructed view of the working area
- Two-lever control is used for boom lift, swing, dipper stick, and bucket
- Streamlined control valve and console provides better visibility to the digging area
- User-friendly, two-lever control is used for boom lift, swing dipper stick, and bucket
- Cushioned boom cylinder provides smooth operation and prevents abrupt contact with the backhoe frame when raising the boom
Improved attachability
Backhoe and tractor connection
Backhoe mounted to a tractor
The 370B Backhoe offers improved attachability by allowing the rear 3-point hitch draft arms to remain on the tractor. Due to a clear instructional decal and improved tolerance, attaching the 370B Backhoe has never been easier.
Backhoe installation and removal
370B Backhoe mounting frame
The backhoe's mainframe fits into rear mounting brackets installed on the tractor. This provides the following important features:
- Vertical or side-to-side movement is virtually eliminated, providing more stability. The design of the mainframe also positions the entire backhoe close to the tractor. Operators are also able to benefit from the total weight transfer between the backhoe stabilizers and loader bucket.
- The tractor chassis is protected because the mainframe integrates the tractor and backhoe combination together as one.
- Once the mounting frame is installed, attaching and detaching is quick and easy.
Installation
- Remove the top link from tractor
- Raise the rockshaft and install the rockshaft storage weldment
- Lift the seat up to clear the tractor
- Back the tractor to within 20.3 cm (8 in.) of the backhoe
- Set the parking brake and shut off the tractor
- Verify that the swing lock pin is installed; if not, install it
- Connect the power beyond system to the backhoe
- Start the tractor and set the engine to low idle
- Lower stabilizers to raise the backhoe until the lower shaft is above the hooks
- Back the tractor up until the lower shaft contacts the tractor frame
- Lower stabilizers until the lower shaft rests in the hooks
- Remove the boom pin
- Lower the boom until the upper pin holes align
- Install both upper install pins and drop the pin handle into the retaining slot
- Raise the boom and install the boom lock
- Raise stabilizers up until they lock
NOTE: Review the operator’s manual for detailed procedures. Detailed instructions are also located on the rear of the control panel.
Removal
Removing the 370B Backhoe
- Set the parking brake and set the engine to low idle
- Install the swing lock pin
- Lift the backhoe seat up to clear the tractor
- Without raising the tractor, lower stabilizers to touch the ground
- Lower the boom while keeping the dipper vertical
- Rest the bucket flat on the ground with teeth facing the tractor as shown
- Continue to extend the boom to lightly remove pressure from the upper install pins
- Remove the upper install pins
- Use the boom and stabilizers to lift the backhoe off of the tractor
- Move the tractor ahead 20.3 cm (8 in.)
- Completely raise the boom and install the boom lock pin
- Raise stabilizers up until they lock
- Shut off the tractor
- Disconnect the backhoe hydraulics from the tractor
- Reconnect the tractor power beyond loop
- Remove the rockshaft storage weldment
- Install the 3-point top link
NOTE: Review the operator’s manual for detailed procedures. Detailed instructions are also located on the rear of the control panel.
Serviceability
- Replaceable bushings are available for the swing, dipper, boom, and bucket pivots
- Replaceable bucket teeth are available
Wide-stance stabilizers
Optional rubber street pads
Rubber stabilizer pads
Rubber stabilizer pads are available as an attachment. The pads are popular when operating the backhoe on hard surfaces.
- Rubber stabilizer pads keep scratching and damage to ground surfaces minimal
Specs & Compare
Add Model
| Specs & Compare | ||||
|---|---|---|---|---|
| Select up to 4 models to compare specifications | John Deere 370B Backhoe |
Key Specs
| Digging depth | 2.08 m 6 ft, 10 in. |
|||
|---|---|---|---|---|
| SAE dipperstick digging force | 7015 N 1577 lbf |
|||
| SAE bucket digging force | 11,975 N 2692 lbf |
|||
| Swing arc | 148 degree (angle) | |||
| Boom lift capacity | 137 kg 302 lb |
|||
| Transport height | 2 m 6 ft, 7 in. |
|||
| Stabilizers spread width, up | 1.17 m 4 ft, 0.25 in. |
|||
| Stabilizers spread width, down | 1.9 m 6 ft, 2 in. |
|||
| Bucket widths | 20.3 cm (8 in.) 30.5 cm (12 in.) 40.6 cm (16 in.) |
|||
| Total weight |
Backhoe
| Swing arc | 148 degree (angle) | |||
|---|---|---|---|---|
| Bucket rotation | 176 degree (angle) | |||
| Boom lift capacity | 137 kg 302 lb |
|||
| SAE dipperstick digging force | 7015 N 1577 lbf |
|||
| SAE bucket digging force | 11,975 N 2692 lbf |
|||
| Angle of departure | ||||
| Hydraulic relief setting | ||||
| Bucket control main relief valve pressure | 172.4 bar 2500 psi |
Dimensions
| Digging depth | 2.08 m 6 ft, 10 in. |
|||
|---|---|---|---|---|
| Loading height (bucket at 60 degrees) | 1.8 m 5 ft, 10.5 in. |
|||
| Reach from center line of swing pivot | 3 m 9 ft, 9 in. |
|||
| Transport height | 2 m 6 ft, 7 in. |
|||
| Loading reach (bucket at 60 degrees) | 1.17 m 3 ft, 10 in. |
|||
| Transport overhang | 1.1 m 3 ft, 6 in. |
|||
| Undercut | 43 cm 17 in. |
|||
| Stabilizer type | Stabilizers spread width, up 1.17 m 4 ft, 0.25 in. Stabilizers spread width, down 1.9 m 6 ft, 2 in. |
Weight
| Total | ||||
|---|---|---|---|---|
| With RSA side plate kit and 20-in. bucket | ||||
| With frame adapter and 24-in. bucket | ||||
| With medium frame adapter and 24-in. bucket | ||||
| With large frame adapter and 24-in. bucket | ||||
| With 0.4-m (16-in.) bucket | 350 kg 773 lb |
Bucket
| Bucket widths | SAE struck capacity 20.3 cm (8 in.) - 0.012 m3 - 0.42 cu ft cu ft 30.5 cm (12 in.) - 0.019 m3 - 0.66 cu ft 40.6 cm (16 in.) - 0.25 m3 - 0.9 cu ft Heaped capacity 20.3 cm (8 in.) - 0.013 m3 - 0.46 cu ft 30.5 cm (12 in.) - 0.022 m3 - 0.76 cu ft 40.6 cm (16 in.) - 0.03 m3 - 1.06 cu ft Shipping weight 20.3 cm (8 in.) - 40 lb (18.1 kg) 30.5 cm (12 in.) - 50 lb (22.7 kg) 40.6 cm (16 in.) - 60 lb (27.2 kg) 20.3 cm (8 in.) 30.5 cm (12 in.) 40.6 cm (16 in.) |
|---|
Additional information
| Date collected |
|---|
Shop and Buy
Maintenance and Support
You May Also Be Interested In
Images of equipment models may be digitally generated, are for illustration purposes only, and are subject to change. Equipment models shown are typically base models and may not reflect all features, options, or attachments. Equipment availability may be limited. See your John Deere dealer for additional information.