- Home & Workshop Products
Our IT4/EU Stage IIIB engines employ cooled exhaust gas recirculation (EGR) for reducing NOX, and a diesel particulate filter and diesel oxidation catalyst to reduce particulate matter.
Quad-Cool design isolates coolers from engine heat for increased efficiency and durability, and keeps them well protected behind the heavy-duty grille and fan.
Hydraulic-driven variable-speed fan runs only as needed, reducing noise and fuel consumption.
Separate, sealed hydraulic and hydrostatic systems with common fluid and filter codes eliminate cross contamination.
In-cylinder sensors enable better control and help speed cycles in repetitive applications.
Counter-rotating tracks and variable speed control increases productivity.
Choose joystick, multiple-lever hydraulic controls, or V-pattern transmission lever.
Large service doors open wide, and same-side daily checkpoints are conveniently grouped for ground-level access.
Operator station tilts a full 53 degrees in minutes, for wide-open component access.
Total Machine Control (TMC) allows you to customize operating characteristics and response, for superb, one-of-a-kind control. TMC can also be used to monitor machine readings such as mileage and hours.
Heavy-duty sealed and lubed undercarriage is standard, with SC-2 extended-life optional.
Specs & Compare
|Select up to 4 models to compare specifications||
|Engine Manufacturer||John Deere|
|Engine Model||PowerTech PVX 6068|
|Emission Rating||Interim Tier 4|
|Displacement, ltr (Inches�)||6.8 (414)|
|Rated Speed, rpm||1800|
|Engine Output - Net, kW (hp)||142 (190)|
|Final drive type||In-line Drive Motor|
|Track rollers per side - std||6|
|Track shoe pitch, mm (inches)||203 (8)|
|Track shoe width, mm (inches)||560 (22)|
|Ground Contact Area, cm� (Inches�)||28985 (4493)|
|Track shoes per side - std||38|
|Overall length, mm (ft/in)||6824 (16 ft 5 in)|
|Max. height, mm (ft/in)||3330 (10 ft 11 in)|
|Track length on ground, mm (inches)||2588 (102)|
|Ground clearance, mm (inches)||432 (17)|
|Track gauge - standard, mm (ft/in)||1880 (6 ft 2 in)|
|Shovel 1 width, mm (ft/in)||2591 (8 ft 6 in)|
|Shovel 1 dump height 45� max, mm (ft/in)||2950 (9 ft 8 in)|
|Bucket pin height, mm (ft/in)||4080 (13 ft 5 in)|
|Bucket reach - max, mm (ft/in)||1100 (3 ft 7 in)|
|Digging depth, mm (inches)||167 (6.6)|
|Steering clutches and brakes||Yes - Hydrostatic|
|Fuel tank capacity, ltr (gallons (US))||326 (86)|
|Implement hydraulic tank, ltr (gallons (US))||121 (32)|
|Shovel 1 capacity, m� (yd�)||2.5 (3.2)|
|Ground bearing pressure - standard, kPa (PSI)||76.5 (11.1) - GP Bucket|
|Static tipping load shovel 1, kg (lbs)||15362 (33867)|
|Breakout force - max, kN (lbf)||197 (44300)|
|Alternator output, Amp||100|
|Pump type||Piston Pump - Load Sensed|
|Pump flow, lt/min (gallons (US) / min)||246 (65)|
|Relief pressure, kPa (PSI)||26028 (3775)|
|Operating weight std, kg (lbs)||20492 (45178)|
Features and specifications are based on published information at the time of publication. Features and specifications are subject to change without notice.