Less Downtime. Less Cost. Less Worry.

Less is more when you purchase John Deere Protect for select new machines and equipment. Our flexible extended service plans help you increase uptime, stabilize operating costs, and maintain original performance. But the value of John Deere Protect doesn't end there. It also provides timely inspections and maintenance, unmatched technical expertise and support, and discounted Genuine John Deere parts.

Available through your local John Deere dealer.

.

Self-propelled sprayer with extended boom operating in a field at dusk, headlights illuminated.

MAINTENANCE PLAN

    Available for the following equipment:
  • S Series Combines
  • S Series Front-End Equipment
  • X Series Combines
  • X Series Front-End Equipment
  • 5E/5M Series Utility Tractors
  • 400R/600R Series Sprayers
    What's included?
  • 3 Annual Expert Inspections
  • 3 to 7 Maintenance Events
  • Genuine John Deere Parts
  • 10% Parts Discount
  • Transferable To A New Owner
Large tracked tractor pulling tillage equipment across a field at night with work lights on.

MAINTENANCE PLUS PLAN

    Available for the following equipment:
  • 6M Series Utility/Row Crop Tractors
  • 6R Series Utility/Row Crop Tractors
  • 7 Series Tractors
  • 8 Series Row Crop Tractors
  • 9 Series Row Crop Tractors
    What's included?
  • 3 to 5 Annual Expert Inspections
  • 2 to 10 Scheduled Maintenance Events
  • 24-hour Uptime Assurance v
  • Genuine John Deere Parts
  • 10% Parts Discount
  • Transferable To A New Owner
Green combine harvesting wheat in a field at sunset, leaving a trail of dust.

MAINTENANCE PLUS WEAR PLAN

    Available for the following equipment:
  • S Series Combines
  • X Series Combines
    What's included?
  • 3 Annual Expert Inspections
  • 3 Scheduled Maintenance Events
  • 24-hour Uptime Assurance
  • Wear Parts Replacement Coverage
  • Genuine John Deere Parts
  • 10% Parts Discount
  • Transferable To A New Owner

Frequently Asked Questions

 

Why must a PowerGard™ Protection Plan be purchased along with a John Deere Protect Plan?¹

Because the two plans complement each other to provide the best coverage and service for your machine.

1Minimum PowerGard coverage must be equal to or greater than the months/hours of the John Deere Protect Plan purchased. Longer PowerGard plans can be purchased if desired.

Green and gold shield-shaped badge with text reading Protect Maintenance Plus Wear.

What does an end-of-season expert inspection entail?

A dealer technician from your local John Deere dealer evaluates all critical areas of your machine through a multi-point inspection process. By identifying and addressing potential problems, you can avoid many downtime situations for the upcoming season.

Person inside tractor cab using a laptop and touchscreen monitor for equipment diagnostics.

What are maintenance events?

During a maintenance event, a dealer technician from your local John Deere dealer performs all recommended preventative maintenance at required hour intervals. This helps ensure your machine is properly maintained as recommended in your Operator's Manual.

Person installing a large cylindrical air filter into the engine compartment of a green tractor.

Why are Genuine John Deere parts and fluids important?

Genuine John Deere parts and fluids are manufactured specifically for John Deere equipment. As a result, you are always getting the very best for your machine. Plus, a built-in 10% discount is included.

Three fluid containers labeled Cool-Gard II, Plus-50 II, and Hy-Gard on a wooden pallet.

What is 24-hour uptime assurance?

Uptime assurance enables you to keep running if your machine can't be repaired within 24 hours. Subject to availability, a rental machine is provided while yours is under repair. To qualify, every expert inspection and maintenance event (and all the suggested adjustments and repairs) must be completed by your John Deere dealer.

Green combine harvesting corn in a field, leaving dust behind under a clear sky.

Is the remainder of a John Deere Protect plan fully transferable to the next machine owner?

Yes. The remaining John Deere Protect coverage stays intact and travels with the machine when sold to a different customer.

Two people shaking hands in front of a green combine harvester in a field.

John Deere Protect Maintenance Schedules

Expand AllCollapse All

X and S Series Combines

X and S Series Combines

View Downloadable PDF

Now that you've purchased a brand-new John Deere X or S Series Combine, it's time to keep it in tip-top shape with John Deere Protect™ Maintenance Plan.

When purchased alongside the PowerGard™ Protection Plan1, the John Deere Protect Maintenance and Maintenance Plus Wear Plans make it easier than ever to preserve the original performance of your equipment with coverage options for the first 36 months or 1,000/1,250/1,500 hours.

By bundling together annual inspections, scheduled maintenance, uptime assurance, and wear parts replacement coverage, you can confidently control your out-of-pocket expenses while optimizing the uptime of your X or S Series Combine, all with no deductible2 and no additional charges.

Secure your annual maintenance costs3 at today's prices and be in a better position to prevent downtime with John Deere Protect.

MAINTENANCE

The John Deere Protect Maintenance Plan4 includes:

  • Three Annual Expert Inspections
  • Three Scheduled Maintenance Events

MAINTENANCE PLUS WEAR

The John Deere Protect Maintenance Plus Wear Plan4 includes:

  • Three Annual Expert Inspections
  • Three Scheduled Maintenance Events
  • 24-hour Uptime Assurance
  • Wear Parts Replacement Coverage

Minimum PowerGard coverage must be equal to or greater than the months/hours of the John Deere Protect Plan purchased. Longer PowerGard plans can be purchased if desired.

The valuable coverage offered through John Deere Protect ensures you'll keep your operating expenses in check while helping you maintain the performance and reliability of your X or S Series Combine.

Expert Inspections:

Three end-of-season expert inspections ensure your X or S Series Combine is ready to run for next season's harvest. Through a 250-plus point inspection process, an expert technician from a participating John Deere dealer will evaluate all the critical areas of your combine and identify any problems to help you avoid costly, unplanned downtime.

Maintenance Events6:

To make sure your X or S Series Combine is properly maintained for upcoming harvests, the John Deere Protect Maintenance and Maintenance Plus Wear Plans include three end-of-season preventative maintenance events. Expert technicians from a participating John Deere dealer will perform all the maintenance and only use genuine John Deere parts and fluids. See the chart for maintenance schedule details. In-season maintenance is not covered.

24-Hour Uptime Assurance:

John Deere Protect Uptime Assurance enables you to keep harvesting if your X or S Series Combine is sidelined and cannot be repaired within 24 hours. Subject to machine availability, a rental machine will be provided while yours is being repaired. To qualify, every expert inspection and maintenance event (and all the suggested adjustments and repairs) must be completed by a participating John Deere dealer.

Wear Parts Replacement Coverage5:

John Deere Protect wear parts replacement coverage helps you control your out-of-pocket expenses by covering the cost of routine adjustments and replacements of wear parts not covered under the factory warranty or PowerGard Protection Plan. Based on the results of your Expert Inspections, a technician from a participating John Deere dealer will adjust or replace any wear parts that are not expected to last through the next harvest season at no additional charge to you.

 

John Deere Protect Maintenance Schedule:

S Series Combines

Break-In Maintenance:

  • Replace Final Drive Oil
  • Replace Main Engine Gearcase / Rotor Lube Filter
  • Replace Transmission Filter
  • Replace Transmission Return Filter

Year 1:

  • Grease All Separator and Chassis Grease Fittings
  • Replace Cab Recirculating Filter
  • Replace Cab Fresh Air Filter
  • Replace Engine Oil and Filter
  • Replace Primary and Secondary Engine Air Filter Elements
  • Replace Primary and Secondary Fuel Filters

Year 2:

  • Grease All Separator and Chassis Grease Fittings
  • Replace Cab Recirculating Filter
  • Replace Cab Fresh Air Filter
  • Replace Engine Oil and Filter
  • Replace Primary and Secondary Engine Air Filter Elements
  • Replace Primary and Secondary Fuel Filters

Year 3:

  • Grease All Separator and Chassis Grease Fittings
  • Replace Cab Recirculating Filter
  • Replace Cab Fresh Air Filter
  • Replace Engine Oil and Filter
  • Replace Primary and Secondary Engine Air Filter Elements
  • Replace Primary and Secondary Fuel Filters
  • Replace Diesel Exhaust Fluid (Def) Dosing Unit Filter
  • Replace Diesel Exhaust Fluid (Def) In-Line Filter
  • Replace Hydrostatic Charge Filter
  • Replace Hydrostatic Cooler Return Filter
  • Replace Auxiliary Hydraulic Return Filter

X Series Combines

Break-In Maintenance:

  • Replace Main Engine Gearcase / Pro Drive Lube Filter

Year 1:

  • Grease All Separator and Chassis Grease Fittings
  • Replace Cab Recirculating Filter
  • Replace Cab Fresh Air Filter
  • Replace Main Engine Gearcase / Pro Drive Lube Filter
  • Replace Engine Oil and Filter
  • Replace Primary and Secondary Engine Air Filter Elements
  • Check / Clean Fuel Pre-Cleaner Filter
  • Replace Hydraulic / Hydrostatic Filter (S760/S770)

Year 2:

  • Grease All Separator and Chassis Grease Fittings
  • Replace Cab Recirculating Filter
  • Replace Cab Fresh Air Filter
  • Replace Main Engine Gearcase / Pro Drive Lube Filter
  • Replace Engine Oil and Filter
  • Replace Primary and Secondary Engine Air Filter Elements
  • Check / Clean Fuel Pre-Cleaner Filter
  • Replace Fuel Tank Breather
  • Replace Diesel Exhaust Fluid (Def) Tank Breather
  • Replace Primary and Secondary Fuel Filters
  • Replace Hydrostatic Charge Filter
  • Replace Hydraulic / Hydrostatic Filter (S760/S770)

Year 3:

  • Grease All Separator and Chassis Grease Fittings
  • Replace Cab Recirculating Filter
  • Replace Cab Fresh Air Filter
  • Replace Main Engine Gearcase / Pro Drive Lube Filter
  • Replace Engine Oil and Filter
  • Replace Primary and Secondary Engine Air Filter Elements
  • Check / Clean Fuel Pre-Cleaner Filter
  • Replace Fuel Tank Breather
  • Replace Diesel Exhaust Fluid (Def) Tank Breather
  • Replace Primary and Secondary Fuel Filters
  • Replace Diesel Exhaust Fluid (Def) Dosing Unit Filter
  • Replace Diesel Exhaust Fluid (Def) In-Line Filter
  • Replace Hydrostatic Charge Filter
  • Replace Hydraulic / Hydrostatic Filter (S760/S770)
  • Replace Hydraulic Reservoir Filter (S780/S790)

To learn more about the benefits of John Deere Protect, contact a participating John Deere dealer.

1PowerGard Protection Plan with minimum terms equal to or greater than the months/hours of the desired John Deere Protect Plan must be purchased separately to be eligible for John Deere Protect extended service plans. Additional details are included in the selling description of each plan.

2PowerGard deductible applies to any failures under PowerGard coverage.

3Plan excludes diesel fuel and diesel exhaust fluid (DEF).

4For complete plan details, contact a participating John Deere dealer near you.

5Applies to Maintenance Plus Wear Plan only.

X and S Series Front-End Equipment

X and S Series Front-End Equipment

View Downloadable PDF

Now that you've purchased brand-new front-end equipment for your X or S Series combine, it's time to keep it in tip-top shape with John Deere Protect™ Maintenance.

When purchased alongside the PowerGard™ Protection Plan1, the John Deere Protect Maintenance Plan makes it easier than ever to preserve the original performance of your equipment with coverage options for the first 36 months/750 header hours or 36 months/1,000 header hours2.

By bundling together annual inspections and scheduled maintenance, you can confidently control your out-of-pocket expenses and optimize your uptime during harvest season, all with no deductible3 and no additional charges.

Secure your annual maintenance costs4 at today's prices and be in a better position to prevent downtime with John Deere Protect.

Minimum PowerGard coverage must be equal to or greater than the months/hours of the John Deere Protect Plan purchased. Longer PowerGard plans can be purchased if desired.

MAINTENANCE

The John Deere Protect Maintenance Plan4 includes:

  • Three Annual Expert Inspections (one per calendar year)
  • Three Scheduled Maintenance Events (one per calendar year)

Minimum PowerGard coverage must be equal to or greater than the months/hours of the John Deere Protect Plan purchased. Longer PowerGard plans can be purchased if desired.

Expert Inspections

Three end-of-season expert inspections included in the John Deere Protect Maintenance Plan help ensure your front-end equipment is ready to run for next season's harvest. Through a 50-plus point inspection process, an expert technician from a participating John Deere dealer will evaluate all the critical areas of your front-end equipment and identify any problems to help you avoid costly, unplanned downtime.

Maintenance Events

To make sure your front-end equipment is properly maintained for upcoming harvests, the John Deere Protect Maintenance Plan includes three end-of-season preventative maintenance events. Expert technicians from a participating John Deere dealer will perform all the maintenance and only use genuine John Deere parts and fluids. See the chart for maintenance schedule details. In-season maintenance is not covered.

 

John Deere Protect Maintenance Schedule:

X and S Series Front-End Equipment

36 MONTHS/750 HOURS

Year 1, 200-250 Hours

  • Lubricate All Grease Fittings On Folding Corn Heads
  • Replace Oil in Row Unit Drive Chains On Folding Corn Heads
  • Lubricate All Grease Fittings On Rigid Corn Head
  • Replace Oil in Row Unit Drive Chains On Rigid Corn Head
  • Lubricate All Grease Fittings On Hinged Frame Rigid Cutter
  • Lubricate All Grease Fittings On Hinged Frame Flex Cutter
  • Lubricate All Grease Fittings On Rigid Frame Flex Cutter
  • Lubricate All Grease Fittings On Belt Pickup

Year 2, 400-500 Hours

  • Lubricate All Grease Fittings On Folding Corn Heads
  • Replace Oil in Row Unit Drive Chains On Folding Corn Heads
  • Lubricate All Grease Fittings On Rigid Corn Head
  • Replace Oil in Row Unit Drive Chains On Rigid Corn Head
  • Lubricate All Grease Fittings On Hinged Frame Rigid Cutter
  • Lubricate All Grease Fittings On Hinged Frame Flex Cutter
  • Lubricate All Grease Fittings On Rigid Frame Flex Cutter
  • Lubricate All Grease Fittings On Belt Pickup

Year 3, 600-750 Hours

  • Lubricate All Grease Fittings On Folding Corn Heads
  • Replace Oil in Row Unit Drive Chains On Folding Corn Heads
  • Lubricate All Grease Fittings On Rigid Corn Head
  • Replace Oil in Row Unit Drive Chains On Rigid Corn Head
  • Lubricate All Grease Fittings On Hinged Frame Rigid Cutter
  • Lubricate All Grease Fittings On Hinged Frame Flex Cutter
  • Lubricate All Grease Fittings On Rigid Frame Flex Cutter
  • Lubricate All Grease Fittings On Belt Pickup

36 MONTHS/1,000 HOURS

Year 1, 275-330 Hours

  • Lubricate All Grease Fittings On Folding Corn Heads
  • Replace Oil in Row Unit Drive Chains On Folding Corn Heads
  • Lubricate All Grease Fittings On Rigid Corn Head
  • Replace Oil in Row Unit Drive Chains On Rigid Corn Head
  • Lubricate All Grease Fittings On Hinged Frame Rigid Cutter
  • Lubricate All Grease Fittings On Hinged Frame Flex Cutter
  • Lubricate All Grease Fittings On Rigid Frame Flex Cutter
  • Lubricate All Grease Fittings On Belt Pickup

Year 2, 550-660 Hours

  • Lubricate All Grease Fittings On Folding Corn Heads
  • Replace Oil in Row Unit Drive Chains On Folding Corn Heads
  • Lubricate All Grease Fittings On Rigid Corn Head
  • Replace Oil in Row Unit Drive Chains On Rigid Corn Head
  • Lubricate All Grease Fittings On Hinged Frame Rigid Cutter
  • Lubricate All Grease Fittings On Hinged Frame Flex Cutter
  • Lubricate All Grease Fittings On Rigid Frame Flex Cutter
  • Lubricate All Grease Fittings On Belt Pickup

Year 3, 825-1,000 Hours

  • Lubricate All Grease Fittings On Folding Corn Heads
  • Replace Oil in Row Unit Drive Chains On Folding Corn Heads
  • Replace Oil in Row Unit Gear Cases (If Equipped) On Folding Corn Heads
  • Replace Oil in StalkMaster™ Front Gear Case (If Equipped) On Folding Corn Heads
  • Replace Oil in StalkMaster™ Rear Gear Case (If Equipped) On Folding Corn Heads
  • Lubricate All Grease Fittings On Rigid Corn Head
  • Replace Oil in Row Unit Drive Chains On Rigid Corn Head
  • Replace Oil in Row Unit Gear Cases (If Equipped) On Rigid Corn Head
  • Replace Oil in StalkMaster™ Front Gear Case (If Equipped) On Rigid Corn Head
  • Replace Oil in StalkMaster™ Rear Gear Case (If Equipped) On Rigid Corn Head
  • Lubricate All Grease Fittings On Hinged Frame Rigid Cutter
  • Replace Main Gear Case Oil On Hinged Frame Rigid Cutter
  • Replace Center Feed Drum Gear Case Oil On Hinged Frame Rigid Cutter
  • Replace Center Feed Belt Gear Case Oil On Hinged Frame Rigid Cutter
  • Lubricate All Grease Fittings On Hinged Frame Flex Cutter
  • Replace Main Gear Case Oil On Hinged Frame Flex Cutter
  • Replace Center Feed Drum Gear Case Oil On Hinged Frame Flex Cutter
  • Replace Center Feed Belt Gear Case Oil On Hinged Frame Flex Cutter
  • Lubricate All Grease Fittings On Rigid Frame Flex Cutter
  • Replace Main Gear Case Oil On Rigid Frame Flex Cutter
  • Lubricate All Grease Fittings On Belt Pickup

To learn more about the benefits of John Deere Protect, contact a participating John Deere dealer.

1PowerGard Protection Plan with minimum terms equal to or greater than the months/hours of the desired John Deere Protect Plan must be purchased separately to be eligible for John Deere Protect extended service plans. Additional details are included in the selling description of each plan.

2Not all models are equipped with hour meters. Combine engine hour readings may be used to determine coverage term for models without hour meters.

3PowerGard deductible applies to any failures under PowerGard coverage.

4For complete plan details, contact a participating John Deere dealer near you.

9 Series Row Crop Tractors

9 Series Row Crop Tractors

View Downloadable PDF

Now that you've purchased a brand-new John Deere 9 Series Tractor, it's time to keep it in tip-top shape with John Deere Protect™ Maintenance Plus.

When purchased alongside the PowerGard™ Protection Plan1, John Deere Protect Maintenance Plus makes it easier than ever to maintain your tractor's performance and efficiency while controlling your out-of-pocket expenses.

By bundling together annual inspections, scheduled maintenance, and uptime assurance, you can confidently maintain the original performance and uptime of your 9R, 9RT, or 9RX Tractor, all with no deductible2 and no additional charges.

Secure your annual maintenance costs3 at today's prices and be in a better position to prevent downtime with John Deere Protect.

MAINTENANCE PLUS

The John Deere Protect Maintenance Plus Plan4 includes:

  • 3-5 Annual Expert Inspections
  • 3-10 Scheduled Maintenance Events5
  • 24-Hour Uptime Assurance

Term Lengths Offered:

  • 36 Months/1,500 Hours
  • 36 Months/3,000 Hours
  • 60 Months/3,000 Hours
  • 60 Months/5,000 Hours

Minimum PowerGard coverage must be equal to or greater than the months/hours of the John Deere Protect Plan purchased. Longer PowerGard plans can be purchased if desired.

The valuable coverage offered through John Deere Protect ensures you'll keep your operating expenses in check while helping you maintain the performance and reliability of your 9 Series Tractor. With expert inspections, scheduled maintenance events, and 24-hour uptime assurance, you'll be ready to take on whatever this season—and next—has in store.

Expert Inspections

End-of-season expert inspections help ensure your 9 Series Tractor will be ready to run for next season's fieldwork. An expert technician from your local dealership will evaluate all the critical areas of your tractor and identify any potential problems, so you can avoid costly, unplanned downtime.

Maintenance Events6

With all the recommended preventative maintenance scheduled at its required hour intervals, you can ensure your 9 Series Tractor is properly maintained. Expert technicians from your local dealership will perform the maintenance and only use genuine John Deere parts and fluids. See the chart for maintenance schedule details.

24-Hour Uptime Assurance

John Deere Protect Uptime Assurance enables you to keep working if your 9 Series7 Tractor is sidelined and cannot be repaired within 24 hours. Subject to machine availability, a rental machine will be provided while yours is being repaired. To qualify, every expert inspection and maintenance event (and all the suggested adjustments and repairs) must be completed by your local John Deere dealer.

To learn more about the benefits of John Deere Protect, contact a participating John Deere dealer.

 

John Deere Protect Maintenance Schedule:

9 Series Row Crop Tractors

1,500-HOUR OFFERING

500 Hours

  • Engine Oil and Filter
  • Fuel Filters
  • Check, Clean, and Lubricate as Needed
  • Fuel Water Separator (Optional)

1,000 Hours

  • Engine Oil and Filter
  • Fuel Filters
  • Check, Clean, and Lubricate as Needed
  • Fuel Water Separator (Optional)
  • Cab Recirculation Air Filter
  • Cab Fresh Air Filter
  • Engine Primary and Secondary Air Filters

1,500 Hours

  • Engine Oil and Filter
  • Fuel Filters
  • Check, Clean, and Lubricate as Needed
  • Fuel Water Separator (Optional)
  • Transmission Hydraulic Oil
  • Transmission Hydraulic Oil and Filters
  • Transmission Hydraulic Vent Filters
  • Engine Cooling System Radiator Cap*
  • Diesel Exhaust Fluid (DEF) Tank Vent Filter
  • Fuel Tank Vent Filter
  • Selective Control Valve (SCV) Pilot Valve Filter
  • DEF Dosing Unit Filter

3,000-HOUR OFFERING

2,000 Hours

  • Engine Oil and Filter
  • Fuel Filters
  • Check, Clean, and Lubricate as Needed
  • Fuel Water Separator (Optional)
  • Cab Recirculation Air Filter
  • Cab Fresh Air Filter
  • Engine Primary and Secondary Air Filters

2,500 Hours

  • Engine Oil and Filter
  • Fuel Filters
  • Check, Clean, and Lubricate as Needed
  • Fuel Water Separator (Optional)

3,000 Hours

  • Engine Oil and Filter
  • Fuel Filters
  • Check, Clean, and Lubricate as Needed
  • Fuel Water Separator (Optional)
  • Cab Recirculation Air Filter
  • Cab Fresh Air Filter
  • Engine Primary and Secondary Air Filters
  • Transmission Hydraulic Oil
  • Transmission Hydraulic Oil and Filters
  • Transmission Hydraulic Vent Filters
  • Engine Cooling System Radiator Cap*
  • Diesel Exhaust Fluid (DEF) Tank Vent Filter
  • Fuel Tank Vent Filter
  • Selective Control Valve (SCV) Pilot Valve Filter
  • DEF Dosing Unit Filter
  • DEF In-Line Supply Filter
  • Engine Crankcase Breather Filter Element*

*9RT Model 3,000 Hour Service Excluded

5,000-HOUR OFFERING

3,500 Hours

  • Engine Oil and Filter
  • Fuel Filters
  • Check, Clean, and Lubricate as Needed
  • Fuel Water Separator (Optional)

4,000 Hours

  • Engine Oil and Filter
  • Fuel Filters
  • Check, Clean, and Lubricate as Needed
  • Fuel Water Separator (Optional)
  • Cab Recirculation Air Filter
  • Cab Fresh Air Filter
  • Engine Primary and Secondary Air Filters

4,500 Hours

  • Engine Oil and Filter
  • Fuel Filters
  • Check, Clean, and Lubricate as Needed
  • Fuel Water Separator (Optional)
  • Transmission Hydraulic Oil
  • Transmission Hydraulic Oil and Filters
  • Transmission Hydraulic Vent Filters
  • Engine Cooling System Radiator Cap*
  • Diesel Exhaust Fluid (DEF) Tank Vent Filter
  • Fuel Tank Vent Filter
  • Selective Control Valve (SCV) Pilot Valve Filter
  • DEF Dosing Unit Filter

5,000 Hours

  • Engine Oil and Filter
  • Fuel Filters
  • Check, Clean, and Lubricate as Needed
  • Fuel Water Separator (Optional)
  • Cab Recirculation Air Filter
  • Cab Fresh Air Filter
  • Engine Primary and Secondary Air Filters

1PowerGard Protection Plan with minimum terms equal to or greater than the months/hours of the desired John Deere Protect Plan must be purchased separately to be eligible for John Deere Protect extended service plans. Additional details are included in the selling description of each plan.

2PowerGard deductible applies to any failures under PowerGard coverage.

3Plan excludes diesel fuel and diesel exhaust fluid (DEF).

4For complete plan details, contact a participating dealer near you.

5Number of Scheduled Maintenance Events varies based on specific model and John Deere Protect plan. Please see participating dealer for complete details.

6Daily maintenance items are not covered.

7Uptime Assurance and 60-month plan options are currently unavailable for high-horsepower 9RX 710, 9RX 770, and 9RX 830 models.

8 Series Row Crop Tractor

8 Series Row Crop Tractors

View Downloadable PDF

Now that you've purchased a brand-new John Deere 8 Series Tractor, it's time to keep it in tip-top shape with John Deere Protect™ Maintenance Plus.

When purchased alongside the PowerGard™ Protection Plan1, John Deere Protect Maintenance Plus makes it easier than ever to maintain your tractor's performance and efficiency while controlling your out-of-pocket expenses.

By bundling together annual inspections, scheduled maintenance, and uptime assurance, you can confidently maintain the original performance and uptime of your 8 Series Tractor, all with no deductible2 and no additional charges.

Secure your annual maintenance costs3 at today's prices and be in a better position to prevent downtime with John Deere Protect.

MAINTENANCE PLUS

The John Deere Protect Maintenance Plus Plan4 includes:

  • 3-5 Annual Expert Inspections
  • 3-10 Scheduled Maintenance Events5
  • 24-Hour Uptime Assurance

Term Lengths Offered:

  • 36 Months/1,500 Hours
  • 36 Months/3,000 Hours
  • 60 Months/3,000 Hours
  • 60 Months/5,000 Hours

Minimum PowerGard coverage must be equal to or greater than the months/hours of the John Deere Protect Plan purchased. Longer PowerGard plans can be purchased if desired.

The valuable coverage offered through John Deere Protect ensures you'll keep your operating expenses in check while helping you maintain the performance and reliability of your 8 Series Tractor. With expert inspections, scheduled maintenance events, and 24-hour uptime assurance, you'll be ready to take on whatever this season—and next—has in store.

Expert Inspections

End-of-season expert inspections help ensure your 8 Series Tractor will be ready to run for next season's fieldwork. An expert technician from your local dealership will evaluate all the critical areas of your tractor and identify any potential problems, so you can avoid costly, unplanned downtime.

Maintenance Events6

With all the recommended preventative maintenance scheduled at its required hour intervals, you can ensure your 8 Series Tractor is properly maintained. Expert technicians from your local dealership will perform the maintenance and only use genuine John Deere parts and fluids. See the chart for maintenance schedule details.

24-Hour Uptime Assurance

John Deere Protect Uptime Assurance enables you to keep working if your 8 Series Tractor is sidelined and cannot be repaired within 24 hours. Subject to machine availability, a rental machine will be provided while yours is being repaired. To qualify, every expert inspection and maintenance event (and all the suggested adjustments and repairs) must be completed by your local John Deere dealer.

To learn more about the benefits of John Deere Protect, contact a participating John Deere dealer.

 

John Deere Protect Maintenance Schedule:

8 Series Row Crop Tractors

1,500-HOUR OFFERING

500 Hours

  • Change Engine Oil and Filter
  • Change Fuel Filters
  • Change Severe Duty Fuel/Water Separator Filter (If Equipped)
  • Lubricate Mechanical Front-Wheel Drive (MFWD) Kingpins, Tie Rod Ends, and Axle Pivot Fittings
  • Lubricate Front Power Take-Off (PTO) Drive Shaft (If Equipped)

1,000 Hours

  • Change Engine Oil and Filter
  • Change Fuel Filters
  • Change Severe Duty Fuel/Water Separator Filter (If Equipped)
  • Lubricate Mechanical Front-Wheel Drive (MFWD) Kingpins, Tie Rod Ends, and Axle Pivot Fittings
  • Lubricate Front Power Take-Off (PTO) Drive Shaft (If Equipped)
  • Change Cab Recirculation Air Filter
  • Change Cab Fresh Air Filter
  • Change Primary and Secondary Engine Air Filters

1,500 Hours

  • Change Engine Oil and Filter
  • Change Fuel Filters
  • Change Severe Duty Fuel/Water Separator Filter (If Equipped)
  • Lubricate Mechanical Front-Wheel Drive (MFWD) Kingpins, Tie Rod Ends, and Axle Pivot Fittings
  • Lubricate Front Power Take-Off (PTO) Drive Shaft (If Equipped)
  • Change Transmission-Hydraulic Oil and Steering Filters
  • Change Hydraulic System Oil
  • Change MFWD or Independent-Link Suspension (ILS™) Wheel Hub Oil
  • Change MFWD Axle Housing Oil
  • Change Diesel Exhaust Fluid (DEF) Tank Vent Filter - FT4/Stage V Engines
  • Change Fuel Tank Vent Filter
  • Change DEF Tank Vent Filter
  • Change Front Suspension Air Compressor Inlet Filter
  • Change Selective Control Valve (SCV) Pilot Filter
  • Lubricate Draft Link Support Shaft Bushing

3,000-HOUR OFFERING

2,000 Hours

  • Change Engine Oil and Filter
  • Change Fuel Filters
  • Change Severe Duty Fuel/Water Separator Filter (If Equipped)
  • Lubricate Mechanical Front-Wheel Drive (MFWD) Kingpins, Tie Rod Ends, and Axle Pivot Fittings
  • Lubricate Front Power Take-Off (PTO) Drive Shaft (If Equipped)
  • Change Cab Recirculation Air Filter
  • Change Cab Fresh Air Filter
  • Change Primary and Secondary Engine Air Filters

2,500 Hours

  • Change Engine Oil and Filter
  • Change Fuel Filters
  • Change Severe Duty Fuel/Water Separator Filter (If Equipped)
  • Lubricate Mechanical Front-Wheel Drive (MFWD) Kingpins, Tie Rod Ends, and Axle Pivot Fittings
  • Lubricate Front Power Take-Off (PTO) Drive Shaft (If Equipped)

3,000 Hours

  • Change Engine Oil and Filter
  • Change Fuel Filters
  • Change Severe Duty Fuel/Water Separator Filter (If Equipped)
  • Lubricate Mechanical Front-Wheel Drive (MFWD) Kingpins, Tie Rod Ends, and Axle Pivot Fittings
  • Lubricate Front Power Take-Off (PTO) Drive Shaft (If Equipped)
  • Change Cab Recirculation Air Filter
  • Change Cab Fresh Air Filter
  • Change Primary and Secondary Engine Air Filters
  • Change Transmission-Hydraulic Oil and Steering Filters
  • Change Hydraulic System Oil
  • Change MFWD or Independent-Link Suspension (ILS™) Wheel Hub Oil
  • Change MFWD Axle Housing Oil
  • Change Diesel Exhaust Fluid (DEF) Tank Vent Filter - FT4/Stage V Engines
  • Change Fuel Tank Vent Filter
  • Change DEF Tank Vent Filter
  • Change Front Suspension Air Compressor Inlet Filter
  • Change Selective Control Valve (SCV) Pilot Filter
  • Lubricate Draft Link Support Shaft Bushing
  • Change DEF Dosing Unit Filter - FT4/Stage V Engines
  • Change DEF In-Line Supply Filter - FT4/Stage V Engines

5,000-HOUR OFFERING

3,500 Hours

  • Change Engine Oil and Filter
  • Change Fuel Filters
  • Change Severe Duty Fuel/Water Separator Filter (If Equipped)
  • Lubricate Mechanical Front-Wheel Drive (MFWD) Kingpins, Tie Rod Ends, and Axle Pivot Fittings
  • Lubricate Front Power Take-Off (PTO) Drive Shaft (If Equipped)

4,000 Hours

  • Change Engine Oil and Filter
  • Change Fuel Filters
  • Change Severe Duty Fuel/Water Separator Filter (If Equipped)
  • Lubricate Mechanical Front-Wheel Drive (MFWD) Kingpins, Tie Rod Ends, and Axle Pivot Fittings
  • Lubricate Front Power Take-Off (PTO) Drive Shaft (If Equipped)
  • Change Cab Recirculation Air Filter
  • Change Cab Fresh Air Filter
  • Change Primary and Secondary Engine Air Filters

4,500 Hours

  • Change Engine Oil and Filter
  • Change Fuel Filters
  • Change Severe Duty Fuel/Water Separator Filter (If Equipped)
  • Lubricate Mechanical Front-Wheel Drive (MFWD) Kingpins, Tie Rod Ends, and Axle Pivot Fittings
  • Lubricate Front Power Take-Off (PTO) Drive Shaft (If Equipped)
  • Change Transmission-Hydraulic Oil and Steering Filters
  • Change Hydraulic System Oil
  • Change MFWD or Independent-Link Suspension (ILS™) Wheel Hub Oil
  • Change MFWD Axle Housing Oil
  • Change Diesel Exhaust Fluid (DEF) Tank Vent Filter - FT4/Stage V Engines
  • Change Fuel Tank Vent Filter
  • Change DEF Tank Vent Filter
  • Change Front Suspension Air Compressor Inlet Filter
  • Change Selective Control Valve (SCV) Pilot Filter
  • Lubricate Draft Link Support Shaft Bushing
  • Replace Torsional Damper

5,000 Hours

  • Change Engine Oil and Filter
  • Change Fuel Filters
  • Change Severe Duty Fuel/Water Separator Filter (If Equipped)
  • Lubricate Mechanical Front-Wheel Drive (MFWD) Kingpins, Tie Rod Ends, and Axle Pivot Fittings
  • Lubricate Front Power Take-Off (PTO) Drive Shaft (If Equipped)
  • Change Cab Recirculation Air Filter
  • Change Cab Fresh Air Filter
  • Change Primary and Secondary Engine Air Filters

 

1PowerGard Protection Plan with minimum terms equal to or greater than the months/hours of the desired John Deere Protect Plan must be purchased separately to be eligible for John Deere Protect extended service plans. Additional details are included in the selling description of each plan.

2PowerGard deductible applies to any failures under PowerGard coverage.

3Plan excludes diesel fuel and diesel exhaust fluid (DEF).

4For complete plan details, contact a participating dealer near you.

5Number of Scheduled Maintenance Events varies based on specific model and John Deere Protect plan. Please see your participating dealer for complete details.

6Daily maintenance items are not covered.

7 Series Tractors

7R Series Tractors

View Downloadable PDF

Now that you've purchased a brand-new John Deere 7R Series Tractor, it's time to keep it in tip-top shape with John Deere Protect™ Maintenance Plus.

When purchased alongside the PowerGard™ Protection Plan1, John Deere Protect Maintenance Plus makes it easier than ever to maintain your tractor's performance and efficiency while controlling your out-of-pocket expenses.

By bundling together annual inspections, scheduled maintenance, and uptime assurance, you can confidently maintain the original performance and uptime of your 7R Series Tractor, all with no deductible2 and no additional charges.

Secure your annual maintenance costs3 at today's prices and be in a better position to prevent downtime with John Deere Protect.

MAINTENANCE PLUS

The John Deere Protect Maintenance Plus Plan4 includes:

  • 3-5 Annual Expert Inspections
  • 3-10 Scheduled Maintenance Events5
  • 24-Hour Uptime Assurance

Term Lengths Offered:

  • 36 Months/1,500 Hours
  • 36 Months/3,000 Hours
  • 60 Months/3,000 Hours
  • 60 Months/5,000 Hours

Minimum PowerGard coverage must be equal to or greater than the months/hours of the John Deere Protect Plan purchased. Longer PowerGard plans can be purchased if desired.

The valuable coverage offered through John Deere Protect ensures you'll keep your operating expenses in check while helping you maintain the performance and reliability of your 7R Series Tractor. With expert inspections, scheduled maintenance events, and 24-hour uptime assurance, you'll be ready to take on whatever this season—and next—has in store.

Expert Inspections

End-of-season expert inspections help ensure your 7R Series Tractor will be ready to run for next season's fieldwork. An expert technician from your local dealership will evaluate all the critical areas of your tractor and identify any potential problems, so you can avoid costly, unplanned downtime.

Maintenance Events6

With all the recommended preventative maintenance scheduled at its required hour intervals, you can ensure your 7R Series Tractor is properly maintained. Expert technicians from your local dealership will perform the maintenance and only use genuine John Deere parts and fluids. See the chart for maintenance schedule details.

24-Hour Uptime Assurance

John Deere Protect Uptime Assurance enables you to keep working if your 7R Series Tractor is sidelined and cannot be repaired within 24 hours. Subject to machine availability, a rental machine will be provided while yours is being repaired. To qualify, every expert inspection and maintenance event (and all the suggested adjustments and repairs) must be completed by your local John Deere dealer.

To learn more about the benefits of John Deere Protect, contact a participating John Deere dealer.

 

John Deere Protect Maintenance Schedule:

7R Series Tractors

1,500-HOUR OFFERING

500 Hours

  • Grease All Required Fittings
  • Change Engine Oil and Filter
  • Change Fuel Filters
  • Change Fuel Water Separator and Filter Element (Optional)
  • Lubricate Mechanical Front-Wheel Drive (MFWD) Kingpins, Tie Rod Ends, Axle Pivot Fittings, and Steering Cylinders
  • Lubricate Triple-Link Suspension (TLS™) Plus External Fittings and U-Joints
  • Lubricate Rear and Front Hitch Components
  • Tighten Wheel, Wheel Weight, and Axle Bolts

1,000 Hours

  • Grease All Required Fittings
  • Change Engine Oil and Filter
  • Change Fuel Filters
  • Change Fuel Water Separator and Filter Element (Optional)
  • Lubricate Mechanical Front-Wheel Drive (MFWD) Kingpins, Tie Rod Ends, Axle Pivot Fittings, and Steering Cylinders
  • Lubricate Triple-Link Suspension (TLS™) Plus External Fittings and U-Joints
  • Lubricate Rear and Front Hitch Components
  • Tighten Wheel, Wheel Weight, and Axle Bolts
  • Change Cab Fresh Air and Recirculation Air Filter
  • Change Engine Primary and Secondary Air Filters

1,500 Hours

  • Grease All Required Fittings
  • Change Engine Oil and Filter
  • Change Fuel Filters
  • Change Fuel Water Separator and Filter Element (Optional)
  • Lubricate Mechanical Front-Wheel Drive (MFWD) Kingpins, Tie Rod Ends, Axle Pivot Fittings, and Steering Cylinders
  • Lubricate Triple-Link Suspension (TLS™) Plus External Fittings and U-Joints
  • Lubricate Rear and Front Hitch Components
  • Tighten Wheel, Wheel Weight, and Axle Bolts
  • Change Fuel Tank Vent Filter
  • Change Transmission-Hydraulic Oil and Filters
  • Change MFWD or TLS™ Axle Housing Oil
  • Change MFWD or TLS™ Wheel Hub Oil
  • Change Front Power Take-Off (PTO) Oil and Filter
  • Change Diesel Exhaust Fluid (DEF) Tank Vent Filter
  • Change Open Crankcase Ventilation Filter - 6.8 L Engines
  • Change Selective Control Valve (SCV) Pilot Valve Filter
  • Lubricate Draft Link Support Shaft Bushing

3,000-HOUR OFFERING

2,000 Hours

  • Grease All Required Fittings
  • Change Engine Oil and Filter
  • Change Fuel Filters
  • Change Fuel Water Separator and Filter Element (Optional)
  • Lubricate Mechanical Front-Wheel Drive (MFWD) Kingpins, Tie Rod Ends, Axle Pivot Fittings, and Steering Cylinders
  • Lubricate Triple-Link Suspension (TLS™) Plus External Fittings and U-Joints
  • Lubricate Rear and Front Hitch Components
  • Tighten Wheel, Wheel Weight, and Axle Bolts
  • Change Cab Fresh Air and Recirculation Air Filter
  • Change Engine Primary and Secondary Air Filters
  • Change Trailer Air Brake Air Dryer Filter

2,500 Hours

  • Grease All Required Fittings
  • Change Engine Oil and Filter
  • Change Fuel Filters
  • Change Fuel Water Separator and Filter Element (Optional)
  • Lubricate Mechanical Front-Wheel Drive (MFWD) Kingpins, Tie Rod Ends, Axle Pivot Fittings, and Steering Cylinders
  • Lubricate Triple-Link Suspension (TLS™) Plus External Fittings and U-Joints
  • Lubricate Rear and Front Hitch Components
  • Tighten Wheel, Wheel Weight, and Axle Bolts

3,000 Hours

  • Grease All Required Fittings
  • Change Engine Oil and Filter
  • Change Fuel Filters
  • Change Fuel Water Separator and Filter Element (Optional)
  • Lubricate Mechanical Front-Wheel Drive (MFWD) Kingpins, Tie Rod Ends, Axle Pivot Fittings, and Steering Cylinders
  • Lubricate Triple-Link Suspension (TLS™) Plus External Fittings and U-Joints
  • Lubricate Rear and Front Hitch Components
  • Tighten Wheel, Wheel Weight, and Axle Bolts
  • Change Cab Fresh Air and Recirculation Air Filter
  • Change Engine Primary and Secondary Air Filters
  • Change Fuel Tank Vent Filter
  • Change Transmission-Hydraulic Oil and Filters
  • Change MFWD or TLS™ Axle Housing Oil
  • Change MFWD or TLS™ Wheel Hub Oil
  • Change Front Power Take-Off (PTO) Oil and Filter
  • Change Diesel Exhaust Fluid (DEF) Tank Vent Filter
  • Change Open Crankcase Ventilation Filter - 6.8 L Engines
  • Change Selective Control Valve (SCV) Pilot Valve Filter
  • Lubricate Draft Link Support Shaft Bushing
  • Change Engine Valve Clearance
  • Change DEF In-Line Supply Filter - FT4/Stage V Engines
  • Adjust DEF Dosing Unit Filter - FT4/Stage V Engines

5,000-HOUR OFFERING

3,500 Hours

  • Grease All Required Fittings
  • Change Engine Oil and Filter
  • Change Fuel Filters
  • Change Fuel Water Separator and Filter Element (Optional)
  • Lubricate Mechanical Front-Wheel Drive (MFWD) Kingpins, Tie Rod Ends, Axle Pivot Fittings, and Steering Cylinders
  • Lubricate Triple-Link Suspension (TLS™) Plus External Fittings and U-Joints
  • Lubricate Rear and Front Hitch Components
  • Tighten Wheel, Wheel Weight, and Axle Bolts

4,000 Hours

  • Grease All Required Fittings
  • Change Engine Oil and Filter
  • Change Fuel Filters
  • Change Fuel Water Separator and Filter Element (Optional)
  • Lubricate Mechanical Front-Wheel Drive (MFWD) Kingpins, Tie Rod Ends, Axle Pivot Fittings, and Steering Cylinders
  • Lubricate Triple-Link Suspension (TLS™) Plus External Fittings and U-Joints
  • Lubricate Rear and Front Hitch Components
  • Tighten Wheel, Wheel Weight, and Axle Bolts
  • Change Cab Fresh Air and Recirculation Air Filter
  • Change Engine Primary and Secondary Air Filters
  • Change Trailer Air Brake Air Dryer Filter

4,500 Hours

  • Grease All Required Fittings
  • Change Engine Oil and Filter
  • Change Fuel Filters
  • Change Fuel Water Separator and Filter Element (Optional)
  • Lubricate Mechanical Front-Wheel Drive (MFWD) Kingpins, Tie Rod Ends, Axle Pivot Fittings, and Steering Cylinders
  • Lubricate Triple-Link Suspension (TLS™) Plus External Fittings and U-Joints
  • Lubricate Rear and Front Hitch Components
  • Tighten Wheel, Wheel Weight, and Axle Bolts
  • Change Fuel Tank Vent Filter
  • Change Transmission-Hydraulic Oil and Filters
  • Change MFWD or TLS™ Axle Housing Oil
  • Change MFWD or TLS™ Wheel Hub Oil
  • Change Front Power Take-Off (PTO) Oil and Filter
  • Change Diesel Exhaust Fluid (DEF) Tank Vent Filter
  • Change Open Crankcase Ventilation Filter - 6.8 L Engines
  • Change Selective Control Valve (SCV) Pilot Valve Filter
  • Lubricate Draft Link Support Shaft Bushing
  • Replace Torsional Damper

5,000 Hours

  • Grease All Required Fittings
  • Change Engine Oil and Filter
  • Change Fuel Filters
  • Change Fuel Water Separator and Filter Element (Optional)
  • Lubricate Mechanical Front-Wheel Drive (MFWD) Kingpins, Tie Rod Ends, Axle Pivot Fittings, and Steering Cylinders
  • Lubricate Triple-Link Suspension (TLS™) Plus External Fittings and U-Joints
  • Lubricate Rear and Front Hitch Components
  • Tighten Wheel, Wheel Weight, and Axle Bolts
  • Change Cab Fresh Air and Recirculation Air Filter
  • Change Engine Primary and Secondary Air Filters

1PowerGard Protection Plan with minimum terms equal to or greater than the months/hours of the desired John Deere Protect Plan must be purchased separately to be eligible for John Deere Protect extended service plans. Additional details are included in the selling description of each plan.

2PowerGard deductible applies to any failures under PowerGard coverage.

3Plan excludes diesel fuel and diesel exhaust fluid (DEF).

4For complete plan details, contact a participating dealer near you.

5Number of Scheduled Maintenance Events varies based on specific model and John Deere Protect plan. Please see participating dealer for complete details.

6Daily maintenance items are not covered.

6M/6R Series Utility/Row Crop Tractors

6M & 6R Series Utility Tractors

View Downloadable PDF

Now that you've purchased a brand-new John Deere 6M or 6R Series Utility Tractor, it's time to keep it in tip-top shape with John Deere Protect™ Maintenance Plus.

When purchased alongside the PowerGard™ Protection Plan1, John Deere Protect Maintenance Plus makes it easier than ever to maintain your tractor's performance and efficiency while controlling your out-of-pocket expenses.

By bundling together annual inspections, scheduled maintenance, and uptime assurance, you can confidently maintain the original performance and uptime of your 6M or 6R Series Tractor, all with no deductible2 and no additional charges.

Secure your annual maintenance costs3 at today's prices and be in a better position to prevent downtime with John Deere Protect.

MAINTENANCE PLUS

The John Deere Protect Maintenance Plus Plan4 includes:

  • 3-5 Annual Expert Inspections
  • 2-10 Scheduled Maintenance Events5
  • 24-Hour Uptime Assurance

Term Lengths Offered:

  • 36 Months/1,500 Hours
  • 36 Months/3,000 Hours
  • 60 Months/3,000 Hours
  • 60 Months/5,000 Hours

Minimum PowerGard coverage must be equal to or greater than the months/hours of the John Deere Protect Plan purchased. Longer PowerGard plans can be purchased if desired.

The valuable coverage offered through John Deere Protect ensures you'll keep your operating expenses in check while helping you maintain the performance and reliability of your 6M or 6R Series Tractor. With expert inspections, scheduled maintenance events, and 24-hour uptime assurance, you'll be ready to take on whatever this season—and next—has in store.

Expert Inspections

End-of-season expert inspections help ensure your 6M or 6R Tractor will be ready to run for next season's fieldwork. An expert technician from your local dealership will evaluate all the critical areas of your tractor and identify any potential problems, so you can avoid costly, unplanned downtime.

Maintenance Events6

With all the recommended preventative maintenance scheduled at its required hour intervals, you can ensure your 6M or 6R Series Tractor is properly maintained. Expert technicians from your local dealership will perform the maintenance and only use genuine John Deere parts and fluids. See the chart for maintenance schedule details.

24-Hour Uptime Assurance

John Deere Protect Uptime Assurance enables you to keep working if your 6M or 6R Series Tractor is sidelined and cannot be repaired within 24 hours. Subject to machine availability, a rental machine will be provided while yours is being repaired. To qualify, every expert inspection and maintenance event (and all the suggested adjustments and repairs) must be completed by your local John Deere dealer.

To learn more about the benefits of John Deere Protect, contact a participating John Deere dealer.

 

John Deere Protect Maintenance Schedule: 6R 110, 6R 120, 6R 130, 6R 140, 6R 150*

*Canada Only

1,500-HOUR OFFERING

BREAK-IN

  • Lubricate All Grease Fittings
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Axle Housing Oil
  • Replace Final Drives Oil

500 Hours

  • Lubricate All Grease Fittings
  • Replace Engine Oil and Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Final Drives Oil
  • Replace Front Power Take-Off (PTO) Oil Filter

1,000 Hours

  • Lubricate All Grease Fittings
  • Replace Engine Oil and Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Final Drives Oil
  • Replace Front Power Take-Off (PTO) Oil Filter

1,500 Hours

  • Lubricate All Grease Fittings
  • Replace Cab Recirculation Air Filter
  • Replace Cab Fresh Air Filter
  • Replace Engine Oil and Filter
  • Replace Primary Engine Air Filter
  • Replace Open Crankcase Ventilation Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Transmission/Hydraulic Oil
  • Replace Axle Housing Oil
  • Replace Final Drives Oil
  • Replace Front Power Take-Off (PTO) Oil Filter
  • Replace Front PTO Oil

3,000-HOUR OFFERING

2,000 Hours

  • Lubricate All Grease Fittings
  • Replace Engine Oil and Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Final Drives Oil
  • Replace Front Power Take-Off (PTO) Oil Filter

2,250 Hours

2,500 Hours

  • Lubricate All Grease Fittings
  • Replace Engine Oil and Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Final Drives Oil
  • Replace Front Power Take-Off (PTO) Oil Filter

3,000 Hours

  • Lubricate All Grease Fittings
  • Replace Cab Recirculation Air Filter
  • Replace Cab Fresh Air Filter
  • Replace Engine Oil and Filter
  • Replace Primary Engine Air Filter
  • Replace Open Crankcase Ventilation Filter
  • Adjust Engine Valve Clearance
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Transmission/Hydraulic Oil
  • Replace Axle Housing Oil
  • Replace Final Drives Oil
  • Replace Front Power Take-Off (PTO) Oil Filter
  • Replace Front PTO Oil

5,000-HOUR OFFERING

3,500 Hours

  • Lubricate All Grease Fittings
  • Replace Engine Oil and Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Final Drives Oil
  • Replace Front Power Take-Off (PTO) Oil Filter

4,000 Hours

  • Lubricate All Grease Fittings
  • Replace Engine Oil and Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Final Drives Oil
  • Replace Front Power Take-Off (PTO) Oil Filter

4,500 Hours

  • Lubricate All Grease Fittings
  • Replace Cab Recirculation Air Filter
  • Replace Cab Fresh Air Filter
  • Replace Engine Oil and Filter
  • Replace Primary Engine Air Filter
  • Replace Open Crankcase Ventilation Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Transmission/Hydraulic Oil
  • Replace Axle Housing Oil
  • Replace Final Drives Oil
  • Replace Front Power Take-Off (PTO) Oil Filter
  • Replace Front PTO Oil

5,000 Hours

  • Lubricate All Grease Fittings
  • Replace Engine Oil and Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Final Drives Oil
  • Replace Front Power Take-Off (PTO) Oil Filter

 

John Deere Protect Maintenance Schedule: 6R 145, 6R 155, 6R 165, 6R 175, 6R 185*, 6R 195, 6R 215, 6R 230, 6R 250

1,500-HOUR OFFERING

BREAK-IN

  • Replace Engine Oil and Filter
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Axle Housing Oil
  • Replace Final Drives Oil
  • Replace Electrical Hydraulic Pump Oil

750 Hours

  • Lubricate All Grease Fittings
  • Replace Engine Oil and Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Final Drives Oil
  • Replace Front PTO Oil
  • Replace Electrical Hydraulic Pump Oil

1,000 Hours

  • Lubricate All Grease Fittings

1,500 Hours

  • Lubricate All Grease Fittings
  • Replace Cab Recirculation Air Filter
  • Replace Cab Fresh Air Filter
  • Replace Engine Oil and Filter
  • Replace Primary Engine Air Filter
  • Replace Open Crankcase Ventilation Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Transmission/Hydraulic Oil
  • Replace Axle Housing Oil
  • Replace Final Drives Oil
  • Replace Front Power Take-Off (PTO) Oil Filter
  • Replace Front PTO Oil
  • Replace Electrical Hydraulic Pump Oil

3,000-HOUR OFFERING

2,250 Hours

  • Lubricate All Grease Fittings
  • Replace Engine Oil and Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Final Drives Oil
  • Replace Front Power Take-Off (PTO) Oil Filter
  • Replace Electrical Hydraulic Pump Oil

3,000 Hours

  • Lubricate All Grease Fittings
  • Replace Cab Recirculation Air Filter
  • Replace Cab Fresh Air Filter
  • Replace Engine Oil and Filter
  • Replace Primary Engine Air Filter
  • Replace Open Crankcase Ventilation Filter
  • Adjust Engine Valve Clearance
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Transmission/Hydraulic Oil
  • Replace Axle Housing Oil
  • Replace Final Drives Oil
  • Replace Front Power Take-Off (PTO) Oil Filter
  • Replace Front PTO Oil
  • Replace Electrical Hydraulic Pump Oil

5,000-HOUR OFFERING

3,750 Hours

  • Lubricate All Grease Fittings
  • Replace Engine Oil and Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Final Drives Oil
  • Replace Front Power Take-Off (PTO) Oil Filter
  • Replace Electrical Hydraulic Pump Oil

4,500 Hours

  • Lubricate All Grease Fittings
  • Replace Cab Recirculation Air Filter
  • Replace Cab Fresh Air Filter
  • Replace Engine Oil and Filter
  • Replace Primary Engine Air Filter
  • Replace Open Crankcase Ventilation Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Transmission/Hydraulic Oil
  • Replace Axle Housing Oil
  • Replace Final Drives Oil
  • Replace Front Power Take-Off (PTO) Oil Filter
  • Replace Front PTO Oil
  • Replace Electrical Hydraulic Pump Oil

 

John Deere Protect Maintenance Schedule: 6M 95, 6M 105, 6M 115, 6M 125, 6M 130, 6M 140, 6M 150*

*Canada Only

1,500-HOUR OFFERING

BREAK-IN

  • Lubricate All Grease Fittings
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Axle Housing Oil
  • Replace Final Drives Oil

500 Hours

  • Lubricate All Grease Fittings
  • Replace Engine Oil and Filter
  • Replace Open Crankcase Ventilation Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Final Drives Oil
  • Replace Front Power Take-Off (PTO) Oil Filter

1,000 Hours

  • Lubricate All Grease Fittings
  • Replace Engine Oil and Filter
  • Replace Open Crankcase Ventilation Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Final Drives Oil
  • Replace Front Power Take-Off (PTO) Oil Filter

1,500 Hours

  • Lubricate All Grease Fittings
  • Replace Engine Oil and Filter
  • Replace Primary Engine Air Filter
  • Replace Cab Recirculation Air Filter
  • Replace Cab Fresh Air Filter
  • Replace Open Crankcase Ventilation Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Transmission/Hydraulic Oil
  • Replace Axle Housing Oil
  • Replace Final Drives Oil
  • Replace Front Power Take-Off (PTO) Oil Filter
  • Replace Front PTO Oil

3,000-HOUR OFFERING

2,000 Hours

  • Lubricate All Grease Fittings
  • Replace Engine Oil and Filter
  • Replace Open Crankcase Ventilation Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Final Drives Oil
  • Replace Front Power Take-Off (PTO) Oil Filter

2,500 Hours

  • Lubricate All Grease Fittings
  • Replace Engine Oil and Filter
  • Replace Open Crankcase Ventilation Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Final Drives Oil
  • Replace Front Power Take-Off (PTO) Oil Filter

3,000 Hours

  • Lubricate All Grease Fittings
  • Replace Cab Recirculation Air Filter
  • Replace Cab Fresh Air Filter
  • Replace Engine Oil and Filter
  • Replace Primary Engine Air Filter
  • Replace Open Crankcase Ventilation Filter
  • Adjust Engine Valve Clearance
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Transmission/Hydraulic Oil
  • Replace Axle Housing Oil
  • Replace Final Drives Oil
  • Replace Front Power Take-Off (PTO) Oil Filter
  • Replace Front PTO Oil

5,000-HOUR OFFERING

3,500 Hours

  • Lubricate All Grease Fittings
  • Replace Engine Oil and Filter
  • Replace Open Crankcase Ventilation Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Final Drives Oil
  • Replace Front Power Take-Off (PTO) Oil Filter

4,000 Hours

  • Lubricate All Grease Fittings
  • Replace Engine Oil and Filter
  • Replace Open Crankcase Ventilation Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Final Drives Oil
  • Replace Front Power Take-Off (PTO) Oil Filter

4,500 Hours

  • Lubricate All Grease Fittings
  • Replace Engine Oil and Filter
  • Replace Primary Engine Air Filter
  • Replace Open Crankcase Ventilation Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Diesel Exhaust Fluid (DEF) Dosing Unit Filter
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Transmission/Hydraulic Oil
  • Replace Axle Housing Oil
  • Replace Final Drives Oil
  • Replace Front Power Take-Off (PTO) Oil Filter
  • Replace Front PTO Oil

5,000 Hours

  • Lubricate All Grease Fittings
  • Replace Engine Oil and Filter
  • Replace Cab Recirculation Air Filter
  • Replace Cab Fresh Air Filter
  • Replace Open Crankcase Ventilation Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Final Drives Oil
  • Replace Front Power Take-Off (PTO) Oil Filter

 

John Deere Protect Maintenance Schedule: 6M 145, 6M 155, 6MH 155, 6M 165, 6M 180, 6M 185*, 6M 200, 6M 220, 6M 230, 6M 240*, 6M 250

1,500-HOUR OFFERING

BREAK-IN

  • Lubricate All Grease Fittings
  • Replace Engine Oil and Filter
  • Replace Axle Housing Oil
  • Replace Final Drives Oil

750 Hours

  • Lubricate All Grease Fittings
  • Replace Engine Oil and Filter
  • Replace Open Crankcase Ventilation Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Final Drives Oil
  • Replace Front PTO Oil

1,500 Hours

  • Lubricate All Grease Fittings
  • Replace Engine Oil and Filter
  • Replace Primary Engine Air Filter
  • Replace Cab Recirculation Air Filter
  • Replace Cab Fresh Air Filter
  • Replace Open Crankcase Ventilation Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Axle Housing Oil
  • Replace Final Drives Oil
  • Replace Front Power Take-Off (PTO) Oil Filter
  • Replace Front PTO Oil

3,000-HOUR OFFERING

2,250 Hours

  • Lubricate All Grease Fittings
  • Replace Engine Oil and Filter
  • Replace Open Crankcase Ventilation Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Final Drives Oil
  • Replace Front Power Take-Off (PTO) Oil Filter

3,000 Hours

  • Lubricate All Grease Fittings
  • Replace Cab Recirculation Air Filter
  • Replace Cab Fresh Air Filter
  • Replace Engine Oil and Filter
  • Replace Primary Engine Air Filter
  • Replace Open Crankcase Ventilation Filter
  • Adjust Engine Valve Clearance
  • Replace Primary and Secondary Fuel Filters
  • Replace Axle Housing Oil
  • Replace Final Drives Oil
  • Replace Front Power Take-Off (PTO) Oil Filter
  • Replace Front PTO Oil

5,000-HOUR OFFERING

3,750 Hours

  • Lubricate All Grease Fittings
  • Replace Engine Oil and Filter
  • Replace Open Crankcase Ventilation Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Final Drives Oil
  • Replace Front Power Take-Off (PTO) Oil Filter

4,500 Hours

  • Replace Cab Recirculation Air Filter
  • Replace Cab Fresh Air Filter
  • Replace Engine Oil and Filter
  • Replace Primary Engine Air Filter
  • Replace Open Crankcase Ventilation Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Diesel Exhaust Fluid (DEF) Dosing Unit Filter
  • Replace Axle Housing Oil
  • Replace Final Drives Oil
  • Replace Front Power Take-Off (PTO) Oil Filter
  • Replace Front PTO Oil

1PowerGard Protection Plan with minimum terms equal to or greater than the months/hours of the desired John Deere Protect Plan must be purchased separately to be eligible for John Deere Protect extended service plans. Additional details are included in the selling description of each plan.

2PowerGard deductible applies to any failures under PowerGard coverage.

3Plan excludes diesel fuel and diesel exhaust fluid (DEF).

4For complete plan details, contact a participating dealer near you.

5Number of Scheduled Maintenance Events varies based on specific model and John Deere Protect plan. Please see your participating dealer for complete details.

6Daily maintenance items are not covered.

5E/5M Series Utility Tractors

5E/5M Series Utility Tractors

View Downloadable PDF

Buyers of new John Deere 5E/5M Series utility tractors (MY23 and newer) can now lock in annual maintenance costs1 and be in a better position to prevent downtime. It's all possible with John Deere Protect™. Available to customers who purchase a new 5E/5M tractor (MY23 and newer), John Deere Protect offers a plan that is designed to improve performance and efficiency and reduce costs.

You can buy the John Deere Protect Maintenance Plan when purchased in conjunction with a PowerGard™ Comprehensive Protection Plan.2

The John Deere Protect plan is designed to help you maintain original performance and keep your new John Deere 5E/5M tractor running for the first 36 months/1,500 engine hours (with no deductible3 and no additional charges).

MAINTENANCE PLAN

John Deere Protect Maintenance Plan4 includes:

  • 3 Annual Expert Inspections
  • 4 or 7 Scheduled Maintenance Events5

Minimum PowerGard Comprehensive coverage of 36 months/ 1,500 hours must be purchased to match the John Deere Protect plan desired. Longer PowerGard plans can be purchased if desired.

So what's included with each component of the John Deere Protect plan? Read on to learn how this valuable coverage helps you heighten 5E/5M tractor performance and productivity while keeping operating expenses in check.

Expert Inspections

The John Deere Protect Maintenance Plan includes three annual expert inspections to help make sure your 5E/5M tractor is ready to run. The 83-plus point inspection ensures that all critical areas of the tractor are evaluated by an expert technician from your local dealer and identifies potential problems to avoid costly, unplanned downtime. Coverage term is 36 months/1,500 engine hours.

Maintenance Events6

The John Deere Protect Maintenance Plan includes all of the recommended preventative maintenance at the required hour intervals to ensure your 5E/5M tractor is properly maintained for upcoming field work. Expert technicians perform all maintenance and use Genuine John Deere parts and fluids. See chart for maintenance schedule details. Coverage term is 36 months/1,500 engine hours.

To learn more about the benefits of John Deere Protect, contact a participating John Deere Dealer.

 

John Deere Protect Maintenance Schedule: 5050E, 5060E, 5067E, 5075E

Break-In

  • Clean, Lubricate, Grease (as required)
  • Replace Engine Oil and Filter
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter

250 Hours

  • Clean, Lubricate, Grease (as required)
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter

500 Hours

  • Clean, Lubricate, Grease (as required)
  • Replace Engine Oil and Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Axle Housing Oil
  • Replace Wheel Hub Oil

750 Hours

  • Clean, Lubricate, Grease (as required)
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter

1,000 Hours

  • Clean, Lubricate, Grease (as required)
  • Replace Cab Recirculation Air Filter
  • Replace Cab Fresh Air Filter
  • Replace Engine Oil and Filter
  • Replace Primary Engine Air Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Axle Housing Oil
  • Replace Wheel Hub Oil

1,250 Hours

  • Clean, Lubricate, Grease (as required)
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter

1,500 Hours

  • Clean, Lubricate, Grease (as required)
  • Replace Engine Oil and Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Transmission/Hydraulic Oil
  • Replace Axle Housing Oil
  • Replace Wheel Hub Oil

 

John Deere Protect Maintenance Schedule: 5090E, 5100E

Break-In

  • Clean, Lubricate, Grease (as required)
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter

500 Hours

  • Clean, Lubricate, Grease (as required)
  • Replace Engine Oil and Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Axle Housing Oil
  • Replace Wheel Hub Oil

1,000 Hours

  • Clean, Lubricate, Grease (as required)
  • Replace Cab Recirculation Air Filter
  • Replace Cab Fresh Air Filter
  • Replace Engine Oil and Filter
  • Fan Belt
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Axle Housing Oil
  • Replace Wheel Hub Oil

1,500 Hours

  • Clean, Lubricate, Grease (as required)
  • Replace Engine Oil and Filter
  • Replace Open Crankcase Ventilation Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Transmission/Hydraulic Oil
  • Replace Axle Housing Oil
  • Replace Wheel Hub Oil

 

John Deere Protect Maintenance Schedule: 5075M, 5095M, 5105M, 5120M, 5130M

Break-In

  • Clean, Lubricate, Grease (as required)
  • Replace Engine Oil and Filter (Only on 5075M)
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter

500 Hours

  • Clean, Lubricate, Grease (as required)
  • Replace Engine Oil and Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Axle Housing Oil
  • Replace Wheel Hub Oil

1,000 Hours

  • Clean, Lubricate, Grease (as required)
  • Replace Cab Recirculation Air Filter
  • Replace Cab Fresh Air Filter
  • Replace Engine Oil and Filter
  • Fan Belt
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Axle Housing Oil
  • Replace Wheel Hub Oil
  • Replace Front PTO Oil (if equipped)

1,500 Hours

  • Clean, Lubricate, Grease (as required)
  • Replace Engine Oil and Filter
  • Replace Open Crankcase Ventilation Filter
  • Replace Primary and Secondary Fuel Filters
  • Replace Transmission Oil Filter
  • Replace Hydraulic Oil Filter
  • Replace Transmission/Hydraulic Oil
  • Replace Axle Housing Oil
  • Replace Wheel Hub Oil

 

1Excludes diesel fuel and diesel exhaust fluid.

2PowerGard Comprehensive Protection Plan with a minimum term of 36 months/1,500 hours must be purchased separately to be eligible for John Deere Protect extended service plans. Additional details are included in the selling descriptions of each included plan.

3PowerGard deductible applies to any failures under PowerGard coverage.

4For complete plan details, contact a participating dealer near you.

5Number of Scheduled Maintenance Events varies based on specific model and John Deere Protect plan. Please see your participating dealer for complete details.

6Daily maintenance items are not covered.

400R/600R Series Sprayers

400R & 600R Series Sprayers

View Downloadable PDF

Customers who purchase new John Deere 400R and 600R Series sprayers (MY25 and newer) can now project annual maintenance costs1 and be in a better position to maximize uptime. It's all possible with John Deere Protect™, a plan designed to improve efficiency and effectiveness and reduce costs.

You can buy the John Deere Protect Maintenance Plan when purchased in conjunction with a PowerGard™ Protection Plan2. The John Deere Protect plan helps you maintain original performance on your new 400R or 600R sprayer for the first 36 Months/1000 or 1500 engine hours (with no deductible3 and no additional charges).

MAINTENANCE PLAN

The John Deere Protect Maintenance Plan4 includes:

  • 3 Annual Expert Inspections
  • 3 Annual Winterization Events
  • 4 or 6 Scheduled Maintenance Events5

Minimum PowerGard coverage must be equal to or greater than the months/hours of the John Deere Protect plan purchased. Longer PowerGard plans can be purchased if desired.

So what's included with each component of the John Deere Protect Plan? Read on to learn how this valuable coverage helps you heighten 400R and 600R sprayer performance and productivity while keeping operating expenses in check.

Expert Inspections

The John Deere Protect Maintenance Plan includes three annual expert inspections to help make sure your sprayer is ready to run. The 150-plus point inspection ensures that all critical areas of the tractor are evaluated by a dealer technician and identifies potential problems to maximize uptime. Coverage term is 36 Months/1000 or 1500 engine hours.

Winterization Events

John Deere Protect includes three annual winterization events to safeguard all of the wet components on your new John Deere Sprayer for the winter season. Dealer technicians will complete the winterization process to ensure the safe operation and longevity of your investment.

Maintenance Events6

The John Deere Protect Maintenance Plan includes all of the recommended preventative maintenance at the required hour intervals to ensure your sprayer is properly maintained for upcoming field work. Dealer technicians perform all maintenance and use Genuine John Deere parts and fluids. See chart for maintenance schedule details. Coverage term is 36 Months/1000 or 1500 engine hours.

To learn more about the benefits of John Deere Protect, contact a participating John Deere Dealer.

 

John Deere Protect Maintenance Schedule:

400R & 600R Series Sprayers

Break-In

  • Change Planetary Hub Oil
  • Grease: Service
  • Check Engine Oil Level
  • Check Coolant Level
  • Check Hydraulic Oil Level
  • Inspect Tires for Damage and Correct Inflation Pressure
  • Check Air Springs
  • Inspect Air Springs for Debris
  • Check Solution Tank Straps
  • Drain Water and Sediment from Water Separator
  • Drain Moisture From Onboard Air Tank
  • Tighten Wheel Hardware
  • Inspect and Adjust T3 Link, Shims, and T6/T7 Rope
  • Rinse Solution Pump, Flowmeter, and Boom
  • Clean Pressure Strainers
  • Lubricate Spindle Housing
  • Lubricate Suspension Assemblies
  • Lubricate Boom Lift Arm Pins

1st Maintenance

  • Change Planetary Hub Oil
  • Grease: Service
  • Check Engine Oil Level
  • Check Coolant Level
  • Check Hydraulic Oil Level
  • Inspect Tires for Damage and Correct Inflation Pressure
  • Check Air Springs
  • Inspect Air Springs for Debris
  • Check Tread Adjust Side Gap and Shim Gap
  • Check Solution Tank Straps
  • Check Torque on Fixed Tread and Adjust Hardware
  • Inspect Service Brake Components
  • Inspect Tires for Uneven Wear
  • Batteries: Service
  • Drain Water and Sediment from Water Separator
  • Drain Moisture From Onboard Air Tank
  • Tighten Wheel Hardware
  • Inspect and Adjust T3 Link, Shims, and T6/T7 Rope
  • Rinse Solution Pump, Flowmeter, and Boom
  • Clean Pressure Strainers
  • Lubricate Spindle Housing
  • Lubricate Suspension Assemblies
  • Lubricate Boom Lift Arm Pins
  • Lubricate Steering Cylinder Ball Joints
  • Lubricate Driveshaft U-Joints

2nd Maintenance

  • Change Engine Oil and Filter
  • Change Primary Engine Air Filter Element
  • Change Secondary Engine Air Filter Element
  • Change Planetary Hub Oil
  • Replace Fuel Filters
  • Replace Cab Air Filters
  • Change Cab Recirculation Air Filter
  • Replace Air Compressor Air Dryer Cartridge
  • Grease: Service
  • Check Coolant Level
  • Check Hydraulic Oil Level
  • Inspect Tires for Damage and Correct Inflation Pressure
  • Check Air Springs
  • Inspect Air Springs for Debris
  • Check Tread Adjust Side Gap and Shim Gap
  • Check Solution Tank Straps
  • Check Torque on Fixed Tread and Adjust Hardware
  • Inspect Tires for Uneven Wear
  • Batteries: Service
  • Inspect Seat Belts
  • Remove and Inspect Service Brake Components
  • Inspect Hydro Isolators
  • Check Front Axle Toe-In
  • Inspect Boom Pivot Bushings
  • Drain Water and Sediment from Water Separator
  • Drain Moisture From Onboard Air Tank
  • Inspect and Replenish High Flow Spray Pump Seal Chamber Fluid
  • Tighten Wheel Hardware
  • Inspect and Adjust T3 Link, Shims, and T6/T7 Rope
  • Rinse Solution Pump, Flowmeter, and Boom
  • Clean Pressure Strainers
  • Clean Engine Vent Tube
  • Clean Sprayer and Coat Exposed Surfaces
  • Lubricate Spindle Housing
  • Lubricate Suspension Assemblies
  • Lubricate Boom Lift Arm Pins
  • Lubricate Steering Cylinder Ball Joints
  • Lubricate Driveshaft U-Joints

3rd Maintenance

  • Change Planetary Hub Oil
  • Grease: Service
  • Check Engine Oil Level
  • Check Coolant Level
  • Check Hydraulic Oil Level
  • Inspect Tires for Damage and Correct Inflation Pressure
  • Check Air Springs
  • Inspect Air Springs for Debris
  • Check Tread Adjust Side Gap and Shim Gap
  • Check Solution Tank Straps
  • Check Torque on Fixed Tread and Adjust Hardware
  • Inspect Service Brake Components
  • Inspect Tires for Uneven Wear
  • Batteries: Service
  • Check Engine Speeds
  • Test Coolant
  • Drain Water and Sediment from Water Separator
  • Drain Moisture From Onboard Air Tank
  • Tighten Wheel Hardware
  • Inspect and Adjust T3 Link, Shims, and T6/T7 Rope
  • Rinse Solution Pump, Flowmeter, and Boom
  • Clean Pressure Strainers
  • Lubricate Spindle Housing
  • Lubricate Suspension Assemblies
  • Lubricate Boom Lift Arm Pins
  • Lubricate Steering Cylinder Ball Joints
  • Lubricate Driveshaft U-Joints

4th Maintenance

  • Change Engine Oil and Filter
  • Change Primary Engine Air Filter Element
  • Change Secondary Engine Air Filter Element
  • Change Planetary Hub Oil
  • Replace Fuel Filters
  • Replace Cab Air Filters
  • Change Cab Recirculation Air Filter
  • Replace Air Compressor Air Dryer Cartridge
  • Replace Hydrostatic and Hydraulic Filters
  • Replace Hydraulic Reservoir Fill Cap
  • Change Hydraulic Oil
  • Grease: Service
  • Check Coolant Level
  • Inspect Tires for Damage and Correct Inflation Pressure
  • Check Air Springs
  • Inspect Air Springs for Debris
  • Check Tread Adjust Side Gap and Shim Gap
  • Check Solution Tank Straps
  • Check Torque on Fixed Tread and Adjust Hardware
  • Inspect Tires for Uneven Wear
  • Batteries: Service
  • Inspect Seat Belts
  • Remove and Inspect Service Brake Components
  • Inspect Hydro Isolators
  • Check Front Axle Toe-In
  • Inspect Boom Pivot Bushings
  • Drain Water and Sediment from Water Separator
  • Drain Moisture From Onboard Air Tank
  • Inspect and Replenish High Flow Spray Pump Seal Chamber Fluid
  • Tighten Wheel Hardware
  • Inspect and Adjust T3 Link, Shims, and T6/T7 Rope
  • Rinse Solution Pump, Flowmeter, and Boom
  • Clean Pressure Strainers
  • Clean Engine Vent Tube
  • Clean Sprayer and Coat Exposed Surfaces
  • Clean Autotrac Strainer
  • Lubricate Spindle Housing
  • Lubricate Suspension Assemblies
  • Lubricate Boom Lift Arm Pins
  • Lubricate Steering Cylinder Ball Joints
  • Lubricate Driveshaft U-Joints

5th Maintenance

  • Change Engine Oil and Filter
  • Change Primary Engine Air Filter Element
  • Change Secondary Engine Air Filter Element
  • Change Planetary Hub Oil
  • Replace Fuel Filters
  • Replace Cab Air Filters
  • Change Cab Recirculation Air Filter
  • Replace Air Compressor Air Dryer Cartridge
  • Change Hydraulic Oil
  • Replace Open Crankcase Ventilation Filter
  • Grease: Service
  • Check Coolant Level
  • Check Hydraulic Oil Level
  • Inspect Tires for Damage and Correct Inflation Pressure
  • Check Air Springs
  • Inspect Air Springs for Debris
  • Check Tread Adjust Side Gap and Shim Gap
  • Check Solution Tank Straps
  • Check Torque on Fixed Tread and Adjust Hardware
  • Inspect Tires for Uneven Wear
  • Batteries: Service
  • Inspect Seat Belts
  • Remove and Inspect Service Brake Components
  • Inspect Hydro Isolators
  • Check Front Axle Toe-In
  • Inspect Boom Pivot Bushings
  • Check Engine Speeds
  • Check Fan Belt Tensioner
  • Test Coolant
  • Drain Water and Sediment from Water Separator
  • Drain Moisture From Onboard Air Tank
  • Inspect and Replenish High Flow Spray Pump Seal Chamber Fluid
  • Tighten Wheel Hardware
  • Inspect and Adjust T3 Link, Shims, and T6/T7 Rope
  • Rinse Solution Pump, Flowmeter, and Boom
  • Clean Pressure Strainers
  • Clean Engine Vent Tube
  • Clean Sprayer and Coat Exposed Surfaces
  • Lubricate Spindle Housing
  • Lubricate Suspension Assemblies
  • Lubricate Boom Lift Arm Pins
  • Lubricate Steering Cylinder Ball Joints
  • Lubricate Driveshaft U-Joints

 

1Excludes diesel fuel and diesel exhaust fluid.

2PowerGard Protection Plan with minimum terms equal to or greater than the months/hours of the desired John Deere Protect Plan must be purchased separately to be eligible for John Deere Protect extended service plans. Additional details are included in the selling description of each plan.

3PowerGard deductible applies to any failures under PowerGard coverage.

4For complete plan details, contact a participating dealer near you.

5Number of Scheduled Maintenance Events varies based on specific model and John Deere Protect plan. Please see your participating dealer for complete details.

6Daily maintenance items are not covered.