2720Disk Ripper
- Bury residue to 15-in. (38.1 cm) depths
- Improved residue flow in wet conditions
- The most level soil profile from a ripper
- Exclusive hydraulic rolling basket option
Specifications | ||||
---|---|---|---|---|
Select up to 4 models to compare specifications | John Deere 2720 Disk Ripper |
Working width | 3.8-8.4 m 12.5-27.5 ft |
|||
---|---|---|---|---|
Transport width | With furrow filler attachment: 5.2-5.6 m 16.9-18.4 ft |
|||
Maximum operating depth | 40.6 cm 16 in. |
|||
Operating speed | 8-11.3 km/h 5-7 mph |
|||
Horsepower required per standard | 66-75.6 kW 41-47 hp |
|||
Standards | Spacing 76.2 cm 30 in. |
Configuration | Disk - Ripper - Disk - Conditioner | |||
---|---|---|---|---|
Option 1 | Rigid 5-standard on spacing of 76.2 cm 30 in. |
|||
Option 2 | Rigid 7-standard on spacing of 76.2 cm 30 in. |
|||
Option 3 | Gang-fold rigid 7-standard on spacing of 76.2 cm 30 in. |
|||
Option 4 | 3-section flex-fold 9-standard on spacing of 76.2 cm 30 in. |
|||
Option 5 | 3-section flex-fold 11-standard on spacing of 76.2 cm 30 in. |
|||
Option 6 | ||||
Option 7 | ||||
Option 8 | ||||
Option 9 | ||||
Option 10 | ||||
Option 11 | ||||
Option 12 | ||||
Option 13 | ||||
Option 14 | ||||
Option 15 | ||||
Option 16 | ||||
Option 17 |
Option 1 | 3.8 m 12.5 ft |
|||
---|---|---|---|---|
Option 2 | 5.3 m 17.5 ft |
|||
Option 3 | 5.3 m 17.5 ft |
|||
Option 4 | 6.9 m 22.5 ft |
|||
Option 5 | 8.4 m 27.5 ft |
|||
Option 6 | ||||
Option 7 | ||||
Option 8 | ||||
Option 9 | ||||
Option 10 | ||||
Option 11 | ||||
Option 12 | ||||
Option 13 | ||||
Option 14 | ||||
Option 15 | ||||
Option 16 | ||||
Option 17 |
Option 1 | With furrow filler attachment: 5.2 m 16.9 ft |
|||
---|---|---|---|---|
Option 2 | With furrow filler attachment: 6.8 m 22.4 ft |
|||
Option 3 | With furrow filler attachment: 5.5 m 18 ft |
|||
Option 4 | With furrow filler attachment: 5.6 m 18.4 ft |
|||
Option 5 | With furrow filler attachment: 5.6 m 18.4 ft |
|||
Option 6 | ||||
Option 7 | ||||
Option 8 | ||||
Option 9 | ||||
Option 10 | ||||
Option 11 | ||||
Option 12 | ||||
Option 13 | ||||
Option 14 | ||||
Option 15 | ||||
Option 16 | ||||
Option 17 |
Maximum operating depth | 40.6 cm 16 in. |
---|
Standard | 25.4 cm 10 in. |
---|
Maximum | 95.25 cm 37.5 in. |
---|
Operating speed | 8-11.3 km/h 5-7 mph |
---|
Horsepower required per standard | 66-75.6 kW 41-47 hp |
---|
Option 1 | Single-point crank | |||
---|---|---|---|---|
Option 2 | TruSet™ tillage |
Option 1 | 2 SCVs (depth control, optional rolling baskets) at 17,237 kPa 2,500 psi for optimum raise times |
|||
---|---|---|---|---|
Option 2 | 3 SCVs (depth control, wingfold, optional rolling baskets) at 17,237 kPa 2,500 psi for optimum raise times |
Design | Single hitch tube: 15.2x25.4 cm 6x10 in. |
|||
---|---|---|---|---|
Fore-aft adjustment | Hitch turnbuckle |
Spacing | 76.2 cm 30 in. |
|||
---|---|---|---|---|
Frame cross section |
Trip force | Cushion-trip standard: 1,859.7 kg 4,100 lb |
|||
---|---|---|---|---|
Trip height | Shear bolt protected above: 33 cm 13 in. |
|||
Type | Parabolic with or without wear shins, straight with wear shins |
Trip force | ||||
---|---|---|---|---|
Trip height | ||||
Type |
Trip force | ||||
---|---|---|---|---|
Trip height | ||||
Type |
Type | Wingless, LaserRip™ II points: 12.7 cm 5 in. 17.8 cm 7 in. 25.4 cm 10 in. |
|||
---|---|---|---|---|
Coverboards | Parabolic cushion-trip standards with wear shins and holes to mount coverboards | |||
Wear shin |
Description | Disk - Shank - Disk configuration | |||
---|---|---|---|---|
Depth control | TruSet in-cab controls Single-point depth control |
|||
Maximum depth | 15.2 cm 6 in. |
|||
Type of standard | C-spring | |||
Base equipment blades | Solid spherical low-concavity disk blades: 610x6.5 mm 24x0.256 in. |
|||
Blade spacing | 27.9 cm 11 in. |
|||
Front frame angle | Fixed: 18 degree (angle) | |||
Rear frame angle | 14-16 degree (angle) | |||
Spools | ||||
Bearings | Sealed, maintenance-free | |||
Scraper | Heavy-duty floating combination scraper (base option) |
Description | ||||
---|---|---|---|---|
Adjustments | ||||
Type of standard | ||||
Base equipment blades | ||||
Bearings |
Type | Tandem walk-over wheels options dependent on configuration (4)11L-15 FI D LR tires (4)340/65R18 Goodyear® tires (4)340/65R18 Michelin® tires |
---|
Type | Walk-Over tandem wheels, 57.2-mm (2.25-in.) diameter plug-in spindles and bolt hubs |
---|
Type |
---|
Option 1 | ||||
---|---|---|---|---|
Option 2 | ||||
Option 3 | ||||
Option 4 | ||||
Option 5 | ||||
Option 6 | ||||
Option 7 | ||||
Option 8 | ||||
Option 9 | ||||
Option 10 | ||||
Option 11 | ||||
Option 12 | ||||
Option 13 | ||||
Option 14 | ||||
Option 15 | ||||
Option 16 | ||||
Option 17 |
Option 1 | Hydraulically adjustable finishing attachments Knife-edge rolling basket Round-bar rolling basket |
|||
---|---|---|---|---|
Option 2 | ||||
Option 3 | ||||
Option 4 | ||||
Option 5 |
Date collected |
---|