HH50HH50 Heavy Harrow Tillage Tools
- Break up and evenly spread straw residue
- Work at speeds up to 19.3 km/h
- Drop-out tine replacement for easy maintenance
- Flexible sections maintain even ground contact
Features
Expand All
Collapse All
HH70 Five-Bar model
HH70 Five-Bar model
Match acreage and power requirements with a variety of working widths
HH70 Five-Bar model
The Heavy Harrow is available in sizes ranging from 15.2 m to 25 m (50 ft to 82 ft). Power requirements range from 111.9 kW to 354.2 kW (150 hp to 475 hp).
Model |
Category |
Minimum engine power requirement |
15.2 m (50 ft), five bar |
4 |
111.9 kW (150 hp) |
15.2 m (50 ft), seven bar |
4 |
223.7 kW (300 hp) |
21.3 m (70 ft), five bar |
4 |
149.1 kW (200 hp) |
21.3 m (70 ft, seven bar |
5 |
298.3 kW (400 hp) |
25 m (82 ft), five bar |
4 |
223.7 kW (300 hp) |
25 m (82 ft), seven bar |
5 |
354.2 kW (475 hp) |
NOTE: Power requirement is dependent on field conditions and tine angle.
Easy adjustment and maintenance with Heavy Harrow tine configurations
HH70 Five-Bar model
The Heavy Harrow is available in either a five-row configuration with 66-cm x 1.6-cm (26-in. x 5/8-in.) tines or a seven-row configuration with 66-cm x 1.3-cm (26-in. x 1/2-in.) tines. Both configurations have tungsten carbide Endura-Tip tines.
- Easily replace tines by removing a few bolts and easily dropping out the tine bar.
- Tine adjustment is simple with either mechanical or hydraulic adjust options.
- The seven-row configuration offers approximately 68 percent more ground coverage in the field over the five-row configuration.
-
2430CNutrient Applicator -
2510H with DryHigh-Speed Application with Dry Nutrient Attachment -
2510LLiquid Fertilizer Applicator -
2530LNutrient Applicator -
DA159T Dry Nutrient Attachment -
DA15for 9T Dry Nutrient Attachment
-
DA15Disk Applicator
-
DA169T Dry Nutrient Attachment
-
DA16for 9T Dry Nutrient Attachment
-
DA16Disk Applicator
-
DA23Disk Applicator
-
HSD15High Speed Disk -
HSD19High Speed Disk -
HSD22High Speed Disk -
HSD25 2SHigh Speed Disk -
ST12 Strip-Till Solution -
ST16 Strip-Till Solution -
ST18 Drawn Strip-Till Solution