TM11 SeriesTandem Disk Harrows
- Notched Front & Rear Blades
- Easy Gang Angle Adjustments
- Rear Hitch Included
- iMatch™ Quick Attach Compatible
Specs & Compare | ||||
---|---|---|---|---|
John Deere TM11 Series Tandem Disk Harrows |
Working Width | 64 in. | |||
---|---|---|---|---|
Overall Width, in. (cm) | 67 (170.2) in. | |||
Overall Height, in. (cm) | 38 (96.5) in. | |||
Overall Length, in. (cm) | 57 (144.8) in. | |||
Height to Hitch Pins, in. (cm) |
Disk Spacing | 9 in. | |||
---|---|---|---|---|
Disk Thickness | 3 mm (0.118 In.) | |||
Disk Diameter, in. (cm) | 18 (45.7) | |||
Number of Disks | 16 | |||
Front Gang Blade Type | Notched | |||
Rear Gang Blade Type | Notched | |||
Notched (front) / Notched (rear) | ||||
Notched (front) / Smooth (rear) |
Operating Weight | 684 lb | |||
---|---|---|---|---|
Shipping Weight | 755 lb | |||
Weight per Disc (Approx.), lb (kg) | 43 (19.5) | |||
Net | ||||
Weight per disk blade |
Engine HP Range (kW) | 35-75 (26.1-55.9) | |||
---|---|---|---|---|
Engine HP Requirements | ||||
Recommended PTO hp range | ||||
Recommended drawbar hp range |
Category | Category I | |||
---|---|---|---|---|
iMatch / Quick hitch | Yes | |||
Type | Clevis with Pin | |||
Height to Hitch Pins, in. (cm) | 18 (45.7) | |||
Bolt-on rear hitch | ||||
Front hitch type | ||||
Style |
Diameter, in. | 1 | |||
---|---|---|---|---|
Type | Square | |||
Material |
Front Gang Angles | 0,7,14,21 Degrees | |||
---|---|---|---|---|
Rear Gang Angles | 0,5,12,19 Degrees | |||
Adjustment | Tool-less |
Gang / Frame Tubing | 2x3 rectangle with end caps |
---|
Bearing type | Self Aligning Sealed Ball Bearing in Pre-Riveted Flange | |||
---|---|---|---|---|
Material Thickness |
Date collected |
---|
Blade option five | ||||
---|---|---|---|---|
Blade option four | ||||
Blade option one | ||||
Blade option six | ||||
Blade option three | ||||
Blade option two |
Axle Diameter, in. | ||||
---|---|---|---|---|
Blade Spacing | ||||
Blade Thickness | ||||
Disc Diameter, in. (cm) | ||||
Front Gang Angles | ||||
Front Gang Blade Type | ||||
Gang / Frame Tubing | ||||
Number of Blades | ||||
Rear Gang Angles | ||||
Rear Gang Blade Type |
Blade concavity | ||||
---|---|---|---|---|
Quantity | ||||
Spacing | ||||
Type |
Axle material | ||||
---|---|---|---|---|
Axle size | ||||
Bearing standards | ||||
Bearing type | ||||
Bearing wear plates | ||||
Front angle | ||||
Furrow fillers | ||||
Rear angle | ||||
Scrapers |
Duty | ||||
---|---|---|---|---|
Tube size | ||||
Type |
Approximate working width | ||||
---|---|---|---|---|
Disk blades | ||||
Frame | ||||
Notched (front) Notched (rear) | ||||
Recommended drawbar hp range | ||||
Transport - Width |
Lights | ||||
---|---|---|---|---|
Markings | ||||
Safety tow chain |
Approximate Assembly Time | ||||
---|---|---|---|---|
Furrow Filler Kit | ||||
Labor hours | ||||
Rolling Basket | ||||
Scraper Kit |
Size | ||||
---|---|---|---|---|
Type | ||||
Wheel hub type |
Ground clearance with base blades | ||||
---|---|---|---|---|
Height | ||||
Length | ||||
Wheel hub bearings | ||||
Width |
Time period |
---|
Approximate working width | ||||
---|---|---|---|---|
Maximum penetration |