FL10 SeriesFlail Mowers
- Fixed position
- Handle brush and turf grass
- Sharp knives reduce material size
- Leaves finished look
Specs & Compare | ||||
---|---|---|---|---|
John Deere FL10 Series Flail Mowers |
Capacity, Cutting (in.) | 0.75 in. | |||
---|---|---|---|---|
Height, Cutting (in.) | .78 /1.57 /2.36 in. | |||
Height, Overall (in.) | 31.2 in. | |||
Length, Overall (in.) | 32 in. | |||
Width, Cutting (in) | 61 in. | |||
Width, Overall (in.) | 68.16 in. | |||
Weight (lbs.) | 505 lb |
Tractor HP Required (min. - max.) | 25 - 45 hp | |||
---|---|---|---|---|
Tractor Weight MINIMUM (lbs.) | 1550 lb | |||
COG (in) | 15 in. |
Hitch Type | 3-point | |||
---|---|---|---|---|
iMatch Compatible | No | |||
Hitch Category | 1 | |||
Hitch Position | Fixed Centered | |||
Offset Range | No | |||
Hydraulic Offset | No |
Blade Type | Hammers (std); Y-Blade (service) | |||
---|---|---|---|---|
Number of Hammers | 32 | |||
Type of Blades/ Hammers | 19 / 21 | |||
Blade Tip Speed (ft/min) | 8622 ft |
Rotor Diameter (in.) | 5 in. | |||
---|---|---|---|---|
Rotor Speed (rpm) | 2600 rpm | |||
Rotor Thickness (mm.) | 8 mm | |||
Rotor Work Diameter (in.) | 12.63 in. | |||
Rotor Bearing Type | SPHERICAL ROLLER 22207 |
Gear Box Speed (rpm) | 540 rpm | |||
---|---|---|---|---|
Drive Belts | 2 - SPB Lp=1160 | |||
Gauge Roller Diameter (in.) | 5.5 in. |
Hydraulic Quick Coupler Size (in.) | 1/2 in. | |||
---|---|---|---|---|
Frame Thickness (mm.) | 3 mm | |||
Side Frame Thickness (mm.) | 4 mm | |||
Roller Bearing Diameter (in) | 2.4 in. | |||
Rear Roller Bearing Type | D30 D62 B20 2206E 2RS1 | |||
Belt adjustment | Screw adjustment | |||
Primary Pulley Diameter (mm.) | 225 mm | |||
Secondary Pulley Diameter (mm.) | 140 mm | |||
Hood Height (in.) | 15.35 in. | |||
Side Case Height (in.) | 25.2 in. | |||
PTO Yoke Height (in.) | 18.66 in. |
Manufacturing location | ||||
---|---|---|---|---|
Date collected |
Images of equipment models may be digitally or AI generated, are for illustration purposes only, and are subject to change. Equipment models shown are typically base models and may not reflect the actual product, features, options, or attachments. Equipment availability may be limited. See your John Deere dealer for additional information.