FA 20Flex Cutting Platform
- Epicyclic knife drive increases drive capacity
- Raised-height skid shoe
- Less reel, mounting, and drive parts
- HydraFlex™ float system improves operator control
Specifications | ||||
---|---|---|---|---|
Select up to 4 models to compare specifications | John Deere FA 20 Flex Cutting Platform |
Overall width | 6.6 m 21.7 ft |
|||
---|---|---|---|---|
Cutterbar length | 6.1 m 20 ft |
|||
Flex cutterbar float range | 152 mm 6 in. |
|||
Tilt adjustment | Located on feederhouse: 17 degree (angle) | |||
Height control | Hydraulic | |||
Speed control | Hydraulic |
Type | Auger |
---|
Type | Knife system with in-line gearbox: 102 mm 4 in. |
|||
---|---|---|---|---|
Cutterbar angle | 10 degree (angle) | |||
Cutterbar length | 6.1 m 20 ft |
|||
Flex cutterbar float range | 152 mm 6 in. |
|||
Tilt adjustment | Located on feederhouse: 17 degree (angle) | |||
Knife sections | Heavy-duty, over-serrated | |||
Guards | Forged steel, heat-treated | |||
Backshaft speed | 490 rpm | |||
Knife speed | 520 cycles/min |
Diameter | 66 cm 26 in. |
|||
---|---|---|---|---|
Operating speed | Slow down: 135, 152 rpm Speed up: 170 rpm |
Number for slats | Six | |||
---|---|---|---|---|
Diameter | 1.067 m 3.5 ft |
Height control | Hydraulic | |||
---|---|---|---|---|
Speed control | Hydraulic | |||
Operating speeds | 6 to 44 rpm |
Reel motor displacement (per revolution) | ||||
---|---|---|---|---|
Reel drive system pressure | 14,000 (+/- 1,000) kPa 2,000 (+/- 150) psi |
|||
Reel fore/aft stroke | 359 mm 14.1 in. |
Cutting width | 6.1 m 20 ft |
|||
---|---|---|---|---|
Gathering width | 6.12 m 20.1 ft |
|||
Overall width | 6.6 m 21.7 ft |
|||
Approximate weight | 1,788 kg 3,942 lb |
Date collected |
---|