6700APrecisionCut™ Fairway Mower
- 24.7 hp FT4 compliant Liquid-Cooled Diesel Engine
- 22” QA7 Cutting Units for a 100” total Width of Cut
- 3-wheel, smooth tire configuration with standard GRIP All-Wheel Drive
- Passcode-protected TechControl display
Specs & Compare | ||||
---|---|---|---|---|
Select up to 4 models to compare specifications | John Deere 6700A PrecisionCut™ Fairway Mower |
Maximum rated horsepower | At 3000 rpm: 24.7 hp (18.4 kW) High idle 3200 rpm |
|||
---|---|---|---|---|
Drive pump | Axial piston, electronically controlled hydrostatic traction pump; dual gear pumps for steering, lift, mow, and charge | |||
Ground pressure | 69 kPa 10 psi |
|||
Throttle | Hand throttle | |||
Operator display | TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected | |||
Mowing speed | 0 to 12.8 km/h 0 to 8.0 mph |
|||
Cutting unit size | Quick Adjust QA5: 55.9 cm 22 in. |
|||
Total width of cut | 254 cm 100 in. |
|||
Reel diameter | 17.8 cm 7 in. |
|||
Frequency of clip (FOC Reels) OR Blade tip speed (decks) | 10- Blade: 1.04 mm/km/h 10- Blade: 0.066 in./mph 8-Blade: 1.30 mm/km/h 8-Blade: 0.083 in./mph |
Type | Indirect Inject Diesel | |||
---|---|---|---|---|
Compliant emission regulation | United States and Canada Final Tier 4, EU Stage V | |||
Horsepower | Maximum rated horsepower At 3000 rpm: 24.7 hp (18.4 kW) High idle 3200 rpm |
|||
Cylinders | Three | |||
Displacement | 1.267 L 77.32 cu in. |
|||
Air cleaner | 2-stage dry element | |||
Fuel | Diesel Up to B20 compliant | |||
Cooling system | Liquid centrifugal pump; forward machine location for optimum cooling |
Traction drive | ||||
---|---|---|---|---|
Drive pump | Axial piston, electronically controlled hydrostatic traction pump; dual gear pumps for steering, lift, mow, and charge | |||
Cutting units drive | ||||
Hydraulic system capacity | 37.8 L 10 U.S. gal. |
|||
Fuel tank capacity | 60.6 L 16 U.S. gal. |
|||
Steering | Hydraulic power with double acting steering cylinder | |||
Front drive tires | 26.5x14-12 smooth | |||
Steering tires | 24x13-12 smooth | |||
Ground pressure | 69 kPa 10 psi |
|||
Brakes | Internal hydraulic wet disc brakes with dynamic braking through closed loop hydrostatic system | |||
ROPS | Standard; meets ISO 21299 Standard |
Cutting units lowered | 1181 kg 2598 lb Canopy, FTCs and Power Brushes installed, full fuel |
---|
Throttle | Hand throttle | |||
---|---|---|---|---|
Forward/reverse | 2-pedal electronic control of eHydro system |
|||
Mower lift | One-touch single handle | |||
Parking brake | Electric Switch on Command Arm for Internal Wet Disk Brakes | |||
Seat | Suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment | |||
PTO | Electric Switch on Command Arm | |||
Ignition | ||||
Work lights | ||||
Tilt steering | Left Foot operated for easy adjustment | |||
Operator display | TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected | |||
Storage | Cup holder; two-way radio; large operator storage located on left hand side of operator station |
Height with ROPS | 217.3 cm 85.6 in. |
|||
---|---|---|---|---|
Length | 307.2 cm 121 in. |
|||
Transport width | 219 cm 86.2 in. |
|||
Mowing position width | 287 cm 113 in. |
|||
Wheelbase | ||||
Ground speed | Mowing 0 to 12.8 km/h 0 to 8.0 mph 4WD mow speed N/A Transport 0 to 16.1 km/h 0 to 10.0 mph Reverse 0 to 9.7 km/h 0 to 6.0 mph |
Number | Five | |||
---|---|---|---|---|
Size | Quick Adjust QA5: 55.9 cm 22 in. |
|||
Total width of cut | 254 cm 100 in. |
|||
Height of cut | Construction 6.3 to 50.8 mm 0.25 to 2 in. |
|||
Frequency of clip (FOC Reels) OR Blade tip speed (decks) | Rollers Front and rear: 76.2 mm 3 in. at 1600 reel speed (engine high idle) - 10- Blade: 1.04 mm/km/h 10- Blade: 0.066 in./mph 8-Blade: 1.30 mm/km/h 8-Blade: 0.083 in./mph |
|||
Reel diameter | 17.8 cm 7 in. |
|||
Bedknife adjustment | ||||
Backlapping |
Operator ear full engine | ||||
---|---|---|---|---|
Operator ear reduced engine rpm (2300 rpm) | ||||
Measuring standard | ISO 11201 | |||
Attachments installed | FTCs, reels engaged |
Actual Fuel usage will vary depending on course conditions, operation, turf and fuel quality |
---|
Type | Two-year limited |
---|
Type | ANSI B71.4-2012 |
---|
Date collected |
---|