Whether the operator is new or experienced to loader operations, it requires skill to maintain an even load and reduce the amount of material lost. With the MSL loader offering for 1 Family, 2 Family, 3D, and 3E Tractors, anyone can operate their loader with ease and confidence. With the MSL loader, you will notice:
This loader is the first of its kind in North America for Compact Utility Tractors and can make any loader task easier and quicker to accomplish.
300E MSL Loader
Leveling linkage on top of boom and flag pins used in pivot
300E MSL Loader
End-of-pin lubrication
Closeup of grease fitting
Grease points
All pivot points on the loader have grease fittings that are accessible from the side of the loader to make greasing the loader much easier, ensuring that all grease points are more likely to be serviced. No more searching for grease points that are hard to find. Removing the grease gun from the grease fitting is not a problem as a sufficient radius has been left to allow the grease gun tip to be rotated to the side for removal from the fitting.
Quick-change attachment carrier
Quick-change attachment
The quick-change attachment carrier allows for fast, easy removal and mounting of attachments without tools.
With the BW15872 parking stand kit, the 300E Loader can be quickly and easily removed from the tractor without tools.
Similarly, the BW16127 parking stand kit allows for the 400E Loader to be parked from the tractor.
Instructions for attaching the loader
Instructions for detaching the loader
The kit includes the following:
Parking stand installed
Quick disconnect connected
Boom pins installed
With the new MSL, check out how we are bringing large tractor technology down to our small tractors. The 20% to 40% greater lift capacity (depending on loader model) at 19.7-in. (500 mm) ahead of pivot when compared to our non self-leveling (NSL) loaders is well grounded too1. The option is available on John Deere 1 Series, 2 Series, 3D and 3E Tractors with John Deere 120R, 220R and 300E Loaders. Dig in. Get all in the details.2
This loader option starts level and stays level from start to finish. The 20% to 40% greater lift capacity when compared to our non self-leveling (NSL) loaders is well grounded too. The option is available on John Deere 1 Series, 2 Series, 3D and 3E Tractors with John Deere 120R, 220R and 300E Loaders.1
| Specs & Compare | ||||
|---|---|---|---|---|
| Select up to 4 models to compare specifications | John Deere 300E Loader |
| Maximum lift height (A) | 2140 mm 84 in. |
|||
|---|---|---|---|---|
| Lift capacity at full height | Measured at pivot (U) 539 kg 1186 lb Measured at 500 mm ahead of pivot (V) 384 kg 845 lb |
|||
| Boom breakout force | Measured at pivot (Y) 760 kg 1704 lb Measured at 500 mm ahead of pivot (Z) 537 kg 1204 lb |
|||
| Bucket rollback force capacity | At ground-level line (ZZ) 634 kg 1422 lb |
|||
| Clearance at full height - bucket dumped (C) | 1596 mm 63 in. |
|||
| Dump angle, degrees (E) | 43.8 degree (angle) | |||
| Rollback angle, degrees (G) | 31.4 degree (angle) |
| Model | 3025E, 3032E, 3038E | |||
|---|---|---|---|---|
| Front tire | 25x8.50-14 4PR R4 | |||
| Rear tire | 15.00-19.5 4PR | |||
| Front axle configuration | ||||
| Wheelbase | 1595 mm 62.8 in. |
|||
| Pump capacity | 5.3 gpm | |||
| Rated pressure | 2495 psi |
| Base weight | 306.4 kg | |||
|---|---|---|---|---|
| Leveling configuration | ||||
| Bucket used | Materials - 1550 mm | |||
| Bucket weight | 93 kg 205 lb |
|||
| Lift capacity at full height | Measured at pivot (U) 539 kg 1186 lb Measured at 500 mm ahead of pivot (V) 384 kg 845 lb |
|||
| Lift capacity at 59 in. (1500 mm) | Measured at pivot (W) 588 kg 1294 lb Measured at 500 mm ahead of pivot (X) 444 kg 977 lb |
|||
| Boom breakout force | Measured at pivot (Y) 760 kg 1704 lb Measured at 500 mm ahead of pivot (Z) 537 kg 1204 lb |
|||
| Bucket rollback force capacity | At maximum height (VV) 639 kg 1433 lb At 59-in. (1500-mm) lift height (XX) 809 kg 1814 lb At ground-level line (ZZ) 634 kg 1422 lb |
|||
| Dimensions | Maximum lift height (A) 2140 mm 84 in. At full height - bucket level(B) 1979 mm 78 in. At full height - bucket dumped (C) 1596 mm 63 in. |
|||
| Overall length (I+F), ft (m) | 2.9 m 9.5 ft |
|||
| Overall height in carry position (J) | 161 mm 6 in. |
|||
| Digging depth (H) | 131 mm 5 in. |
|||
| Reach | At maximum height (D) 603 mm 24 in. At ground level - bucket level (F) 1369 mm 54 in. |
|||
| Bucket angle | Dump angle, degrees (E) 43.8 degree (angle) Rollback angle, degrees (G) 31.4 degree (angle) Dump angle, ground 122 degree (angle) |
|||
| Cycle times | Loader raise, seconds 3.31 seconds Loader lower, seconds 2.75 seconds Bucket dump, seconds 1.75 seconds Bucket rollback, seconds 1.88 seconds |
| Date collected |
|---|
