- Specialty Tractors (75-155 Engine HP)
- Utility Tractors (22.4 - 140 Engine HP)
- Utility Tractor Attachments & Implements
- Home & Workshop Products
QuikTrak™ Mowers use a heavy-duty hydrostatic pump and wheel-motor drive system that gives reliable and consistent performance and long life:
Two Hydro-Gear™ 0.73-cu in. (12-cc) axial piston, variable displacement pumps provide hydraulic power to the wheel motors:
Two individual 15-cu in. (245.8-cc) piston wheel motors power the QuikTrak drive wheels. Their heavy-duty construction and super-efficient axial-piston design provides superior performance and seamless power to the wheels:
A spin-on type replaceable hydraulic oil filter is conveniently located:
A hydraulic fluid oil reservoir is located behind the leaning pad:
Transmission tow valves are provided on each hydrostatic pump to permit moving the QuikTrak without the engine running.
Hydro-Gear is a U.S.-registered trademark of Hydro-Gear Company.
A commercial-quality 22-hp* (16.4-kW) at 3600 rpm air-cooled engine powers the QuikTrak™ Mower:
*The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s Web site for additional information.
Engine is equipped with a replaceable oil filter for longer engine life.
Engine oil fill/check tube, oil filter, and oil drain are located close together for easy and convenient service.
A well-designed mower deck can make the difference between just getting the job done and getting eye-catching results. The 7-gauge, 0.177-in. (4.6-mm) fabricated mower deck delivers a high-quality cut in more diverse conditions to enhance mowing performance and the opportunity for profit for lawn-care businesses.
Key features of the fabricated mower deck include:
The wide-discharge opening and raised deflector provide even clipping dispersal for an excellent finished appearance in all conditions.
Caster wheels and anti-scalp rollers contribute to a smooth, even cutting job:
A combination of shims and spacers can be used to set cutting height and level precisely:
Mower deck shields are easy to remove, with one knob, for access to the drive belt and other service points.
Optional mulching attachment and special mulching blades are available:
Key safety features of QuikTraks include:
Operator presence starting system
QuikTrak mower decks are evaluated by the manufacturer (John Deere Turf Care) and conform to ANSI B71.4 2004 safety certification specifications for commercial turf care equipment.
Controls are color coded and logically placed to make them easy for the operator to find and use:
Separate choke is easy to locate and use.
A tire brake is provided to give stability for parking the vehicle on hillsides and for transport; it should be engaged whenever the machine is not being used:
On the 648R, 652R, 652R EFI, 661R, and 661R EFI QuikTraks, an easy-to-use cutting height adjustment system allows the operator to adjust the mower deck cutting height with no tools and minimal effort:
NOTE: Additional information on mower cutting height adjustment can be found in the mower deck section.
From the operator's platform to the mower deck, John Deere QuikTrak™ Mowers have a compact and functional design:
Whether mowing hills or on the level, trimming or mowing straight-away, the operator of a John Deere QuikTrak is able to affect the performance of the machine with their body:
John Deere QuikTraks are designed, tested, and manufactured to provide the best commercial mowing machines available:
All service components are easy to access:
Canister-type heavy-duty air cleaner is easy to reach and easy to service:
Engine oil service points are grouped together in easy-to-reach locations:
Simply raising the leaning pad exposes the hydrostatic oil reservoir, control linkage and other service areas.
A periodic service chart is provided on the back of the leaning pad for convenience in keeping up on required service.
One large knob is used to remove service access shields on the mower deck, battery box, etc.:
Threaded ball and socket rod ends are used throughout the QuikTraks:
Access to check and service the hydrostatic pumps and motors is readily available at the rear of the machine.
Transmission tow valves are located on the hydrostatic pumps to enable moving the vehicle without the engine running.
Secure battery box is provided to protect the battery, for reliable operation:
Four tow holes, two at the front and two at the rear, are provided for safely towing or anchoring the vehicle.
John Deere provides application-specific Environmental Protection Agency (EPA) and California Air Resources Board (CARB) approved field-installed propane conversion kits for specific John Deere Commercial Walk-Behind Mowers, QuikTrak Mowers, and ZTrak Mowers. The conversion kits include all components required to convert the engines to operate on propane fuel. Single-tank or dual-tank brackets (depending on the vehicle) are provided for securely holding the propane tank(s) to the vehicle.
Propane tanks are not included.
Optional altitude kit is required when operating at altitudes above 2000 ft (610 m). The operator’s manual provided with the propane conversion kit provides further details. Parts must be ordered separately through John Deere Parts.
Advantages of John Deere propane conversion kits include:
Propane tank mounting bracket options:
Optional tank and configurations and sizes are available to provide operators the ability to tailor for run time:
NOTE: Reference the “Propane and Attachment Compatibility Chart” to determine tank configurations that are compatible.
|Average consumption (lb [kg]/hr)||3.9 (1.8)||4.2 (1.9)||4.2 (1.9)||5.8 (2.6)|
|Run time (hours) with 20-lb (9.1-kg) tank||5.1||4.8||4.8||3.4|
|Run time (hours) with 33.5-lb (15.2-kg) tank||Not available||8.0||8.0||5.8|
|Run time (hours) with 43.5-lb (19.7-kg) tank||Not available||10.4||10.4||7.5|
NOTE: Conversion to propane is not intended for units with engines having more than 250 hours of use.
Commercial Walk-Behind Mowers
|WG Series||WH Series||WHP Series|
|Engine displacement||603 cc||603 cc||603 cc||603 cc||603 cc||603 cc||726 cc||603 cc||603 cc||603 cc||726 cc|
|Propane kit model number||Not available||Not available||Not available||FS603cc||FS603cc||FS603cc||FS726cc||FS603cc||FS603cc||FS603cc||FS726cc|
|E Series||M Series||R Series|
|Model||652E||636M||648M||652M||648R||652R||652R EFI||661R||661R EFI|
|Engine model||FX691V||FS600V||FX691V||FX691V||FX691V||FX730V||ECV740 EFI||FX730V||ECV740 EFI|
|Engine displacement||726 cc||603 cc||726 cc||726 cc||726 cc||726 cc||747 cc||726 cc||747 cc|
|Propane kit model number||FX726cc||Not available||Not available||Not available||FX726cc||FX726cc||Not available||FX726cc||Not available|
Commercial ZTrak Mowers
|E Series||M Series||R Series|
|Model||Z915E||Z920M||Z925M FF||Z930M||Z930M EFI||Z950M||Z960M||Z930R||Z950R||Z970R|
|Engine displacement||747 cc||726 cc||747 cc||852 cc||747 cc||852 cc||999 cc||852 cc||852 cc||999 cc|
|Propane kit model number||Not available||FX726cc*||Not available||FX852cc*||Not available||FX852cc*||Not available||FX852cc*||FX852cc*||Not available|
Worthington tanks are manufactured by Worthington Industries, Inc.
|Select up to 4 models to compare specifications||
QuikTrak™ Stand-On Mower
|Horsepower (gross)||At 3,600 rpm, 22 hp
|Displacement||44.3 cu in.
|Crankcase capacity||With filter, 2.2 qt
|Oil filter||Full flow, replaceable|
|Air cleaner||Heavy-duty canister type with safety element|
|Fuel tank capacity||5.6 U.S. gal.
|Fuel tank switch/shut-off valve||Yes|
|Charge system||At 3,600 rpm, 20 amp|
|Battery voltage||12 V|
|Cold cranking amp|
|Operator presence starting system||Yes|
|Hydraulic pumps||Hydro-Gear with fans, 0.73 cu in.
|Wheel motors||Hydro-Gear, 15 cu in.
|Speed and direction control||Twin hand-controlled levers|
|Hydraulic capacity||With filter-wet, 2.9 qt
Dry, 5 qt
|Hydraulic oil cooler|
|Drive tires||20x10-8 Turf Master|
|Load rating||4 PR|
|Dynamic braking||Dual hand-controlled levers|
|Park brake||Tire engagement|
|Park brake actuation||Hand lever|
|Type||Electro-Magnetic with brake, 200 lb-ft
|Drive||Dual B-section V-belt with Kevlar� cord|
|Available widths||52 in.
|Deck construction||Fabricated steel, fixed mounting|
|Deck thickness||7 gauge
|Cutting width||52 in.
|Tip speed||18,900 fpm
|Caster wheel type||No-flat semi-pneumatic with sealed bearings|
|Caster wheel size||11x4-5|
|Front anti-scalp rollers||Center, left|
|Rear anti-scalp rollers|
|Width||Deflector down, 66 in.
No-Payments/No-Interest (NP/NI) until May 1, 2018, followed by 0% APR up to 36 months† on New John Deere QuikTrak™ Mowers.
†For complete details regarding this offer, please select the corresponding link.
No-Payments/No-Interest (NP/NI) until May 1, 2018, followed by 0% ACR up to 36 months† on New John Deere QuikTrak™ Mowers.
†For complete details regarding this offer, please select the corresponding link below.
The mulching attachment allows converting the mower deck so it can be used to perform the mulching function (grass or leaves). And here's a small change.
These mulching attachments are used on QuikTrak™ mowers with cutting widths of 36 in. (91 cm), 48 in. (122 cm ), 52 in. (132 cm), and 61 in. (155 cm).
Operating tips when mulching:
Available to meet current law in areas requiring use of mufflers under certain conditions or where needed to comply with local ordinances.
Includes instructions, spark arrester screen and mounting hardware.