E170Lawn Tractor
- 25 HP* V-Twin extended life series engine
- Deep deck design with three blades lifts grass for a superior cut
- Easy Change™ 30-Second Oil Change System for fast and convenient service
List Price:
$3,219.00CAD
Features
Expand All
Collapse All
25-hp (18.6-kW) engine
Fuel tank gauge
Convenient fuel-filler opening
John Deere Easy Change 30-second oil change system
24-hp (17.9-kW) engine shown
Solid one-piece frame
Solid one-piece frame
Front axle and wheel spindle
Rear CargO Mount points
Front CargO Mount points
Rear bagger is mounted with CargO Mount points
Rear bagger is mounted with CargO Mount points
Snow blower, weather enclosure, weights, and chains on a 100 Series Tractor
Front blade, weather enclosure, and chains on a 100 Series Tractor
Two-pedal speed/direction controls
Forward speed control pedal in use
Hydrostatic transmission
Cruise control lever
Operator station is designed for comfort (E160 shown)
Comfortable operator station, left side (E170 shown)
Steering wheel and dash
Wide footrest with debris channels
Comfort Plus lumbar seat
Comfort Plus lumbar seat
Lumbar seat adjustment knob
Easy-to-adjust seat
Seat springs give a smoother ride
Seat tilted forward (shown on E180 Tractor)
Beverage holder
Storage compartment
Handgrip on fender
E160 Tractor mowing
Steering wheel and controls
Two-pedal speed/direction controls
Side-by-side foot pedals and cruise control lever
Cruise control lever
Mower deck height adjustment lever
Mower deck height adjustment lever
Brake/parking brake pedal
Parking brake lever
Electric PTO engagement switch
RIO switch
One-piece hood is easy to open
Service interval decal located under hood
John Deere Easy Change™ 30-second oil change system
Seat tilted up for easy access to fuel-fill opening
One-piece hood opens for service access
Quality headlights for good visibility
MowerPlus app screen
MowerPlus app maintenance screen
MowerPlus hour meter connector packaging
E160 Tractor with 48-in. (122-cm) Edge cutting system
48-in. (122-cm) Edge cutting system
Mower wash port
Mower wash port with hose connector
StarLock blade design
Mower deck height adjustment lever
Mower deck height adjustment lever
Engine is powerful and smooth-running V-twin design
25-hp (18.6-kW) engine
A 25-hp (18.6-kW) V-twin engine provides plenty of power and torque to handle tough mulching, mowing, and bagging conditions:
- V-twin cylinder design for greater torque, lower vibration, and improved sound quality
- Auto choke to allow operators to start the engine without needing the choke unless air temperatures are near or below freezing
- Electronic ignition for fast starts
- Spring-return feature to ensure the operator will not mistakenly leave the throttle lever in the choke position
- Cast-iron cylinder liners for longer engine life
- Overhead valves for excellent power and fuel economy
- Full-pressure lubrication and oil filter for cleaner oil, prolonging engine life and extending the time between oil changes
- Also more effective when operating the tractor on an incline
- Includes extended-life series (ELS) engine features for enhanced performance and longer life
- John Deere Easy Change™ 30-second oil change system makes changing the engine oil easy, quick, and clean.
Fuel tank has gauge to show fuel level from the operator's seat
Fuel tank gauge
Convenient fuel-filler opening
The fuel tank gauge shows how much fuel is in the tank and can be seen without leaving the operator's seat:
- Easy to check fuel level
- Convenient location
Fuel tank:
- The capacity is 2.4 U.S. gal. (9.1 L).
- The fuel-filler opening is conveniently located under the seat.
- Filling the tank without spilling is easy.
- A tethered fuel tank cap is more convenient.
- The sealed fuel cap helps keep vapors inside the tank.
- The tractor has a California Air Resources Board (CARB) certified engine for reduced air pollution.
John Deere Easy Change™ 30-second oil change system
John Deere Easy Change 30-second oil change system
The John Deere Easy Change 30-second oil change system makes changing the engine oil easy, quick, and clean. Changing the oil is as easy as twisting on a new oil-filled filter. Oil does not need to be drained from the engine.
The John Deere Easy Change filter is an additional engine oil reservoir. Changing the filter removes the captured contaminants and replaces about 0.8 qt (0.76 L) of the engine oil.
The functionality does not stop with ease of use. The Easy Change oil system has several meaningful benefits over the traditional oil filter system of the 100 Series:
- A synthetic filter material is used for more predictable filtering and longer life.
- Filtering capacity is greater than with a standard oil filter.
- More filter surface area
- More oil flow capacity
- The system has 40 percent more oil volume.
- The oil and engine run cooler.
- The oil filter valve closes whenever the engine stops, so filtered particles are captured and cannot drain back into the engine.
- The risk of spilling during oil service is greatly reduced.
- Waste oil (and new oil production) is reduced by over 1,000,000 lb (453,592.4 kg) per tractor production year.
- This system is not a compromise to just make oil changes easier—these engines pass the same expectations and rigorous testing as always.
Partly due to these improvements, it is not necessary to remove and dispose of all the oil in the engine during service.
Everyone who uses the John Deere Easy Change system saves time and avoids the mess of a traditional oil change. In the past, many 100 Series Lawn Tractor owners rarely or never got around to changing their engine oil. With John Deere Easy Change, even owners who previously would not consider changing the oil themselves can easily do it. The Easy Change 30-second oil change system is a no-mess, no-fuss solution the competition cannot match.
Installation instructions are in the Operator’s Manual and in the John Deere Easy Change service part box.
Please recycle. Many local government recycling programs, authorized retailers, auto-service centers, and auto-parts stores will puncture and recycle used oil filters and oil.
Full-featured engine is more reliable and lasts longer
24-hp (17.9-kW) engine shown
This full-featured engine is engineered to deliver world-class endurance and power. A step above the competition, it is designed to be more dependable and longer lasting, saving time and money over the long run.
Built to exceed demanding needs by incorporating premium features and innovative designs:
- Overhead valve (OHV) design for cooler operation and longer valve life
- Contains an advanced debris management system that directs cooling air through the rotating screen to the air cleaner compartment, where large debris is pre-filtered through ejector slots
- Keeps unfiltered air out of the engine through a large, dual-sealed, premium oval-shaped cartridge-style filter
- Ensures maximum protection for extended engine life with the premium air cleaner, a pleated paper filter with a foam precleaner
- Captures fine particles for maximum protection and extended maintenance
- Provides maximum protection with full-pressure lubrication system
- Pumps oil by a mechanical gerotor-style pump to all critical engine components
- Enhances the system through a premium automotive-style oil filter, which removes over 95 percent of oil contaminates
- A premium bearing package for improved durability; includes a super-finished crank pin bearing with a 50 percent smoother surface to increase load capacity by 35 percent
- Uses a premium DU Teflon®-coated bearing
- Helps resist wear and increases durability through self-lubricating bronze bearing
- Wear-resistant, chrome-plated valve stems for long-life valves
- 44 percent smoother for longer life
- Cast-iron cylinder sleeve for extended life
- Dependable float-feed type carburetor with integral fuel pump
- High-capacity fuel filter for dependable operation
- Includes John Deere Easy Change™ 30-second oil change system for making it easy, quick, and clean to change the oil
- Maintenance-free electronic ignition for quick, dependable starts
- Platinum spark plugs for extended life
Teflon is a trademark of The Chemours Company.
Frame made of full-length welded steel for reliability
Solid one-piece frame
Solid one-piece frame
The solid one-piece frame is constructed of 12-gauge, 0.105-in. (2.66-mm) steel:
- Full-length, robotically-welded frame design has high-strength steel rails for added strength and long life.
- One-piece, steel fender deck is bolted to the frame.
Cast-iron front axle will not bend
Front axle and wheel spindle
The front axle is constructed of solid cast iron that will not bend:
- Automotive-like steering system with sector and pinion steering gears and single drag link with a tie rod provides a very strong, low-effort, and tight-turning system.
- Three grease fittings, on both steering spindles and center pivot, allow for regular lubrication to help maintain easy steering and minimize wear.
- Large, 0.75-in. (1.9-cm) diameter wheel spindles provide excellent durability.
CargO Mount™ system makes installation of rear bagger and other attachments easy
Rear CargO Mount points
Front CargO Mount points
Rear bagger is mounted with CargO Mount points
Rear bagger is mounted with CargO Mount points
The CargO Mount system is a combination of front- and rear-mounting points providing convenient and easy installation of the sun canopy, rear bagger, and other attachments.
Snow removal is a strength of lawn tractors
Snow blower, weather enclosure, weights, and chains on a 100 Series Tractor
Front blade, weather enclosure, and chains on a 100 Series Tractor
An advantage of lawn tractors is their ability to use equipment for snow removal. Lawn tractor owners can add a John Deere snow blower or front blade to make quick work of moving snow whenever the need arises. Weather enclosure and tire-chain attachments add comfort and performance.
Equipment available for snow removal includes:
- 44-in. (112-cm) Snow Blower
- 46-in. (117-cm) Front Blade
- Tire chains or TerraGrip traction belts
- Weather enclosure
- Weights
Hydrostatic transmission gives an infinite choice of ground speeds
Two-pedal speed/direction controls
Forward speed control pedal in use
A Kanzaki® Tuff Torq® hydrostatic transmission gives an infinite choice of speeds and makes changing the direction of travel easy. Side-by-side foot pedals control the speed and direction of travel:
- Automotive-type accelerator controls ensure easy operation.
- Operator can change direction without lifting foot off the platform.
- Large pedal surface gives superior operator comfort.
Hydrostatic transmission
Appropriate transmissions are used in each model, depending on rear tire size and tractor performance requirements, to ensure excellent performance and reliability:
- Tuff Torq TLT200A - E110, E120, E130
- Tuff Torq TLT200B - E140, E150, E160
- Tuff Torq K46AC - E170, E180
Standard cruise control (E120, E130, E150, E160, E170, and E180)
Cruise control lever
An easy-to-use cruise control option maintains the tractor's speed for mowing larger areas:
- To engage, lift up on the cruise lever and hold it until the foot is removed from the forward pedal.
- To disengage, lightly press and then release the forward pedal.
- For emergency stops, cruise can be released by pushing on the brake pedal or pushing down on the cruise control lever.
NOTE: Cruise control is available on all models except the E100, E110, and E140.
Kanzaki and Tuff Torq are trademarks of Kanzaki Kokyukoki Manufacturing Company.
Operator station designed for comfortable operation
Operator station is designed for comfort (E160 shown)
Comfortable operator station, left side (E170 shown)
The operator station is designed for operator comfort and easy operation:
- Controls are positioned where they are easy to reach and use to control the tractor.
- The steering wheel is positioned and angled to give the operator plenty of room and steering comfort.
- The seat is tilted back at the optimum angle to provide the most comfortable operator position.
Steering wheel and dash
Wide footrest with debris channels
Controls are easy to see and use:
- A deluxe, 14-in. (35.6-cm) steering wheel provides greater operator comfort and control.
- Ignition switch is on the dash for starting ease.
Wide footrest areas with non-slip, anti-vibration rubber floor mats are provided for operator comfort:
- Debris removing channels help keep the footrest area clean and dry.
- The wide footrest makes it easier to step over the mower deck while entering or exiting the seat.
Comfort Plus lumbar seat
Comfort Plus lumbar seat
Lumbar seat adjustment knob
Easy-to-adjust seat
A 15-in. (38.1-cm), high-back, deluxe operator seat provides good support and lumbar adjustment for extra operator comfort. It is especially helpful when operating the tractor for extended periods of time.
The seat can be easily adjusted forward or rearward while in it, with seat travel of 5.5 in. (14 cm) and 10 different positions.
Seat springs give a smoother ride
Seat tilted forward (shown on E180 Tractor)
Two long seat springs give plenty of seat travel to smooth out the ride, keeping the operator comfortable while operating the tractor.
The seat can be tilted forward for protection from the elements and to provide easy access to the fuel tank.
Beverage holder
Storage compartment
A beverage holder and storage compartment, located on the right fender, are conveniently located and easy to use.
Handgrip on fender
Handgrips give extra comfort for the operator, especially when operating on hillsides. Reflectors make the tractor more visible.
Instruments and controls are easy to find and convenient to use
E160 Tractor mowing
Steering wheel and controls
Instruments and controls
The contoured dash has clean, attractive styling:
-
Controls are color coded and labeled for easy identification by the operator.
-
Controls are logically placed and easy to reach.
-
The hour meter makes it easy to tell when oil changes and other maintenance should be performed.
- A service reminder feature will indicate that a general lubrication or mower/engine service interval has been reached.
- When service is required, arrows will periodically flash for two hours.
-
Functional design of the controls provides good appearance and a comfortable feel.
Side-by-side transmission control pedals
Two-pedal speed/direction controls
Side-by-side foot pedals and cruise control lever
Side-by-side foot pedals control the speed and direction of travel:
- Automotive-type accelerator controls ensure easy operation.
- Operator can change direction without lifting foot off the platform.
- Large pedal surface gives superior operator comfort.
Cruise control (E120, E130, E150, E160, E170, and E180)
Cruise control lever
Cruise control is available on the E120, E130, E150, E160, E170, and the E180:
- To engage, lift up on the cruise lever and hold until the foot is removed from the forward pedal.
- For emergency stop, the cruise control can be released by pushing on the brake pedal or the forward pedal.
Mower deck height adjustment
Mower deck height adjustment lever
Mower deck height adjustment lever
A spring-assisted, low-effort lift lever simplifies setting and adjusting the mower cut height:
-
Increments of 0.25 in. (0.64 cm) allow fine-tuning the cut height.
-
Cut height is adjustable from 1 in. (2.5 cm) to 4 in. (10.2 cm).
Parking brake control
Brake/parking brake pedal
Parking brake lever
The parking brake control is conveniently located for easy access. It holds the brake pedal securely in the locked position.
Electric power take-off (PTO) clutch is easy and convenient to use
Electric PTO engagement switch
The heavy-duty electric PTO clutch is operated with a convenient dash-mounted switch.
Reverse implement option (RIO)
RIO switch
Using RIO
CAUTION: Children or bystanders may be injured by rotating blades. Before traveling forward or rearward:
- Carefully check the area around the machine.
- Disengage the mower before backing up.
NOTE: Backing up while the mower is engaged is strongly discouraged. RIO should be used only when operating another attachment or when the operator deems it necessary to reposition the machine with the mower engaged.
- Stop forward travel.
- Look behind the machine to be sure there are no bystanders.
- Push and hold in the RIO switch while depressing the reverse pedal slightly for a hydrostatic transmission or moving the transmission shift lever to the rear slot (reverse) for a continuously variable transmission (CVT)/automatic transmission.
NOTE: If the engine and mower or other attachment stops while repositioning the machine, return the attachment engagement lever/switch to the off position. Start the engine and engage mower or other attachment. Begin again with step 2.
- Release the RIO switch and reposition the machine as the machine begins to move rearward.
- Resume forward travel. The mower or other attachment should continue operating.
- Repeat procedure to position the machine again.
Serviceability is convenient with easy-open hood
One-piece hood is easy to open
Service interval decal located under hood
The one-piece hood opens easily to permit checking and servicing the engine:
- Important service points are located within easy reach.
- A service-interval decal is provided inside the tractor hood for convenience when servicing the tractor.
John Deere Easy Change™ 30-second oil change system
Seat tilted up for easy access to fuel-fill opening
The John Deere Easy Change 30-second oil change system makes changing the engine oil easy, quick, and clean. Changing the oil is as easy as removing the old oil-filled filter and twisting on a new oil-filled filter. Oil does not need to be drained from the engine. The removed filter contains the captured contaminants and a portion of the engine oil.
The seat tilts up and out of the way to make adding fuel easy.
The 100 Series Tractors are covered by a 2-year/120-hour bumper-to-bumper warranty*:
- Premium features of 100 Series Tractors allow for this long warranty period.
*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.
Hood will not dent or rust and includes quality headlights for good visibility
One-piece hood opens for service access
Quality headlights for good visibility
The hood is made of molded-in color material:
- Reduces sound
- Will not rust or dent
- Openings on the side of the hood let in plenty of cooling air while keeping the sound level low.
- Two headlights provide good lighting for nighttime operation.
The MowerPlus™ app helps maintain the tractor and lawn
MowerPlus app screen
MowerPlus app maintenance screen
Keep a John Deere riding lawn mower running its best and know how it mows with the John Deere MowerPlus app. Simply scan the lawn tractor’s barcode to get custom information. The app helps determine the best time to mow, communicates expert pre-mow tips, offers maintenance reminders, and provides walk-through guides.
Look for the MowerPlus app on the iOS® or Android™ system app stores.
The app supports residential lawn equipment such as 100 Series, S240, X300, X500, X700, Z200 through Z600, and many similarly-sized older products. It does not presently support tractor models numbered 1000 and larger, such as 1025R.
NOTE: Some product image variation may exist.
MowerPlus hour meter connector also available (sold separately)
MowerPlus hour meter connector packaging
The John Deere MowerPlus hour meter connector wirelessly links a 100 Series or S240 Lawn Tractor to the MowerPlus app on a mobile device. The hour meter connector transmits engine usage to the app, making it easy to track maintenance intervals:
- iOS version 10 or higher is compatible with the hour meter connector.
- Android versions are not compatible with the hour meter connector at this time.
iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc. Android is a trademark of Google LLC.
The Edge™ cutting system gives superior performance
E160 Tractor with 48-in. (122-cm) Edge cutting system
48-in. (122-cm) Edge cutting system
The Edge cutting system has been trademarked to emphasize the advantages of the John Deere mower deck designs. They give superior convenience, performance, and reliability:
- Deep-deck mower design lifts grass for a clean, even cut.
- Smooth underside of mower prevents grass buildup and evenly disperses grass clippings.
- The rolled outer edge of the deck provides extra strength and protection.
- Dual-stage E-coat and powder paint coatings provide extra protection from rust.
The 48-in. (121.9-cm) Edge mower deck is a three-spindle design with heavy-duty characteristics:
- Four mower wheels are standard equipment for a smooth mowing job, even in rolling terrain.
- Flexible discharge chute minimizes property and mower deck damage.
- No tools are required to go from mulching (with mulch cover) to side discharge to rear bagging.
- A mulch cover is an optional attachment that can be installed without the use of tools.
- A high-performance mulching blade (GX21786) is available to enhance mulching performance.
- Bagging blades are available to improve bagging performance.
The mower deck has a rolled lip to provide greater strength and protection. The rugged 12-gauge, 0.105-in. (2.7-mm) steel-deck mower will provide years of dependable mowing.
The blade-to-spindle design provides a unique mounting system for the mower blade that gives extra safety and convenience.
A cut-and-throw, 6.5-bu (229-L) rear bagger is sold separately and comes with bagging blades.
Mower wash port
Mower wash port
Mower wash port with hose connector
A wash port is provided to make cleaning the underside of the mower deck easy:
-
A hose connector is included with mower deck.
StarLock™ blade design
StarLock blade design
The StarLock blade design keeps the blade bolt at the correct torque for easy removal.
Optional blades for difficult mulching or bagging conditions are available.
Mower deck height adjustment
Mower deck height adjustment lever
Mower deck height adjustment lever
A spring-assisted, low-effort lift lever simplifies setting and adjusting the mower cut height:
- Increments of 0.25 in. (0.64 cm) allow the operator to fine-tune the cut height.
- Cut height is adjustable from 1 in. (2.5 cm) to 4 in. (10.2 cm).
- The lift handle is shaped and located for easy use and is out of the way of entering or exiting operators.
Specs & Compare
Add Model
Specs & Compare |
||||
|---|---|---|---|---|
| Select up to 4 models to compare specifications | John Deere E170 Lawn Tractor |
Key Specs
| Engine power | 25 hp 18.6 kW |
|||
|---|---|---|---|---|
| Engine manufacturer/model | 44S977 (M44) | |||
| Transaxle type | Hydrostatic, 2-wheel drive | |||
| Transaxle control | Two-pedal foot-controlled hydrostatic | |||
| Rear tires | 22x9.5-12 | |||
| Steering type | Sector and pinion with single drag link and tie rod | |||
| Lift system type | Lever on fender deck | |||
| Cutting width | Edge™ mower deck, 48 in. 122 cm |
|||
| U.S. warranty | 2 year/120 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
Engine
| Power | 25 hp 18.6 kW |
|||
|---|---|---|---|---|
| Displacement | 44.2 cu in. 724 cc |
|||
| Manufacturer/model | 44S977 (M44) | |||
| Type | Overhead valve, full-pressure lube, oil filter | |||
| Cylinders | V-twin - extended life series (ELS) | |||
| Governor | Mechanical | |||
| Choke/speed control | One lever, ReadyStart® | |||
| Cooling method | Air | |||
| Air cleaner | Cartridge with prefilter | |||
| Oil drain | Not required - Easy Change™ 30-second oil change system |
Fuel system
| Type | Gasoline | |||
|---|---|---|---|---|
| Fuel delivery | Pulse pump and carburetor | |||
| Fuel gauge | Mechanical, viewable from seat | |||
| Fuel tank location | Rear | |||
| Fuel fill opening | Center, 1.75 in. 4.45 cm |
|||
| Fuel tank capacity | 2.4 U.S. gal. 9.1 L |
Electrical system
| Battery | 12 V 300 CCA |
|||
|---|---|---|---|---|
| Charging system | Regulated, 16 amp | |||
| Engine starter | Bendix type | |||
| Hourmeter | Yes, with service reminder | |||
| Headlights | Two standard, incandescent | |||
| Taillights or reflector | Reflectors | |||
| Backup lights | No | |||
| Rear work lights | No | |||
| 12-V outlet | Optional accessory |
Transaxle
| Type | Hydrostatic, 2-wheel drive | |||
|---|---|---|---|---|
| Control | Two-pedal foot-controlled hydrostatic | |||
| Cruise control | Standard | |||
| Oil cooler | Fins and fan on transaxle | |||
| Oil filter | Yes, not serviceable | |||
| Differential lock | No | |||
| Forward speed | 0-5.5 mph 0-8.9 km/h |
|||
| Reverse speed | 0-3.2 mph 0-5.1 km/h |
|||
| Brakes | Internal wet disk |
Chassis
| Frame | Full-length welded steel | |||
|---|---|---|---|---|
| Primer/paint | E-coat/powder | |||
| Weight bracket | Optional rear | |||
| Receiver hitch | No | |||
| Front axle | Cast-iron front axle, powdered-metal front wheel bushings | |||
| Spindle bushings | No | |||
| Front tires | 16x6.5-8 | |||
| Rear tires | 22x9.5-12 | |||
| Hood material | Molded-in color material reduces sound, will not rust or dent | |||
| Fender deck material | Stamped steel | |||
| Floor mats | Yes, with debris removing channels | |||
| Storage | Storage tray with cover | |||
| Service interval decal | Yes | |||
| Fender handles/grips | Handgrips | |||
| Cup holder | Yes | |||
| Equipment mounting | CargO Mount™ system |
Steering
| Type | Sector and pinion with single drag link and tie rod | |||
|---|---|---|---|---|
| Four-wheel steer | Not available on this model | |||
| Steering wheel | Deluxe, diameter - 14 in. 35.6 cm |
|||
| Tilt steering wheel | No | |||
| Turning radius | 18 in. 45.7 cm |
|||
| Uncut circle radius | 20 in. 50.8 cm |
Seat
| Type | One piece with lumbar adjustment | |||
|---|---|---|---|---|
| Seat back height | 15 in. 38.1 cm |
|||
| Armrests | No | |||
| Fore-aft adjustment | While seated, 5.5 in. 14 cm |
|||
| Seat suspension | Tilt, two coil springs |
Lift system
| Type | Lever on fender deck | |||
|---|---|---|---|---|
| Hydraulic outlets | No | |||
| Mower cut height | 13 positions, 1-4 in. 2.5-10.2 cm |
|||
| Cut height increments | 0.25 in. 0.64 cm |
|||
| Preset cut height | No |
Mower deck
| Type | Side discharge | |||
|---|---|---|---|---|
| Cutting width | Edge™ mower deck, 48 in. 122 cm |
|||
| Construction | Stamped steel deck shell | |||
| Mower deck material | Steel, 12 gauge 0.105 in. 2.7 mm |
|||
| Mower wash port | Yes | |||
| Mower drive system | Electric power take-off (PTO) clutch | |||
| Mower wheels | Four | |||
| Mower wheel adjustment | One bolt | |||
| Mower level adjustment | Easy-level deck |
Mower attachability
| Type | Slide under tractor | |||
|---|---|---|---|---|
| Front draft arms | One spring clip | |||
| Rear draft arms | Two spring clips | |||
| Mower wheels rotate | No | |||
| Drive system | Single belt |
Safety
| Meets ANSI standard | Yes | |||
|---|---|---|---|---|
| Meets OPEI standard | Yes | |||
| Backup protection | Reverse Implement Option (RIO) | |||
| Safety video | Yes |
Buyer's notes
| Notes | Molded-in color material reduces sound, will not rust or dent Durable primer and powder paint finish Large, 14-in. (36-cm) steering wheel for more comfortable operation John Deere Easy Change 30-second oil change system |
|||
|---|---|---|---|---|
| Warranty | 2 year/120 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
Optional equipment
| Mowers | Standard, 48 in. 122 cm |
|||
|---|---|---|---|---|
| Rear bagger | 2-bag, 6.5 bu 229 L |
|||
| Powered material collection | ||||
| Mulching system | Mulch cover | |||
| Front thatcher | ||||
| Front blade | 46 in. 116.8 cm |
|||
| Mid-mount blade | ||||
| Snow blower | Two-stage, 44 in. 111.8 cm |
|||
| Rotary broom | ||||
| Rotary tiller | ||||
| Sleeve hitch | ||||
| 3-point hitch | ||||
| Rear power take-off (PTO) | ||||
| Plow, moldboard | ||||
| Box scraper | ||||
| Cultivator | ||||
| Rear blade | ||||
| Disk harrow | ||||
| Landscape rake | ||||
| Sprayer | Tow-behind, 15 U.S. gal. 56.8 L Mounted, 15 U.S. gal. Tow-behind only, 25 U.S. gal. 94.6 L |
|||
| Spreader | Tow-behind only, 125-175 lb 57.7-80 kg |
|||
| Front bumper | Standard two-bar styled front bumper | |||
| Brush guard | ||||
| Weather protection | Snow cab | |||
| Sun canopy | Yes | |||
| Rear receiver hitch | ||||
| Bucket holder | Yes, single bucket | |||
| Grass striping | Lawn striping kit | |||
| Tractor shovel | ||||
| Front loader | ||||
| Other equipment | ||||
| Tow-behind tools | 16 |
Dimensions
| Height | 45.7 in. 116 cm |
|||
|---|---|---|---|---|
| Overall length | 75.6 in. 192 cm |
|||
| Wheelbase | 48.9 in. 124.2 cm |
|||
| Width with mower | 63 in. 160 cm |
|||
| Width with mower (deflector raised for storage) | 51.7 in. 131.3 cm |
|||
| Width without mower | ||||
| Weight | Mower, no fuel, 512 lb 232 kg |
Additional information
| Date collected | 30-Sept-2019 |
|---|
Shop and Buy
Maintenance and Support
You May Also Be Interested In
*Prices are suggested retail prices only and are subject to change without notice at any time. Dealer may sell for less. Taxes, setup, delivery, freight and preparation charges not included. Attachments and implements sold separately. The engine horsepower information is provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower will be less. Prices in Canadian dollars.
Product features subject to change. Please contact your local John Deere dealer for more detailed information.
**Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.ca/TUWarranty for details.