H165Loader
- Compatible with 3R Series Tractors
- Quik-Park™ mounting system for efficient attachment and removal
- Quik-Change attachment carrier makes it easier and faster to move from chore to chore
- 1,122 pounds (509 kg) lift capacity
Features
Expand All
Collapse All
Quik-Park loader mounting system
Quik-change attachment carrier
Close up of grease fitting
Pivot point grease fitting locations
Quik-Park™ loader mounting system
Quik-Park loader mounting system
The H-Series Loaders are designed for easy removal and mounting to and from the tractor without tools.
The parking stand, attached to the front frame of the tractor, is an integral part of the loader during loader operation.
The parking stand lowers into position by moving the joystick to the raised position once the latches are opened. This allows the loader to move to the parked position.
To view a video of how the Quik-Park™ system works click here.
NOTE: This video only shows the dismount and mount of the loader without disconnecting the hydraulics. To completely remove the loader, the operator must turn the tractor off, relieve the hydraulics, and then disconnect the hoses from the couplers.
Quik-change attachment carrier
Quik-change attachment carrier
Allows fast, easy removal/mounting of attachments without tools.
End-of-pin lubrication means easy maintenance
Close up of grease fitting
Pivot point grease fitting locations
All pivot points on the loader have grease fittings that are accessible from the side of the loader to make greasing the loader much easier, ensuring that all grease points are more likely to be serviced. No more searching for grease points that are hard to find. Removing the grease gun from the grease fitting or zerk is not a problem either as sufficient radius has been left to allow the grease gun tip to be rotated to the side for removal from the fitting or zerk.
Specifications
Add Model
| Specifications | ||||
|---|---|---|---|---|
| Select up to 4 models to compare specifications | John Deere H165 Loader |
Key Specs
| Maximum lift height (A) | 2593 mm 102 in. |
|||
|---|---|---|---|---|
| Lift capacity at full height | Measured at pivot (U) 725 kgf 1598 lbf Measured at 500 mm ahead of pivot (V) 509 kgf 1122 lbf |
|||
| Boom breakout force | Measured at pivot (Y) 1509.1 kgf 3327 lbf Measured at 500 mm ahead of pivot (Z) 1096 kgf 2416 lbf |
|||
| Bucket rollback force capacity | At ground-level line (ZZ) 1400.2 kgf 3087 lbf |
|||
| Clearance at full height - bucket dumped (C) | 2024 mm 79.6 in. |
|||
| Dump angle, degrees (E) | 41.1 degree (angle) | |||
| Rollback angle, degrees (G) | 31 degree (angle) |
Tractor
| Model | 4310 | |||
|---|---|---|---|---|
| Front tire | 25X8.50-14 6PR R4 | |||
| Rear tire | 15.00-19 6PR R4 | |||
| Front axle configuration | ||||
| Wheelbase | 1727 mm 68 in. |
|||
| Pump capacity | 8.6 gpm | |||
| Rated pressure | 2500 psi |
Loader
| Base weight | 281.09 kg | |||
|---|---|---|---|---|
| Leveling configuration | ||||
| Bucket used | ||||
| Bucket weight | 93.8 kg 206.8 lb |
|||
| Lift capacity at full height | Measured at pivot (U) 725 kgf 1598 lbf Measured at 500 mm ahead of pivot (V) 509 kgf 1122 lbf |
|||
| Lift capacity at 59 in. (1500 mm) | Measured at pivot (W) 964 kgf 2125 lbf Measured at 500 mm ahead of pivot (X) 748 kgf 1649 lbf |
|||
| Boom breakout force | Measured at pivot (Y) 1509.1 kgf 3327 lbf Measured at 500 mm ahead of pivot (Z) 1096 kgf 2416 lbf |
|||
| Bucket rollback force capacity | At maximum height (VV) 811 kgf 1787 lbf At 59-in. (1500-mm) lift height (XX) 1349 kgf 2974 lbf At ground-level line (ZZ) 1400.2 kgf 3087 lbf |
|||
| Dimensions | Maximum lift height (A) 2593 mm 102 in. At full height - bucket level(B) 2388 mm 94 in. At full height - bucket dumped (C) 2024 mm 79.6 in. |
|||
| Overall length (I+F), ft (m) | 3.218 m 10.55 ft |
|||
| Overall height in carry position (J) | ||||
| Digging depth (H) | 143 mm 5.6 in. |
|||
| Reach | At maximum height (D) 562 mm 22 in. At ground level - bucket level (F) 1489 mm 58.6 in. |
|||
| Bucket angle | Dump angle, degrees (E) 41.1 degree (angle) Rollback angle, degrees (G) 31 degree (angle) |
|||
| Cycle times | Loader raise, seconds 3.56 seconds Loader lower, seconds 2.1 seconds Bucket dump, seconds 2.96 seconds Bucket rollback, seconds 1.75 seconds |
Additional information
| Date collected |
|---|
Shop and Buy
Maintenance and Support
You May Also Be Interested In
Product features are based on published information at the time of publication. Product features are subject to change without notice. Contact your local John Deere dealer for more information.